WPML

ISO-insert

Application:
DLC-coated grade for non-ferrous metal ISO turning (e.g., external turning).

Features:

Excellent built-up edge (BUE) / adhesion resistance, delivering a bright, high-quality surface finish.
High hardness and heat resistance help suppress wear progression for stable, long tool life.
Strong coating adhesion supports reliable and stable machining.
Non-ferrous chipbreaker lineup: AL (positive) / 28 (negative) for improved chip control and reduced chip entanglement.

👉 Best suited when you want stable surface finish and longer tool life in non-ferrous turning, especially where adhesion/BUE is a concern.

TungThread

Application:
DLC-coated grade for non-ferrous threading (external/internal), partial-profile type.

Features:

Enables high thread surface quality while significantly reducing adhesion/BUE on rake and flank faces, helping slow wear.
Ground, high-precision inserts for consistent thread quality.
60° / 55° partial-profile supports both external and internal threads; applicable to ISO metric (M), UN, W, and G threads.

👉 Best suited when you want stable thread quality in non-ferrous materials, minimizing adhesion, surface issues, and rapid wear

TungForce-Rec

Application:
90° square shoulder milling cutter for stable, high-efficiency milling.

Features:

Unique V-bottom insert and clamping mechanism for stable machining.
High-rigidity body design and secure insert clamping help prevent insert movement.
Designed to deliver stable performance even in small-diameter applications.

👉 Best when you want reliable, high-productivity square shoulder milling with strong process stability.

Tung-Tri

Application:
Square shoulder milling cutter focused on economy and chatter stability.

Features:

Economical 3 cutting-edge insert with large rake angle reduces cutting force and improves chip formation.
Optimized insert flank face and differential pitch on the cutter help suppress chatter.
Large rake/inclination angles support smooth cutting while maintaining edge strength.

👉 Best when you want cost-efficient, stable shoulder milling with good cutting action.

TungAluMill

Application:
High-speed shoulder milling for aluminum and non-ferrous materials.

Features:

Secure, stable insert clamping design with a unique V-shaped bottom for high-speed machining.
Cutting edge geometry optimized for aluminum machining.
Applicable to a wide range of operations (e.g., pocketing/slotting and helical ramping).

👉 Best when you want stable high-speed Al/non-ferrous milling with broad application coverage.

DoMultiRec

Application:
Multifunctional milling cutter with center-cutting capability (incl. drilling).

Features:

Center cutting capability enables multiple operations with a single tool, including drilling.
Insert integrates a center and peripheral cutting edge on one side.
Double-sided insert allows up to four indexings (front/back; center/periphery positions).

👉 Best when you want to reduce tool changes and maximize versatility with one cutter.

TFE / EFE (TungMill / TFE12, EFE12)

Application:
High-precision face milling focused on surface finish and accuracy.

Features:

Lightweight facemill body design for high-precision machining.
Adjustable pockets for extra precision on surface finish.
Insert pitch (density) variations to select the best balance of economy and productivity.

👉 Best for precision face milling where controlled surface finish is critical.

DoPent

Application:
High-speed face milling with superior surface finish (all materials).

Features:

Economical double-sided pentagonal insert with 10 cutting edges.
Low cutting force concept supports stable machining.
Especially suitable for thin or low-rigidity workpieces thanks to reduced cutting/radial forces.

👉 Best when you want low cost per edge + stable, high-speed face milling with good finish.

TungMill

Application:
Milling solution for steel and cast iron (face/shoulder/chamfering).

Features:

Simulation-based design provides a lightweight cutter with low cutting load while maintaining rigidity.
TPW/EPW type features a 4-corner insert design balancing sharpness and edge strength.
45° and 90° cutting edge angle supports square shoulder milling and face milling around obstacles/fixtures.

👉 Best for steel/cast-iron milling where you want accuracy, efficiency, and stable cutting behavior.

Feature 1: Achieving High-Quality Machined Surfaces through Excellent Anti-Adhesion Performance

Newly developed DLC coating significantly suppresses adhesion with aluminum and non-ferrous metals
Prevents built-up edge formation, delivering glossy and highly precise surface finishes
Stable surface quality reduces the need for secondary finishing operations

Feature 2: Extended Tool Life through High Hardness and Heat Resistance

High hardness of the DLC film minimizes edge wear progression
Excellent heat resistance ensures stable performance even in high-speed and high-efficiency machining
Reduces tool change frequency and contributes to overall cost reduction

Feature 3: Stable Performance for a Wide Range of Machining Applications

Strong coating adhesion provides stable cutting performance across various operations such as turning, threading, and milling
DS2005 grade enhances wear resistance for high-speed machining, achieving longer tool life
DS2015 grade offers an excellent balance of wear and chipping resistance, enabling stable machining under a wide range of conditions