Tung-Tri

product_Milling_Tung-Tri

Shoulder milling cutter with cost-efficient inserts and outstanding chatter stability

Economical 3 cutting-edge insert with large rake angle on cutting edge reduces cutting force and provides excellent chip formation
Optimized flank face on insert and differential pitch on cutter prevent chatter in machining

Applications & Features

Shoulder millingShoulder milling RSlottingSlotting RSide millingPocketingRampingPlungingHole enlarging

1. 3 cutting-edge insert

2.Drastically reduced cutting force

3. Excellent wall accuracy

• High wall accuracy due to helical cutting edge

Inserts & Grades

Inserts

TO*T

  • Maximum depth of cut
  • – TO*T04: 3.5 mm
  • – TO*T06: 6 mm
  • – TO*T10: 10 mm
    – TO*T15: 15 mm
  • Economical 3 cutting-edge inserts with low cutting force
Main Grades

AH3135

  • High fracture resistance
  • Suitable for machining steel and stainless steel under general cutting conditions

AH3225

  • Good balance between wear and fracture resistance
  • Suitable for steel and stainless steel

AH8015

  • Good balance between wear and fracture resistance

  •  First choice for machining heat-resistant alloy under general cutting conditions

Cutter bodies

Shank Type

EPA04/06/10/15 (ø8 – ø50 mm)

Cylindrical type holder for shoulder milling

Modular Type

HPA06-M (ø16 – ø32mm)

Modular head (TungFlex) for shoulder milling

Bore Type

TPA06/10/15 (ø32 – ø160 mm)

Bore type for shoulder milling

Bore Type

TLA series / C-EPA

Long depth of cut shoulder milling / TUNGCAP type

Practical examples

Part: Plate
Material: SUS304 / X5CrNi18-9
Cutter: EPA06R020M20.0-03N (ø20 mm, z = 3)
Insert: TOMT060304PDER-MJ
Grade: AH3135
Cutting conditions: Vc = 125 (m/min)
fz = 0.083 (mm/t)
Vf = 600 (mm/min)
ap = 1.5 (mm)
ae = 9 (mm)
Application: Face milling
Coolant: Dry
Machine: BT40
Part: Machine part
Material: S45C / C45
Cutter: EPA10R032M32.0-03N (ø32 mm, z = 3)
Insert: TOMT100404PDER-MJ
Grade: AH3135
Cutting conditions: Vc = 150 (m/min)
fz = 0.19 (mm/t)
Vf = 836 (mm/min)
ap = 1 (mm)
ae = 5 (mm)
Application: Shoulder milling
Coolant: Wet (External supply)
Machine: Turn-Mill center
Part: Base
Material: S50C / C50
Cutter: EPA10R032M32.0-03N (ø32 mm, z = 3)
Insert: TOMT100404PDER-MJ
Grade: AH3135
Cutting conditions: Vc = 130 (m/min)
fz = 0.1 (mm/t)
Vf = 390 (mm/min)
ap = 1.5 (mm)
ae = 25 (mm)
Application: Shoulder milling
Coolant: External air
Machine: Vertical M/C
Process: ,
Machine:

Standard cutting conditions

EPA04
ISO Workpiece materials Hardness Grades Cutting speed
Vc (m/min)
Feed per tooth
fz (mm/t)
Low carbon steel
SS400, S15C , etc.
E275A, C15E4, etc.
– 200 HB AH3225 100 – 250 0.05 – 0.12
Carbon steel and alloy steel
S55C, SCM440, etc.
C55, 42CrMo4, etc.
– 300 HB AH3225 100 – 230 0.05 – 0.12
Prehardened steel
NAK80, PX5, etc.
30 – 40 HRC AH3225 100 – 180 0.05 – 0.1
Stainless steel
SUS304, etc.
X5CrNi18-9, etc.
AH3225 90 – 200 0.05 – 0.1
Grey cast iron
FC250, etc.
2
50, etc., GG25, etc.
150 – 250 HB AH120 100 – 300 0.05 – 0.12
Ductile cast iron
FCD450, etc.
450-10S, etc., GGG45, etc.
150 – 250 HB AH120 100 – 200 0.05 – 0.12
Titanium alloys
Ti-6AI-4V, etc.
AH3225 20 – 60 0.04 – 0.07
Heat-resistant alloys
Inconel 718, etc.
AH8015 20 – 40 0.04 – 0.07
Hardened steel SKD61, etc.
X40CrMoV5-1, etc.
40 – 50 HRC AH8015 50 – 150 0.04 – 0.07
SKD11, etc.
X153CrMoV12, etc.
50 – 60 HRC AH8015 40 – 70 0.04 – 0.07
  • Remove excessive chip accumulation with an air blast.
  • For an operation when the depth of cut varies (ex.casting skin) or machining of workpiece materials with interrupted surface, the feed per tooth (fz) should be set to the lower recommended value shown in the above table.
  • Cutting conditions may be limited depending on machine power, workpiece rigidity, and spindle output. When the cutting width, depth, or overhang length is large, set Vc and fz to the lower recommended values and check the machine power and vibration.
T/E/HPA06, T/E/HPA10, T/EPA15
ISO Workpiece materials Hardness Priority Chipbreakers Grades T/E/HPA06 T/E/HPA10 T/EPA15
Cutting
speedVc
(m/min)
Feed per
tooth
fz
(mm/t)
Cutting
speed
Vc
(m/min)
Feed per tooth
fz
(mm/t)
Cutting
speed
Vc
(m/min)
Feed per tooth
fz (mm/t)
MJ/AJ NMJ
Low carbon steel
SS400, S15C , etc.
E275A, C15E4, etc.
– 200 HB First choice MJ/NMJ AH3225 100 – 220 0.05 – 0.15 100 – 250 0.08 – 0.2 100 – 300 0.06 – 0.22 0.06 – 0.15
Wear resistance MJ/NMJ T3225 100 – 250 0.08 – 0.1 100 – 300 0.08 – 0.12 100 – 300 0.08 – 0.15 0.08 – 0.15
Carbon steel and
alloy steel
S55C, SCM440, etc.
C55, 42CrMo4, etc.
– 300 HB First choice MJ/NMJ AH3225 100 – 170 0.05 – 0.12 100 – 250 0.06 – 0.22 100 – 250 0.06 – 0.22 0.06 – 0.15
Wear resistance MJ/NMJ T3225 100 – 250 0.05 – 0.1 100 – 300 0.05 – 0.12 100 – 300 0.05 – 0.15 0.05 – 0.15
Prehardened steel and tool steel
NAK80, PX5, SKD61, etc.
X40CrMoV5-1, etc.
30 – 40 HRC First choice MJ/NMJ AH3225 100 – 120 0.05 – 0.12 100 – 200 0.06 – 0.22 100 – 200 0.06 – 0.22 0.06 – 0.15
Wear resistance MJ/NMJ T3225 100 – 250 0.05 – 0.1 100 – 300 0.05 – 0.12 100 – 300 0.05 – 0.15 0.05 – 0.15
Stainless steel
SUS304, etc.
X5CrNi18-9, etc.
First choice MJ/NMJ AH3135 80 – 150 0.05 – 0.15 80 – 200 0.08 – 0.2 90 – 200 0.08 – 0.2 0.08 – 0.15
Wear resistance MJ/NMJ T3225 90 – 200 0.05 – 0.1 90 – 250 0.05 – 0.12 90 – 250 0.05 – 0.15 0.05 – 0.15
Grey cast iron
FC250, etc.
250, etc.
GG25, etc.
150 – 250 HB First choice MJ/NMJ AH120 100 – 200 0.05 – 0.15 100 – 250 0.05 – 0.15 140 – 250 0.08 – 0.25 0.08 – 0.15
Wear resistance MJ T1215 150 – 250 0.05 – 0.12 150 – 300 0.08 – 0.2 200 – 300 0.08 – 0.18
Ductile cast iron
FCD450, etc.
450-10S, etc.
GGG45, etc.
150 – 250 HB First choice MJ/NMJ AH120 80 – 150 0.05 – 0.15 80 – 200 0.08 – 0.2 110 – 200 0.08 – 0.25 0.08 – 0.15
Wear resistance MJ T1215 100 – 200 0.05 – 0.12 130 – 250 0.05 – 0.15 150 – 250 0.08 – 0.18
Aluminium
Si < 13%
First choice AJ KS05F 300 – 900 0.08 – 0.22 300 – 1000 0.08 – 0.22 300 – 1000 0.08 – 0.22
Aluminium
Si ≥ 13%
First choice AJ KS05F 100 – 200 0.08 – 0.22 100 – 200 0.08 – 0.22 100 – 200 0.08 – 0.22
Titanium alloys
Ti-6Al-4V, etc.
First choice MJ/NMJ AH3135 20 – 50 0.05 – 0.1 20 – 60 0.05 – 0.1 20 – 60 0.08 – 0.15 0.08 – 0.15
Heat-resistant alloys
Inconel 718, etc.
First choice MJ/NMJ AH120 20 – 35 0.03 – 0.08 20 – 40 0.05 – 0.13 20 – 40 0.07 – 0.15 0.07 – 0.15
  • When you use the NMJ chipbreaker, please set up the feed less than 0.15 mm/t.
  • Remove excessive chip accumulation with an air blast.
  • For an operation when the depth of cut varies (ex.casting skin) or machining of workpiece materials with interrupted surface, the feed per tooth (fz) should be set to the lower recommended value shown in the above table.
  • Cutting conditions may be limited depending on machine power, workpiece rigidity, and spindle output. When the cutting width, depth, or overhang length is large, set Vc and fz to the lower recommended values and check the machine power and vibration.
TLA (Roughing type)
ISO Workpiece materials Hardness Priority Chipbreakers Grades TLA10 TLA15
Cutting
speed
Vc
(m/min)
Feed per tooth
fz
(mm/t)
Cutting
speed
Vc
(m/min)
Feed per tooth
fz (mm/t)
MJ/AJ NMJ
Low carbon steel
SS400, S15C , etc.
E275A, C15E4, etc.
– 200 HB First choice MJ/NMJ AH3225 100 – 250 0.08 – 0.2 100 – 300 0.06 – 0.22 0.06 – 0.15
Wear resistance MJ/NMJ T3225 100 – 300 0.08 – 0.12 100 – 300 0.08 – 0.15 0.08 – 0.15
Carbon steel and
alloy steel
S55C, SCM440, etc.
C55, 42CrMo4, etc.
– 300 HB First choice MJ/NMJ AH3225 100 – 250 0.06 – 0.22 100 – 250 0.06 – 0.22 0.06 – 0.15
Wear resistance MJ/NMJ T3225 100 – 300 0.05 – 0.12 100 – 300 0.05 – 0.15 0.05 – 0.15
Prehardened steel and
tool steel
NAK80, PX5, SKD61, etc.
X40CrMoV5-1, etc.
30 – 40 HRC First choice MJ/NMJ AH3225 100 – 200 0.06 – 0.22 100 – 200 0.06 – 0.22 0.06 – 0.15
Wear resistance MJ/NMJ T3225 100 – 300 0.05 – 0.12 100 – 300 0.05 – 0.15 0.05 – 0.15
Stainless steel
SUS304, etc.
X5CrNi18-9, etc.
First choice MJ/NMJ AH3135 80 – 200 0.08 – 0.2 90 – 200 0.08 – 0.2 0.08 – 0.15
Wear resistance MJ/NMJ T3225 90 – 250 0.05 – 0.12 90 – 250 0.05 – 0.15 0.05 – 0.15
Grey cast iron
FC250, etc.
250, etc.
GG25, etc.
150 – 250 HB First choice MJ/NMJ AH120 100 – 250 0.05 – 0.15 140 – 250 0.08 – 0.25 0.08 – 0.15
Wear resistance MJ T1215 150 – 300 0.08 – 0.2 200 – 300 0.08 – 0.18
Ductile cast iron
FCD450, etc.
450-10S, etc.
GGG45, etc.
150 – 250 HB First choice MJ/NMJ AH120 80 – 200 0.08 – 0.2 110 – 200 0.08 – 0.25 0.08 – 0.15
Wear resistance MJ T1215 130 – 250 0.05 – 0.15 150 – 250 0.08 – 0.18
Aluminium
Si < 13%
40 – 50 HRC First choice AJ KS05F 300 – 1000 0.08 – 0.22 300 – 1000 0.08 – 0.22
Aluminium
Si ≥ 13%
50 – 60 HRC First choice AJ KS05F 100 – 200 0.08 – 0.22 100 – 200 0.08 – 0.22
Titanium alloys
Ti-6Al-4V, etc.
First choice MJ/NMJ AH3135 20 – 60 0.05 – 0.1 20 – 60 0.08 – 0.15 0.08 – 0.15
Heat-resistant alloys
Inconel 718, etc.
First choice MJ/NMJ AH120 20 – 40 0.05 – 0.13 20 – 40 0.07 – 0.15 0.07 – 0.15
  • When using NMJ chipbreaker, please set up the feed not to exceed 0.15 mm/t.

For more information about this product, visit our online e-catalog or download the product report:

Online shop

Online shop

Online shop
Pohodlné vyhledání a objednání nástrojů  - online 24/7

Více informací

e-Catalog

Elektronický katalog nástrojů

Elektronický katalog nástrojů
CAD výkresy a 3D modely ke stažení

Více informací

Zdroje