DuoJust-Cut

Applications & Fonctionnalités

Plaquettes & Nuances

Porte-outils

Exemples pratiques

Exemple #1

Partie:	Partie électrique
Matériau:	SUM23
Poret-outils:	JSXXR1212X09
Plaquette:	JXPS12R08F
Nuance:	SH725
Conditions de coupe:	Vc = 110 (m/min) f = 0.03 (mm/rev) CW = 0.8 (mm) Application: séparation Liquide de refroidissement : avec

Exemple #2

Partie:	Bobine
Matériau:	A6061
Porte-outils:	JSXXR1212X09
Plaquette:	JXDX12R20F
Nuance:	DX110
Conditions de coupe:	Vc = 300 (m/min) f = 0.05 (mm/rev) CW = 5 (mm) Application: rainurage, tournage (en une seule passe) Liquide de refroidissement : avec

Exemple #3

Partie:	Composant hydraulique
Matériau:	SUS304 / X5CrNi18-9
Porte-outil:	JSXXL1212X09-S
Plaquette:	JXPG16L20F
Nuance:	SH725
Conditions de coupe:	Vc = 75 (m/min) f = 0.02 (mm/rev) CW = 2.0 (mm) Application: séparation Liquide de refroidissement : avec

Conditions de coupe recommandées

Parting, Grooving

ISO	Workpiece materials	Grades	Cutting speed Vc (m/min)	Feed f (mm/rev)
	Low carbon steels S15C, SS400, etc. C15E4, E275A, etc.	SH725 SH7025	50 – 200	0.01 – 0.05
	Carbon steels, Alloy steels S55C, SCM440, etc. C55, 42CrMo4, etc.	SH725 SH7025	50 – 200	0.01 – 0.05
	Free cutting steels SUH22, SUH23, etc.	SH725 SH7025	50 – 200	0.01 – 0.05
	Stainless steels SUS304, X5CrNi18-9, etc.	SH725 SH7025	50 – 200	0.01 – 0.05
	Aluminium alloys A5056, A6061, etc.	SH725 SH7025	150 – 200	0.01 – 0.05
	Copper alloys C2600, C280C, etc.	SH725 SH7025	100 – 200	0.01 – 0.05
	Titanium alloys Ti-6AI-4V, etc.	SH725 SH7025	30 – 80	0.01 – 0.05
	Superalloys Inconel718, etc.	SH725 SH7025	30 – 80	0.01 – 0.05

JXBM12R

ISO	Workpiece materials	Grades	Cutting speed Vc (m/min)	Feed f (mm/rev)
	Low carbon steels S15C, SS400, etc. C15E4, E275A, etc.	SH7025	50 – 150	0.02 – 0.15
	Carbon steels, Alloy steels S55C, SCM440, etc. C55, 42CrMo4, etc.	SH7025	50 – 150	0.02 – 0.15
	Free cutting steels SUH22, SUH23, etc.	SH7025	50 – 150	0.02 – 0.15
	Stainless steels SUS304, X5CrNi18-9, etc.	SH7025	30 – 120	0.02 – 0.12
	Aluminium alloys A5056, A6061, etc.	SH7025	100 – 150	0.02 – 0.15
	Copper alloys C2600, C280C, etc.	SH7025	100 – 150	0.02 – 0.15
	Titanium alloys Ti-6AI-4V, etc.	SH7025	30 – 80	0.01 – 0.05
	Superalloys Inconel718, etc.	SH7025	30 – 80	0.01 – 0.05

For aluminium and non-ferrous metal PCD insert

ISO	Workpiece materials	Grades	Operation	Cutting speed Vc (m/min)	Feed f (mm/rev)	Depth of cut ap (mm)
	Aluminium alloys A5056, A6061, etc.	DX110	Grooving	100 – 300	0.03 – 0.15	–
		DX110	Turning	100 – 300	0.03 – 0.15	< 6

Threading

ISO	Workpiece materials	Grades	Cutting speed Vc (m/min)
	Low carbon steels S15C, SS400, etc. C15E4, E275A, etc.	SH725 SH7025	50 – 200
	Carbon steels, Alloy steels S55C, SCM440, etc. C55, 42CrMo4, etc.	SH725 SH7025	50 – 200
	Free cutting steels SUH22, SUH23, etc.	SH725 SH7025	50 – 200
	Stainless steels SUS304, X5CrNi18-9, etc.	SH725 SH7025	50 – 200
	Aluminium alloys A5056, A6061, etc.	SH725 SH7025	150 – 200
	Copper alloy C2600, C280C, etc.	SH725 SH7025	100 – 200
	Titanium alloys Ti-6AI-4V, etc.	SH725 SH7025	30 – 80
	Superalloys Inconel718, etc.	SH725 SH7025	30 – 80