Medical – Kunstmatig heupgewricht en botschroef

Kunstmatig heupgewricht en botschroef

Kunstmatige heupgewrichten bestaan over het algemeen uit vier onafhankelijke delen: steel, kogel, kom (of beker) en een voering van ultrahoogmoleculair polyethyleen die in de kom past. Als gewrichtsprothese moeten de materialen een hoge sterkte, betrouwbare chemische stabiliteit en veiligheid, lage wrijving maar hoge slijtvastheid en uitstekende biocompatibiliteit hebben; daarom worden moeilijke materialen zoals medisch en chirurgisch roestvrij staal, titanium of kobaltchroom veel gebruikt.

Tungaloy presenteert een breed scala aan unieke gereedschappen en optimale technische oplossingen voor CNC-bewerkingscentra en Zwitserse machines om moeilijke materialen die in de medische industrie worden gebruikt, effectief en concurrerend te bewerken.

De kom

Algemene uitdagingen

  • Om de bewerkingsefficiëntie te verhogen:
  • Om het proces te beveiligen op basis van een langere standtijd en voorspelbaarheid van slijtage
  • Om trillingen te minimaliseren met behulp van lange uitsteeklengtes en uitdagende onderdeelbevestigingen voor een hoogwaardige oppervlakteafwerking

Belangrijkste punten

1.Proceszekerheid op basis van betere voorspelbaarheid van slijtage en standtijd

De AH8000-kwaliteitsserie bestaat uit hardmetaalsoorten met een PVD-coating en een AlTiN-nano-meerlaagse coating met een hoog aluminiumgehalte, speciaal ontwikkeld voor het bewerken van exotische onderdelen.

  • AH8015 is de eerste keus kwaliteit die een goede combinatie biedt van slijtvastheid en breuktaaiheid
  • AH8005 biedt superieure slijtvastheid tijdens het bewerken van exotische materialen bij verhoogde snijsnelheden met een uitstekende weerstand tegen snijkantopbouw

Het gebruik van deze hardmetaalwisselplaten in combinatie met een goed doorstroomkoelmiddeltoevoersysteem zoals TungTurn-Jet of StreamJet-Bar kan de proceszekerheid verhogen door een langere standtijd en een betere voorspelling van slijtage.

meer informatie

2.Verhoogde gereedschapsbetrouwbaarheid, kwaliteit van de oppervlakteafwerking en kostenefficiëntie

MiniForce-Turn is voorzien van een kostenefficiënte dubbelzijdige positieve wisselplaat met een uniek zwaluwstaartprofiel dat stevig in het bijpassende profiel van de wisselplaatzitting past voor maximale wisselplaatbetrouwbaarheid en proceszekerheid.
De MiniForce-Turn wisselplaat is ontworpen om gedurende een langere periode een scherpe snijkant te behouden en genereert een lage snijkracht en een uitstekende oppervlaktekwaliteit, terwijl de dubbelzijdige functie een groter aantal bruikbare snijkanten per wisselplaat biedt voor een betere wisselplaateconomie.

meer informatie

Machining Solutions

Draaien

TungTurn-Jet system
  • Serie gereedschaphouders met doorlopende koelvloeistof en nauwkeurig koelmiddelafgiftesysteem
  • Levert twee stromen koelvloeistofstralen door de houder precies in de optimale posities – dicht bij het snijpunt
  • Verbeterde spaanbeheersing door de spaan weg te tillen van het spaanvlak en de warmtebelasting te verminderen. Langere standtijd en drastisch verhoogde toe te passen snijparameters
  • Verbeterde wisselplaatprestaties en stukkwaliteit, evenals preventie van snijkantvorming die typisch is bij het bewerken van exotische werkstukken, voor een langere standtijd en betere voorspelling van slijtage

meer informatie

MiniForce-Turn
  • Voordelige dubbelzijdige positieve wisselplaat
  • Uiterst stijve wisselplaatklemming, mogelijk gemaakt door een uniek zwaluwstaartvormig in elkaar grijpend ontwerp, biedt proceszekerheid voor het bewerken van kleine onderdelen
  • Lichte snijgeometrie voor lage snijkracht en hoogwaardige oppervlakteafwerking

meer informatie

StreamJet-Bar
  • ID-draaihouders met minimale gereedschapsdoorbuiging
  • Doorlopend koelmiddel en optimaal spaanzakontwerp voor effectieve spaanafvoer
  • Voor kleine boringen zo klein als ø4,5 mm (ø.177″)
  • Wisselplaten met 00 en 01 neusradius zijn ook verkrijgbaar

meer informatie

Gaten maken

GigaMiniDrill
  • VHM boorlijn met extra kleine diameter in een diameterbereik van 0,1 tot 3,0 mm (.004″ tot .118″)
  • Verkrijgbaar in stappen van 0,01 mm

Groef / Afsteken

TungCut
  • Zeer stijf wisselplaatklemontwerp voor extra stabiliteit en nauwkeurigheid
  • Hogedruk doorkoelsysteem voor effectieve spaanbeheersing en proceszekerheid
  • Wisselplaten zijn verkrijgbaar in verschillende geometrieën en hardmetaalsoorten voor zeer efficiënte bewerking

meer informatie

De Steel

General Challenges

  • To increase machining efficiency
  • To secure process based on increase tool life and wear predictability
  • To improve surface finish quality
  • To minimize cutting forces for reduced vibration due to challenging workpiece shape and workpiece fixture
  • To maintain close tolerances of holes and part sizes

Key Points

  • Improved surface quality

TungMeister exchangeable-head end mill system offers more than 13,000 possible head-shank combinations, enabling quick, easy, and accurate tool changes between various applications.

  • VFM style milling head is developed for efficient face milling of small parts, featuring six cutting edges with built-in wiper that provides excellent surface finish at elevated feeds. When combined with highly rigid VSSD toolholder, VFM minimizes vibration for excellent surface finish and process security.

more info

SolidMeister solid carbide end mill series offers a wide variety of sizes and geometries with sophisticated features.

  • FeedMeister has a large radius cutting edge configuration that enables highly stable milling at greatly increased feed rates – even with long overhang. This 4 flute tool design exhibits excellent performance on stainless steel, titanium and nickel based alloys.
  • VariableMeister consists of variable-pitch, variable-helix design. Reduced vibrations for high quality surface finish and process security.
  • FinishMeister boasts a sophisticated configuration that allows roughing and finishing operations at the same time, allowing the ability to apply roughing machining conditions, while providing excellent surface finish.
  • FinishMeister VARIABLE PITCH, a new generation of solid carbide end mill, integrates the remarkable advantage of FinishMeister with a variable pitch design — a “2-in-1” version of FinishMeister. The tool dramatically increases productivity, while reducing production cost and inventory.

more info

Machining Solutions

Milling

TungForce-Feed
  • Small-diameter indexable end mill for high feed milling application
  • Two types of inserts are interchangeable: radius or high feed

more info

TungForce-Rec
  • Strong inserts and high density cutter body design provide process security
  • High precision inserts and their sophisticated orientations provide high wall accuracy equal to solid endmills

more info

Hole Making and Threading

DrillMeister
  • Exchangeable-tip drill tool series that offers variable drill tip shapes, geometries, and sizes in grades that works in all material groups including difficult materials
  • DMF-style flat-edge drill tip streamlines counterboring process with a flat hole bottom
  • No setup time
  • Reduced inventory and production cost

more info

GigaJet-Drill (standard/special solid drills)
  • Fine tuning of drill tip profiles is possible for high precision hole making
SolidThread – ThreadMilling tool series
  • Thread milling tool series is available in solid, exchangeable head, and indexable insert styles
  • Allows full threads close to the bottom of the hole
  • Generates very small, manageable chips
  • Adjustments for tolerance and wear can be done easily
  • Broken tool can easily be changed

more info

The Bone Screw

Bone screws are one of the most ubiquitous orthopedic implants. Most bone screws are made of stainless steel or titanium alloys due to stringent requirements for good mechanical strength and biocompatibility and come in various sizes with different thread designs, thread pitches, and thread lengths.

Despite its seemingly simple structure, bone screws have a surprising amount of complexity in its design. To meet this challenge, precision CNC Swiss-style machining is the method often used to accomplish the designs that give bone screws the proper features and functionality for their end uses.

General Challenges

  • To increase process security
  • To increase tool life in difficult materials
  • To achieve high part tolerances and precisions
  • To provide full line tool solution to Swiss machine applications
  • To maximize machine uptime

Key Points

  • Process security through insert reliability and machining stability

SH725, a PVD-coated carbide grade, is developed specifically for Swiss-type machining methods. Improved coating-substrate adhesion and hard coating layer provide the insert with excellent wear resistance and edge line security.

more info

TungTurn-Jet toolholder system with precision through-coolant delivery capability enables coolant supply close to the cutting point, providing better chip control and longer tool life during the machining of difficult materials, while also allowing the application of significantly increased cutting parameters.

more info

MiniForce-Turn features double-sided positive insert with sharp cutting edges. AH725 grade enhances the insert’s edge-line security and wear resistance, generating light cutting with long tool life. Tool stability ensured by innovative dovetail interlocking provides this challenging machining with process security, as well as cost efficiency.

more info

Machining Solutions

OD Turning

J-Series
  • Extensive turning tool series for Swiss machines
  • Allows flexible tooling to address various profile turning needs

more info

AH8000 series
  • PVD-coated carbide grade series featuring AlTiN nano-multilayer coating with high aluminum content developed specifically for machining difficult parts:
    • AH8015 is the first-choice grade that provides a good combination of wear resistance and fracture toughness
    • AH8005 boasts superior wear resistance during machining of exotic materials at elevated cutting speeds, while also providing an excellent resistance to built-up edge

more info

Thread Turning

TetraForce-Cut (with special insert)
  • Rigid and secure insert holding provides tool reliability
  • Cost efficient four-edged insert for grooving, parting, or threading works
  • Unused cutting edges are protected during machining, assuring all four edges to be used to their full capacities
  • Customized inserts tailored for various groove/thread profile needs are also available

more info

Parting

DuoJust-Cut
  • Rigid insert clamping for increased tool reliability
  • Dual-rake insert enables effective chip control and evacuation
  • Available with a variety of cutting edge geometries

more info

Pocket Milling (for Self-Tapping Flutes)

TungMeister
  • Offers extensive range of end milling head profiles
  • Excellent repeatability for high part precision

more info

SolidMeister
  • Solid carbide end mill series available in various sizes, profiles, geometries, and grades for various applications

more info

TungForce-Rec
  • Strong inserts and high density cutter body design provide process security
  • High precision inserts and their innovative orientations provide high wall accuracy equal to solid endmills
  • The insert has sharp cutting corners for precision

more info

GigaMini-Drill (standard/special solid drills)
  • Fine tuning of drill tip profiles is possible for high precision hole making
Solid Broaching Tool (special)
  • Special customized tools tailored for your specific needs
Industries

Industries

Industries
Tungaloy’s tooling solutions for a wide variety of components

Learn more

e-Catalog

e-Catalog

e-Catalog
Download CAD drawings and 3D models

Learn more

Bronnen
Onze nieuwsbrief ontvangen?