DoFeedTri

m_546_t_01

High feed milling cutters with six cutting edge inserts

Featuring robust cutter design for high productivity

Applications & Features

High feedFace millingSlottingPocketingRampingPlungingHole enlarging

1. Economical double-sided inserts with six cutting edges

– 1.5 to 3 times greater number of cutting edges per insert compared with conventional high feed milling inserts.

– Reduced cost per insert when machining stainless steels and difficult materials, where inserts demonstrate rapid wear.

2. Designed for tool reliability and stability

– Robust cutting edge design forms an obtuse angle, eliminating insert fracture during machining.

– A large contact face on the insert seat provides secure insert retention.

3. Excellent ramping capability

– Longer inner cutting edge allows higher ramp-down capabilities to promote higher productivity.

– Increased max ramping angles allow productivity boosts in linear and helical ramping operations.

Inserts & Grades

Inserts

WXMU03

  • Maximum depth of cut
    – WXMU03: 1 mm
Main Grades

AH3225

  • Good balance between wear and fracture resistance
  • Suitable for steel and stainless steel

AH8015

  • Good balance between wear and fracture resistance
  • First choice for machining heat-resistant alloy under general cutting conditions

Cutter bodies

Shank Type

EXWX03 (ø16 – ø32 mm)

Shank type for high-feed milling

Modular Type

HXWX03 (ø16 – ø32 mm)

Modular head (TungFlex) for high-feed milling

Bore Type

TXWX03 (ø40 – ø50 mm)

Bore head for high-feed milling

Practical examples

Part: Machine structural part
Material: SS400 / E275A
Cutter: EXWX03M020C20.0R03 (ø20 mm, z = 3)
Insert: WXMU0303ZER-MM
Grade: AH3225
Cutting conditions: Vc = 180 (m/min)
fz = 0.9 (mm/t)
ap = 0.5 (mm)
ae = 20 (mm)
Application: Slotting, Shoulder milling
Coolant: Dry
Machine: Vertical M/C, BT40
Part: Heavy equipment part
Material: SM400 / E235A
Cutter: EXWX03U1.00C1.00R04 (ø25.4 mm, z = 4)
Insert: WXMU0303ZER-MM
Grade: AH3225
Cutting conditions: Vc = 255 (m/min)
fz = 0.28 (mm/t)
ap = 1 (mm)
ae = 25.4 (mm)
Application: Hole enlarging
Coolant: Wet
Machine: Vertical M/C, CAT40
Part: Machine part
Material: S45C / C45
Cutter: EXWX03M025C25.0R04 (ø25 mm, z = 4)
Insert: WXMU0303ZER-MM
Grade: AH3225
Cutting conditions: Vc = 200 (m/min)
fz = 0.3 (mm/t)
ap = 0.5 (mm)
ae = 25 (mm)
Application: Slotting, Shoulder milling
Coolant: Dry
Machine: Vertical M/C, BT40

Standard cutting conditions

ISO Workpiece materials Hardness Priority Grades Chipbreaker Cutting speed
Vc (m/min)
Feed per tooth
fz (mm/t)
Tool dia: DCX (mm), Number of revolution: n (min-1), Feed speed: Vf (mm/min), Max. depth of cut: APMX = 1 mm, Number of teeth: CICT
ø16, CICT = 2 ø20, CICT = 3 ø25, CICT = 4 ø32, CICT = 5 ø40, CICT = 6 ø50, CICT = 8
n Vf n Vf n Vf n Vf n Vf n Vf
Low carbon steel
S15C, SS400, etc.
C15, C20, etc.
– 300HB First choice AH3225 MM 100 – 300 0.5 – 1.5 3,981 7,962 3,185 9,554 2,548 10,191 1,990 9,952 1,592 9,554 1,274 10,191
For wear resistance AH8015 Vc = 200 m/min, fz = 1 mm/t
Carbon steel, Alloy steel
S55C, SCM440, etc.
C55, 42CrMoS4, etc.
– 300HB First choice AH3225 MM 100 – 250 0.5 – 1.5 3,981 7,962 3,185 9,554 2,548 10,191 1,990 9,952 1,592 9,554 1,274 10,191
For wear resistance AH8015 Vc = 200 m/min, fz = 1 mm/t
Prehardened steel
NAK80, PX5, etc.
30 – 40HRC First choice AH3225 MM 100 – 200 0.5 – 1.2 2,986 5,971 2,389 7,166 1,911 7,643 1,493 7,464 1,194 7,166 955 7,643
For wear resistance AH8015 Vc = 150 m/min, fz = 0.7 mm/t
Austenitic Stainless steel
SUS304, SUS316, etc.
X5CrNi18-9, X5CrNiMo17-12-2, etc.
– 200HB First choice AH3225 MM 80 – 150 0.5 – 1 2,389 4,777 1,911 5,732 1,529 6,115 1,194 5,971 955 5,732 764 6,115
Vc = 120 m/min, fz = 0.5 mm/t
Martensitic Stainless steel
SUS410, SUS420J1, etc.
X12Cr13, X20Cr13, etc.
– 200HB First choice AH3225 MM 50 – 120 0.3 – 1 1,990 3,981 1,592 4,777 1,274 5,096 995 4,976 796 4,777 637 5,096
Vc = 100 m/min, fz = 0.3 mm/t
Grey cast iron
FC250, FC300, etc. 250, 300, etc.
150 – 250HB First choice AH8015 MM 100 – 300 0.5 – 1.5 3,981 7,962 3,185 9,554 2,548 10,191 1,990 9,952 1,592 9,554 1,274 10,191
For impact resistance AH3225 Vc = 200 m/min, fz = 1 mm/t
Ductile cast iron
FCD400, etc. 400-15, 600-3, etc.
150 – 250HB First choice AH8015 MM 80 – 200 0.5 – 1.5 2,986 5,971 2,389 7,166 1,911 7,643 1,493 7,464 1,194 7,166 955 7,643
For impact resistance AH3225 Vc = 150 m/min, fz = 1 mm/t
Titanium alloy
Ti-6AI-4V, etc.
– 40HRC First choice AH3225 MM 30 – 60 0.3 – 0.7 796 1,592 637 1,911 510 2,038 398 1,990 318 1,911 255 2,038
Vc = 40 m/min, fz = 0.4 mm/t
Superalloys
Inconel718, etc.
– 40HRC First choice AH8015 MM 20 – 50 0.1 – 0.3 597 1,194 478 1,433 382 1,529 299 1,493 239 1,433 191 1,529
Vc = 30 m/min, fz = 0.2 mm/t
Hardened steel SKD61, etc.
X40CrMoV5-1, etc.
40 – 50HRC First choice AH8015 MM 80 – 150 0.1 – 0.5 2,389 4,777 1,911 5,732 1,529 6,115 1,194 5,971 955 5,732 764 6,115
For impact resistance AH3225 Vc = 120 m/min, fz = 0.3 mm/t
SKD11, etc.
X153CrMoV12, etc.
50 – 60HRC First choice AH8015 MM 50 – 70 0.03 – 0.1 1,194 2,389 955 2,866 764 3,057 597 2,986 478 2,866 382 3,057
Vc = 60 m/min, fz = 0.1 mm/t

For more information about this product, visit our online e-catalog or download the product report:

Sklep online

Sklep on-line

Sklep on-line
Znajdź i zamów narzędzia online

więcej...

e-Katalog

e-Katalog

Katalog elektroniczny
Ściągnij rysunki CAD i modele 3D

więcej...

Aplikacje i przydatne narzędzia