Fraisage

The increasing demand for complex materials and specific milling solutions is driving Tungaloy’s technological developments to create unique machining solutions, where high economic efficiency and productivity are imperative. Tungaloy’s innovative geometries and grades are designed to reach the highest standards in milling operations to overcome any machining challenge.

Fraisage grande-avance

DoFeedTri

EXWX / HXWX / TXWX

High feed milling cutters with six cutting edge inserts

ø16 – ø50 mm – (APMX): 1 mm

AddDoFeed / DoFeed

EXN / HXN / TXN

Ultimate high feed milling cutter series for maximum productivity

ø8 – ø200 mm – (APMX): 1.5 mm

TungForceFeed

EXLS / HXLS

Fraises grande-avance miniatures, pour une plus grande productivité dans les opérations d’ébauche

ø8 – ø25 mm – (APMX): 0.5 mm

DoTwistBall

EXLN / HXLN / TXLN

Unique insert design to ensure high stability for incredible productivity

ø20 – ø63 mm – (APMX): 2 mm

MillQuadFeed

HXSW / TXSW / EXSW

A new generation of high-feed milling cutter with high versatility

ø25 – ø160 mm – (APMX): 2.5 mm

DoFeedQuad

TXQ

Fraise à surfacer à très grande avance avec 8 plaquettes de coupe

ø50 – ø125 mm – (APMX): 2.0 mm

Surfaçage

TungEight-Mill

TAOW

Plaquettes économiques à 8 arêtes de coupe pour des surfaçages sans effort

ø50 – ø160 mm – (APMX): 3 mm

CeramicSpeed-Mill

TFMRN

Fraise à haut rendement avec plaquettes en céramique pour l’usinage d’alliages à haute température

ø50.35 – ø67.37 mm – (APMX): 2 mm

TungSpeed-Mill (TPYD06, EPYD06)

TPYD / EPYD

Fraise à surfacer à grande vitesse pour la finition de l’aluminium

ø40 – ø160 mm – (APMX): 4.5 mm

TungSpeed-Mill (TPYP, EPYP)

TPYP / EPYP

High speed face milling cutter for finishing aluminum

ø25 – ø125 mm – (APMX): 4 mm

DoQuad-Mill

THSN

Face Milling Cutter with 8 Cutting Edge Insert for Ultimate Clearance

ø50 – ø100 mm – (APMX): 9.5 mm

DoTriple-Mill

TASN

Highly-versatile face milling cutters for a wide variety of materials

ø50 – ø160 mm – (APMX): 6 mm

DoOcto

TAN

Idéal pour le surfaçage en acier et en fonte

ø63 – 315 mm (AMMX): 7.5 mm

DoPent

EEN / TEN

High-speed face milling with superior surface finish

ø32 – ø315 mm – (APMX): 6.4 mm

TungMill (TFE12, EFE12)

TFE / EFE

Solution for non-ferrous material machining

ø50 – ø125 mm – (APMX): 8 mm

NMS

NMS / EMS

Easy-to-index milling cutters for superior surface quality

ø80 – 200 mm (APMX): 0.2 mm

TAW / EAW

TAW / EAW

The best solution for steel and cast iron milling

ø25 – 200 mm (APMX): 5mm

Fraisage à 90°

ExtendedForce-Mill

LPSX

Indexable extended-flute cutters for high-efficiency rough milling operations of titanium alloy and cast iron parts

ø50 – ø66 mm – (APMX): 54 / 76.5 mm

DoForce-Tri

EPTN / TPTN

Highly productive and cost-effective shoulder milling cutter

ø18 – ø160 mm – (APMX): 11 mm

Tung-Tri

EPA / HPA / TLA

Shoulder milling cutter with cost-efficient inserts and outstanding chatter stability

ø8 – ø160 mm – (APMX): 3.5 / 6 / 10 / 15 mm

TungTri-Shred

EPTC / TPTC / LPTC

Fraise d’ébauche hautement productive avec bords dentelés

ø50 – ø100 mm – (APMX): 76 mm

TungForce-Rec

EPAV / HPAV

Versatile shoulder milling cutter with unique V-shaped insert bottom for maximum productivity

ø6 – ø63 mm – (APMX): 11.5 mm

TungRec

EPO / ELS / HPO / TPO / TLS

Excellent surface finish and wall accuracy in shoulder milling

ø12–160 mm – (APMX): 16.7 mm

TungQuad

EASD / ELD / EPD / TPD

Outil idéal pour le fraisage de petites pièces sur de petites machines

ø12 – ø40 mm – (APMX): 4 mm

DoRec

EPQ / TPQ

Shoulder milling cutter with strong and smooth cutting edges

ø25 – ø160 mm – (APMX): 16 mm

TecMill

TGM / EPM / TLM

Fraise à épaulement pour l’ébauche sur des machines de taille moyenne à grande

ø32 – ø250 mm – (APMX): 15.1 mm

TungAluMill

EPXV / TPXV / HPXV

Shoulder mill that enables high speed machining of aluminum and non-ferrous materials

ø25 – ø125 mm – (APMX): 13 – 16 mm

TPW / EPW

TPW / EPW

The best solution for steel and cast iron milling

ø32 – 200 mm (APMX): 10mm

Rainurage

SlotMill Series

S/ASG, A/H/TSV, A/H/TSW, A/TSN

Slot milling cutter series for stable operation with excellent chip control

ø63 – ø250 mm – (APMX): 14 – 82 mm

Copiage

FixRMill (new design)

ERRQ / TRRQ / HRRQ

Radius cutter for profile milling of complex parts

ø40 – 80 mm – (APMX): 5/6/8 mm

AddForceBarrel

HFZN

Barrel-shaped inserts for profile milling with productivity boost

ø16 – ø40 mm

BallRoughNose

EBRM / HBRM

Indexable ball endmills for rough profiling

ø16 – ø25 mm – (APMX): 17.7 mm

DoTwistBall

EXLN / HXLN / TXLN

Radius cutter for 3-dimensional machining due to helical cutting edges

ø20 – ø63 mm – (APMX): 2 mm

BallFinishNose

EBFM / HBFM

Fraise à queue indexable de haute précision pour les applications de finition

ø8 – ø32 mm – (APMX): 1.28 mm

DoMini-Mill

HFWX

Profile milling cutter for semi-finishing to finishing with double-sided positive insert

ø16 – ø25 mm – (APMX): 1 mm

FixRMill

ERP / HRP / TRP

The most suitable for Radius cutter for profile milling of complex parts and non-ferrous material machining

ø20 – 66 mm – (APMX): 8 mm

Filetage à la fraise

ThreadMilling

ETTL / MTEC

Various type of tools for thread milling

ø0.72– ø80 mm – (APMX): 58.5 mm

Others

TCB

TCB

Multifunctional counterboring tool with enriched tool diameter line up

ø10 – ø59 mm – (APMX): 10 mm

Fraises en bout

DoMultiRec

EVLX / HVLX

Multifunctional milling cutter with center cutting edge

ø12 – ø40 mm – (APMX): 18 mm

TungMeister

VSS / VTS / VSC / VST / VAD / VER

Fraise à embout avec tête interchangeable pour un temps de changement d’outil réduit

ø5 – ø32 mm – (APMX): 38 mm

SolidMeister

TEB / TEC / TECA / TECH / TECK / TECR

raise à embout puissante avec d’excellentes performances

ø0.4 – ø25 mm – (APMX): 92 mm

Industries

Industries
Tungaloy’s tooling solutions for a wide variety of components

Learn more

e-Catalog

e-Catalog
Download CAD drawings and 3D models