Solid4FlutesDrill

h_549_t_01

Solid carbide drills with 4 effective cutting edges for superior productivity

Four effective cutting edges for high drilling productivity

Applications & Features

Drilling

1. Optimized drill edge geometry allows smooth drill entry and stable drilling operations

2. Double feed of conventional two-flute drills

3. Four margins and a self-centering drill geometry enables high hole precision and quality

Drill bodies & Grades

Drill bodies

DSQ-E3/5

  • Without coolant hole type
Main Grades

AH9130

  • P15 – P35 / M25 – M35 / K10 – K25 / S15 – S30
  • High wear resistance
  • Designed for drilling various materials

Standard cutting conditions

ISO Workpiece material Brinell hardness

(HB)

Cutting speed

Vc (m/min)

Feed: f (mm/rev)
ø6 – ø9.9 ø10 – ø16
Grey cast irons
FC300, etc.
250, etc.
– 200 60 – 120 0.2 – 0.8 0.3 -1.0
Ductile cast irons
FCD450, etc.
450-10S, etc.
– 300 60 – 120 0.2 – 0.8 0.3 -1.0
  • The cutting parameters shown in the table are a starting guideline.
    Values should be varied depending on the power or rigidity of the machine.
    Optimum conditions should be selected depending on the actual chip control or damage on edges.
  • When using the smaller diameter tools in each range, set the feed “f” to the lower values.
  • When drilling with a depth deeper than L/D = 3, a pecking cycle or dwell operation should be considered depending on the actual chip control.

For more information about this product, visit our online e-catalog or download the product
report:

Online-shop

Online-shop

Online-shop
Bestel en vind alles in de online-shop

Kom meer te weten

e-Catalog

Elektronische catalogus

Elektronische catalogus
Download CAD tekeningen en 3d modelen

Kom meer te weten

Bronnen
Onze nieuwsbrief ontvangen?