Milling
The increasing demand for complex materials and specific milling solutions is driving Tungaloy’s technological developments to create unique machining solutions, where high economic efficiency and productivity are imperative. Tungaloy’s innovative geometries and grades are designed to reach the highest standards in milling operations to overcome any machining challenge.
EXWX / HXWX / TXWX
High feed milling cutters featuring strong double-sided inserts with six cutting edges
ø16 – ø50 mm – (APMX): 1 mm
EXN / HXN / TXN
Ultimate high feed milling cutter series for maximum productivity
ø8 – ø200 mm – (APMX): 1.5 mm
EXLS / HXLS
Small-diameter high-feed milling cutter with robust design for stability and efficiency
ø8 – ø25 mm – (APMX): 0.5 mm
EXLN / HXLN / TXLN
Unique insert design to ensure high stability for incredible productivity
ø20 – ø63 mm – (APMX): 2 mm
HXSW / TXSW / EXSW
A new generation of high-feed milling cutter with high versatility
ø25 – ø160 mm – (APMX): 2.5 mm
TXQ
Super high-feed face milling cutter with 8 cutting-edge insert
ø50 – ø125 mm – (APMX): 2.0 mm
TAOW
Economical 8 edged inserts with light cutting face milling cutter
ø50 – ø160 mm – (APMX): 3 mm
TFMRN
High efficiency milling cutter with ceramic inserts for high temperature alloy machining
ø50.35 – ø67.37 mm – (APMX): 2 mm
TPYD / EPYD
High speed face milling cutter for finishing aluminum
ø40 – ø160 mm – (APMX): 4.5 mm
TPYP / EPYP
High speed face milling cutter for finishing aluminum
ø25 – ø125 mm – (APMX): 4 mm
THSN
Face Milling Cutter with 8 Cutting Edge Insert for Ultimate Clearance
ø50 – ø100 mm – (APMX): 9.5 mm
TASN
Highly-versatile face milling cutters for a wide variety of materials
ø50 – ø160 mm – (APMX): 6 mm
EEN / TEN
High-speed face milling with superior surface finish
ø32 – ø315 mm – (APMX): 6.4 mm
TFE / EFE
Solution for non-ferrous material machining
ø50 – ø125 mm – (APMX): 8 mm
LPSX
Indexable extended-flute cutters for high-efficiency rough milling operations of titanium alloy and cast iron parts
ø50 – ø66 mm – (APMX): 54 / 76.5 mm
EPTN / TPTN
Highly productive and cost-effective shoulder milling cutter
ø18 – ø160 mm – (APMX): 11 mm
EPA / HPA / TLA
Shoulder milling cutter with cost-efficient inserts and outstanding chatter stability
ø8 – ø160 mm – (APMX): 3.5 / 6 / 10 / 15 mm
EPTC / TPTC / LPTC
Highly productive roughing cutter with serrated edges
ø50 – ø100 mm – (APMX): 76 mm
EPAV / HPAV
Versatile shoulder milling cutter with unique V-shaped insert bottom for maximum productivity
ø6 – ø63 mm – (APMX): 11.5 mm
EPO / ELS / HPO / TPO / TLS
Excellent surface finish and wall accuracy in shoulder milling
ø12–160 mm – (APMX): 16.7 mm
EASD / ELD / EPD / TPD
Ideal tool for milling small parts on small machines
ø12 – ø40 mm – (APMX): 4 mm
EPQ / TPQ
Shoulder milling cutter with strong and smooth cutting edges
ø25 – ø160 mm – (APMX): 16 mm
TGM / EPM / TLM
Shoulder milling cutter for roughing on medium- to large-sized machines
ø32 – ø250 mm – (APMX): 15.1 mm
EPXV / TPXV / EPV / TPV
Shoulder mill that enables high speed machining of aluminum and non-ferrous materials
ø25 – ø125 mm – (APMX): 13 – 16 mm
S/ASG, A/H/TSV, A/H/TSW, A/TSN
Slot milling cutter series for stable operation with excellent chip control
ø63 – ø250 mm – (APMX): 14 – 82 mm
ERRQ / TRRQ / HRRQ
Radius cutter for profile milling of complex parts
ø40 – 80 mm – (APMX): 5/6/8 mm
EBRM / HBRM
Indexable ball endmills for rough profiling
ø16 – ø25 mm – (APMX): 17.7 mm
EXLN / HXLN / TXLN
Radius cutter for 3-dimensional machining due to helical cutting edges
ø20 – ø63 mm – (APMX): 2 mm
EBFM / HBFM
Indexable endmill for high-precision finishing
ø8 – ø32 mm – (APMX): 1.28 mm
HFWX
Profile milling cutter for semi-finishing to finishing with double-sided positive insert
ø16 – ø25 mm – (APMX): 1 mm
ERP / HRP / TRP
The most suitable for Radius cutter for profile milling of complex parts and non-ferrous material machining
ø20 – 66 mm – (APMX): 8 mm
TCB
Multifunctional counterboring tool with enriched tool diameter line up
ø10 – ø59 mm – (APMX): 10 mm
EVLX / HVLX
Multifunctional milling cutter with center cutting edge
ø12 – ø40 mm – (APMX): 18 mm
VSS / VTS / VSC / VST / VAD / VER
Endmill with exchangeable heads for reduced tool change time
ø5 – ø32 mm – (APMX): 38 mm
TEB / TEC / TECA / TECH / TECK / TECR
Powerful endmills with excellent performance
ø0.4 – ø25 mm – (APMX): 92 mm
Online shop |
|
Online shop Learn more |
e-Catalog |
|
e-Catalog Learn more |
Resources
Tungaloy APP
TUNG NaviTool recommendations for your specific needs
Machine Power Calculator
Turning Insert Selection Guide
MatrixTool management system