Szukaj

SpinJet

Strona główna / Produkty / Obróbka / SpinJet
Tungaloy spinJet tooling

Coolant-driven high speed compact spindle

Productivity quadruples due to spindles that rotate at high speed with coolant pressure

Features

1. Coolant-driven HSM spindle for high productivity with small diameter tools on limited RPM machines

• SpinJet utilizes the machine tool’s existing coolant supply, driven by a high pressure pump as an energy source to rotate a turbine at high speeds.
• Strong coolant jet flow provide extended tool life and machining stability.

 

2. Energy saving

• Tools rotate only with coolant pressure, and the machine spindle is idle while SpinJet is in operation.
Note: The main machine spindle should be stationary while the SpinJet spindle is mounted on the machine.

3. Wireless RPM monitoring system

• SpinJet is equipped with an online speed display system, monitoring the actual cutting tool rotation speed during machining.

Holders & Accessories

Holders

SpinJet holders

Accessories

SpinJet Accessories

Practical examples

Example #1

General Engineering

Part: Machine parts
Material: SUS303 / X10CrNiS18-9 (25HRC)
Holder: TJSGJETST20
Endmill: TEB010A2-015/12C4M45 (ø1.0, z = 2)
Grade: AH750
Cutting conditions: Vc = 120 (m/min)
n = 45,600 (RPM)
fz = 0.016 (mm/t)
ap = 0.01 (mm)
ae = 1 (mm)
Application: Grooving
Coolant: Wet
Machine: Vertical M/C, BT30
Example #2

Die and Mold Industry

Part: Electrode
Material: C1100
Holder: TJSGJETST20
Endmill: TEB010A2-015/12C4M45 (ø1.0, z = 2)
Grade: AH750
Cutting conditions: Vc = 95 (m/min)
n = 40,000 (RPM)
fz = 0.025 (mm/t)
ap = 0.04 (mm)
ae = 0.04 (mm)
Application: Profiling
Coolant: Wet
Machine: Vertical M/C, BT30
Example #3

Medical Industry

Part: Medical equipment
Material: Titanium alloys
Holder: TJSGJETER32
Endmill: TEB010A2-015/12C4M45 (ø1.0, z = 2)
Grade: AH750
Cutting conditions: Vc = 80 (m/min)
n = 35,000 (RPM)
fz = 0.03 (mm/t)
ap = 0.03 (mm)
ae = 0.05 (mm)
Application: Profiling
Coolant: Wet
Machine: Vertical M/C, BT30

Standard cutting conditions

TJS M00
ISO Workpiece material Tool Application Tool diameter
DC (mm)		 Coolant pressure
(MPa)		 Spindle speed
n (min-1)		 Width of cut
ae (mm)		 Depth of cut
ap (mm)		 Feed per tooth
fz (mm/t)
Alloy steel
35 HRC		 Drill Drilling 0.5 1.5 18,000 – – 0.007
2 23,000 – – 0.01
3 31,000 – – 0.01
4 40,000 – – 0.01
1 1.5 18,000 – – 0.01
2 23,000 – – 0.01
3 31,000 – – 0.01
4 40,000 – – 0.01
2 1.5 18,000 – – 0.01
2 23,000 – – 0.01
3 31,000 – – 0.01
4 40,000 – – 0.01
Ball type
endmill		 Profiling 1 1.5 18,000 – 0.05 0.003
2 23,000 – 0.05 0.003
3 31,000 – 0.05 0.003
4 40,000 – 0.05 0.003
2 1.5 18,000 – 0.08 0.004
2 23,000 – 0.08 0.004
3 31,000 – 0.08 0.004
4 40,000 – 0.08 0.004
3 1.5 18,000 – 0.1 0.006
2 23,000 – 0.1 0.006
3 31,000 – 0.1 0.006
4 40,000 – 0.1 0.006
Endmill Slotting 1 1.5 18,000 1 0.1 0.006
2 23,000 1 0.1 0.006
3 31,000 1 0.1 0.006
4 40,000 1 0.15 0.006
2 1.5 18,000 2 0.12 0.01
2 23,000 2 0.12 0.01
3 31,000 2 0.14 0.01
4 40,000 2 0.14 0.01
3 1.5 18,000 3 0.12 0.01
2 23,000 3 0.12 0.01
3 31,000 3 0.12 0.01
4 40,000 3 0.15 0.01
Shouldering 2 1.5 18,000 0.5 0.5 0.002
2 23,000 0.5 0.5 0.014
3 31,000 0.5 0.5 0.017
4 40,000 0.5 0.5 0.018
Stainless steel
180 – 250 HB		 Drill Drilling 0.5 1.5 18,000 – – 0.015
2 23,000 – – 0.015
3 31,000 – – 0.015
4 40,000 – – 0.015
1 1.5 18,000 – – 0.015
2 23,000 – – 0.015
3 31,000 – – 0.015
4 40,000 – – 0.015
2 1.5 18,000 – – 0.015
2 23,000 – – 0.015
3 31,000 – – 0.015
4 40,000 – – 0.015
Endmill Slotting 1 1.5 18,000 1 0.1 0.015
2 23,000 1 0.1 0.015
3 31,000 1 0.15 0.015
4 40,000 1 0.15 0.015
2 1.5 18,000 2 0.15 0.015
2 23,000 2 0.15 0.015
3 31,000 2 0.15 0.015
4 40,000 2 0.2 0.015
Shouldering 2 1.5 18,000 0.35 0.15 0.02
2 23,000 0.35 0.15 0.02
3 31,000 0.4 0.15 0.02
4 40,000 0.5 0.18 0.025
Aluminium alloy
80 – 160 HB		 Drill Drilling 0.5 1.5 18,000 – – 0.01
2 23,000 – – 0.01
3 31,000 – – 0.01
4 40,000 – – 0.01
1 1.5 18,000 – – 0.01
2 23,000 – – 0.01
3 31,000 – – 0.01
4 40,000 – – 0.01
2 1.5 18,000 – – 0.015
2 23,000 – – 0.015
3 31,000 – – 0.017
4 40,000 – – 0.018
Ball type
endmill		 Profiling 1 1.5 18,000 – 0.05 0.003
2 23,000 – 0.05 0.003
3 31,000 – 0.05 0.003
4 40,000 – 0.13 0.003
2 1.5 18,000 – 0.08 0.004
2 23,000 – 0.08 0.004
3 31,000 – 0.08 0.004
4 40,000 – 0.15 0.004
3 1.5 18,000 – 0.08 0.006
2 23,000 – 0.09 0.006
3 31,000 – 0.09 0.006
4 40,000 – 0.15 0.006
Endmill Slotting 1 1.5 18,000 1 0.1 0.025
2 23,000 1 0.1 0.025
3 31,000 1 0.15 0.025
4 40,000 1 0.15 0.025
2 1.5 18,000 2 0.2 0.025
2 23,000 2 0.2 0.025
3 31,000 2 0.2 0.025
4 40,000 2 0.2 0.025
Shouldering 2 1.5 18,000 0.5 0.25 0.02
2 23,000 0.5 0.25 0.02
3 31,000 0.5 0.5 0.02
4 40,000 0.5 0.5 0.025
TJS M90
ISO Workpiece material Tool Application Tool diameter
DC (mm)		 Coolant pressure
(MPa)		 Spindle speed
n (min-1)		 Width of cut
ae (mm)		 Depth of cut
ap (mm)		 Feed per tooth
fz (mm/t)
Pre-hardened steel
35 HRC		 Drill Drilling 0.5 2 35,000 – – 0.01
3 44,000 – – 0.01
4 53,000 – – 0.01
1 2 35,000 – – 0.01
3 44,000 – – 0.01
4 53,000 – – 0.01
2 2 35,000 – – 0.01
3 44,000 – – 0.01
4 53,000 – – 0.01
Ball type
endmill		 Profiling 1 2 35,000 – 0.05 0.003
3 44,000 – 0.05 0.003
4 53,000 – 0.05 0.003
2 2 35,000 – 0.08 0.004
3 44,000 – 0.08 0.004
4 53,000 – 0.08 0.004
3 2 35,000 – 0.1 0.006
3 44,000 – 0.1 0.006
4 53,000 – 0.1 0.006
Endmill Slotting 0.5 2 35,000 0.5 0.05 0.006
3 44,000 0.5 0.05 0.006
4 53,000 0.5 0.05 0.006
1 2 35,000 1 0.1 0.006
3 44,000 1 0.1 0.006
4 53,000 1 0.15 0.006
2 2 35,000 2 0.12 0.01
3 44,000 2 0.14 0.01
4 53,000 2 0.14 0.01
3 2 35,000 3 0.12 0.01
3 44,000 3 0.12 0.01
4 53,000 3 0.15 0.01
Shouldering 2 2 35,000 0.5 0.5 0.001
3 44,000 0.5 0.5 0.017
4 53,000 0.5 0.5 0.018
Stainless steel
SUS316
35 HRC		 Drill Drilling 0.5 2 35,000 – – 0.015
3 44,000 – – 0.015
4 53,000 – – 0.015
1 2 35,000 – – 0.015
3 44,000 – – 0.015
4 53,000 – – 0.015
2 2 35,000 – – 0.015
3 44,000 – – 0.015
4 53,000 – – 0.015
Endmill Slotting 1 2 35,000 1 0.1 0.015
3 44,000 1 0.15 0.015
4 53,000 1 0.15 0.015
2 2 35,000 2 0.15 0.015
3 44,000 2 0.15 0.015
4 53,000 2 0.2 0.015
Shouldering 2 2 35,000 0.35 0.15 0.02
3 44,000 0.4 0.15 0.02
4 53,000 0.5 0.18 0.025
Aluminium alloy
ADC12
28 HRC		 Drill Drilling 0.5 2 35,000 – – 0.01
3 44,000 – – 0.01
4 53,000 – – 0.01
1 2 35,000 – – 0.01
3 44,000 – – 0.01
4 53,000 – – 0.01
2 2 35,000 – – 0.015
3 44,000 – – 0.017
4 53,000 – – 0.018
Ball type
endmill		 Profiling 1 2 35,000 – 0.05 0.003
3 44,000 – 0.05 0.003
4 53,000 – 0.13 0.003
2 2 35,000 – 0.08 0.004
3 44,000 – 0.08 0.004
4 53,000 – 0.15 0.004
3 2 35,000 – 0.08 0.006
3 44,000 – 0.09 0.006
4 53,000 – 0.15 0.006
Endmill Slotting 0.5 2 35,000 0.5 0.1 0.02
3 44,000 0.5 0.12 0.02
4 53,000 0.5 0.15 0.02
1 2 35,000 1 0.1 0.025
3 44,000 1 0.15 0.025
4 53,000 1 0.15 0.025
2 2 35,000 2 0.2 0.025
3 44,000 2 0.2 0.025
4 53,000 2 0.2 0.025
Shouldering 2 2 35,000 0.5 0.25 0.02
3 44,000 0.5 0.5 0.02
4 53,000 0.5 0.5 0.025
Tool steel
SKD61
58 HRC		 Ball type
endmill		 Profiling 1 2 35,000 – 0.05 0.005
3 44,000 – 0.05 0.005
4 53,000 – 0.05 0.005
2 2 35,000 – 0.07 0.006
3 44,000 – 0.08 0.006
4 53,000 – 0.08 0.006
3 2 35,000 – 0.08 0.006
3 44,000 – 0.1 0.006
4 53,000 – 0.1 0.006

For more information about this product, visit our online e-catalog or download the product report:

e-Catalog

Metric  |  Imperial

PDF
Video

How to use Spinjet

Contact Tungaloy relate to SpinJet

If  you need some assistances from Tungaloy, please contact us in the follwoing contact form

Contact form

Sklep online

Sklep on-line

Sklep on-line
Znajdź i zamów narzędzia online

więcej...
e-Katalog

e-Katalog

Katalog elektroniczny
Ściągnij rysunki CAD i modele 3D

więcej...
Aplikacje i przydatne narzędzia