SpinJet

Coolant-driven high speed compact spindle

Productivity quadruples due to spindles that rotate at high speed with coolant pressure

Features

Holders & Accessories

Practical examples

Standard cutting conditions

TJS M00

Workpiece material	Tool	Application	Tool diameter DC (mm)	Coolant pressure (MPa)	Spindle speed n (min-1)	Width of cut ae (mm)	Depth of cut ap (mm)	Feed per tooth fz (mm/t)
Alloy steel 35 HRC	Drill	Drilling	0.5	1.5	18,000	–	–	0.007
				2	23,000	–	–	0.01
				3	31,000	–	–	0.01
				4	40,000	–	–	0.01
			1	1.5	18,000	–	–	0.01
				2	23,000	–	–	0.01
				3	31,000	–	–	0.01
				4	40,000	–	–	0.01
			2	1.5	18,000	–	–	0.01
				2	23,000	–	–	0.01
				3	31,000	–	–	0.01
				4	40,000	–	–	0.01
	Ball type endmill	Profiling	1	1.5	18,000	–	0.05	0.003
				2	23,000	–	0.05	0.003
				3	31,000	–	0.05	0.003
				4	40,000	–	0.05	0.003
			2	1.5	18,000	–	0.08	0.004
				2	23,000	–	0.08	0.004
				3	31,000	–	0.08	0.004
				4	40,000	–	0.08	0.004
			3	1.5	18,000	–	0.1	0.006
				2	23,000	–	0.1	0.006
				3	31,000	–	0.1	0.006
				4	40,000	–	0.1	0.006
	Endmill	Slotting	1	1.5	18,000	1	0.1	0.006
				2	23,000	1	0.1	0.006
				3	31,000	1	0.1	0.006
				4	40,000	1	0.15	0.006
			2	1.5	18,000	2	0.12	0.01
				2	23,000	2	0.12	0.01
				3	31,000	2	0.14	0.01
				4	40,000	2	0.14	0.01
			3	1.5	18,000	3	0.12	0.01
				2	23,000	3	0.12	0.01
				3	31,000	3	0.12	0.01
				4	40,000	3	0.15	0.01
		Shouldering	2	1.5	18,000	0.5	0.5	0.002
				2	23,000	0.5	0.5	0.014
				3	31,000	0.5	0.5	0.017
				4	40,000	0.5	0.5	0.018
Stainless steel 180 – 250 HB	Drill	Drilling	0.5	1.5	18,000	–	–	0.015
				2	23,000	–	–	0.015
				3	31,000	–	–	0.015
				4	40,000	–	–	0.015
			1	1.5	18,000	–	–	0.015
				2	23,000	–	–	0.015
				3	31,000	–	–	0.015
				4	40,000	–	–	0.015
			2	1.5	18,000	–	–	0.015
				2	23,000	–	–	0.015
				3	31,000	–	–	0.015
				4	40,000	–	–	0.015
	Endmill	Slotting	1	1.5	18,000	1	0.1	0.015
				2	23,000	1	0.1	0.015
				3	31,000	1	0.15	0.015
				4	40,000	1	0.15	0.015
			2	1.5	18,000	2	0.15	0.015
				2	23,000	2	0.15	0.015
				3	31,000	2	0.15	0.015
				4	40,000	2	0.2	0.015
		Shouldering	2	1.5	18,000	0.35	0.15	0.02
				2	23,000	0.35	0.15	0.02
				3	31,000	0.4	0.15	0.02
				4	40,000	0.5	0.18	0.025
Aluminium alloy 80 – 160 HB	Drill	Drilling	0.5	1.5	18,000	–	–	0.01
				2	23,000	–	–	0.01
				3	31,000	–	–	0.01
				4	40,000	–	–	0.01
			1	1.5	18,000	–	–	0.01
				2	23,000	–	–	0.01
				3	31,000	–	–	0.01
				4	40,000	–	–	0.01
			2	1.5	18,000	–	–	0.015
				2	23,000	–	–	0.015
				3	31,000	–	–	0.017
				4	40,000	–	–	0.018
	Ball type endmill	Profiling	1	1.5	18,000	–	0.05	0.003
				2	23,000	–	0.05	0.003
				3	31,000	–	0.05	0.003
				4	40,000	–	0.13	0.003
			2	1.5	18,000	–	0.08	0.004
				2	23,000	–	0.08	0.004
				3	31,000	–	0.08	0.004
				4	40,000	–	0.15	0.004
			3	1.5	18,000	–	0.08	0.006
				2	23,000	–	0.09	0.006
				3	31,000	–	0.09	0.006
				4	40,000	–	0.15	0.006
	Endmill	Slotting	1	1.5	18,000	1	0.1	0.025
				2	23,000	1	0.1	0.025
				3	31,000	1	0.15	0.025
				4	40,000	1	0.15	0.025
			2	1.5	18,000	2	0.2	0.025
				2	23,000	2	0.2	0.025
				3	31,000	2	0.2	0.025
				4	40,000	2	0.2	0.025
		Shouldering	2	1.5	18,000	0.5	0.25	0.02
				2	23,000	0.5	0.25	0.02
				3	31,000	0.5	0.5	0.02
				4	40,000	0.5	0.5	0.025

TJS M90

Workpiece material	Tool	Application	Tool diameter DC (mm)	Coolant pressure (MPa)	Spindle speed n (min-1)	Width of cut ae (mm)	Depth of cut ap (mm)	Feed per tooth fz (mm/t)
Pre-hardened steel 35 HRC	Drill	Drilling	0.5	2	35,000	–	–	0.01
				3	44,000	–	–	0.01
				4	53,000	–	–	0.01
			1	2	35,000	–	–	0.01
				3	44,000	–	–	0.01
				4	53,000	–	–	0.01
			2	2	35,000	–	–	0.01
				3	44,000	–	–	0.01
				4	53,000	–	–	0.01
	Ball type endmill	Profiling	1	2	35,000	–	0.05	0.003
				3	44,000	–	0.05	0.003
				4	53,000	–	0.05	0.003
			2	2	35,000	–	0.08	0.004
				3	44,000	–	0.08	0.004
				4	53,000	–	0.08	0.004
			3	2	35,000	–	0.1	0.006
				3	44,000	–	0.1	0.006
				4	53,000	–	0.1	0.006
	Endmill	Slotting	0.5	2	35,000	0.5	0.05	0.006
				3	44,000	0.5	0.05	0.006
				4	53,000	0.5	0.05	0.006
			1	2	35,000	1	0.1	0.006
				3	44,000	1	0.1	0.006
				4	53,000	1	0.15	0.006
			2	2	35,000	2	0.12	0.01
				3	44,000	2	0.14	0.01
				4	53,000	2	0.14	0.01
			3	2	35,000	3	0.12	0.01
				3	44,000	3	0.12	0.01
				4	53,000	3	0.15	0.01
		Shouldering	2	2	35,000	0.5	0.5	0.001
				3	44,000	0.5	0.5	0.017
				4	53,000	0.5	0.5	0.018
Stainless steel SUS316 35 HRC	Drill	Drilling	0.5	2	35,000	–	–	0.015
				3	44,000	–	–	0.015
				4	53,000	–	–	0.015
			1	2	35,000	–	–	0.015
				3	44,000	–	–	0.015
				4	53,000	–	–	0.015
			2	2	35,000	–	–	0.015
				3	44,000	–	–	0.015
				4	53,000	–	–	0.015
	Endmill	Slotting	1	2	35,000	1	0.1	0.015
				3	44,000	1	0.15	0.015
				4	53,000	1	0.15	0.015
			2	2	35,000	2	0.15	0.015
				3	44,000	2	0.15	0.015
				4	53,000	2	0.2	0.015
		Shouldering	2	2	35,000	0.35	0.15	0.02
				3	44,000	0.4	0.15	0.02
				4	53,000	0.5	0.18	0.025
Aluminium alloy ADC12 28 HRC	Drill	Drilling	0.5	2	35,000	–	–	0.01
				3	44,000	–	–	0.01
				4	53,000	–	–	0.01
			1	2	35,000	–	–	0.01
				3	44,000	–	–	0.01
				4	53,000	–	–	0.01
			2	2	35,000	–	–	0.015
				3	44,000	–	–	0.017
				4	53,000	–	–	0.018
	Ball type endmill	Profiling	1	2	35,000	–	0.05	0.003
				3	44,000	–	0.05	0.003
				4	53,000	–	0.13	0.003
			2	2	35,000	–	0.08	0.004
				3	44,000	–	0.08	0.004
				4	53,000	–	0.15	0.004
			3	2	35,000	–	0.08	0.006
				3	44,000	–	0.09	0.006
				4	53,000	–	0.15	0.006
	Endmill	Slotting	0.5	2	35,000	0.5	0.1	0.02
				3	44,000	0.5	0.12	0.02
				4	53,000	0.5	0.15	0.02
			1	2	35,000	1	0.1	0.025
				3	44,000	1	0.15	0.025
				4	53,000	1	0.15	0.025
			2	2	35,000	2	0.2	0.025
				3	44,000	2	0.2	0.025
				4	53,000	2	0.2	0.025
		Shouldering	2	2	35,000	0.5	0.25	0.02
				3	44,000	0.5	0.5	0.02
				4	53,000	0.5	0.5	0.025
Tool steel SKD61 58 HRC	Ball type endmill	Profiling	1	2	35,000	–	0.05	0.005
				3	44,000	–	0.05	0.005
				4	53,000	–	0.05	0.005
			2	2	35,000	–	0.07	0.006
				3	44,000	–	0.08	0.006
				4	53,000	–	0.08	0.006
			3	2	35,000	–	0.08	0.006
				3	44,000	–	0.1	0.006
				4	53,000	–	0.1	0.006

For more information about this product, visit our online e-catalog or download the product report:

e-Catalog

Metric | Imperial

PDF

Metric

Main product report_No. 428-G
- Expansion Adaption type ER32,BT40,HSKA63,C6,ST20,CAT40_No. 428S1-G
- Expansion TJS M90,TJS M00_No. 428S2-G

Video

How to use Spinjet

Contact Tungaloy relate to SpinJet

If you need some assistances from Tungaloy, please contact us in the follwoing contact form

Contact form

BACK

Online shop

Online shop
Pohodlné vyhledání a objednání nástrojů - online 24/7

Více informací

Elektronický katalog nástrojů

Elektronický katalog nástrojů
CAD výkresy a 3D modely ke stažení

Part:	Machine parts
Material:	SUS303 / X10CrNiS18-9 (25HRC)
Holder:	TJSGJETST20
Endmill:	TEB010A2-015/12C4M45 (ø1.0, z = 2)
Grade:	AH750
Cutting conditions:	Vc = 120 (m/min) n = 45,600 (RPM) fz = 0.016 (mm/t) ap = 0.01 (mm) ae = 1 (mm) Application: Grooving Coolant: Wet Machine: Vertical M/C, BT30

Part:	Electrode
Material:	C1100
Holder:	TJSGJETST20
Endmill:	TEB010A2-015/12C4M45 (ø1.0, z = 2)
Grade:	AH750
Cutting conditions:	Vc = 95 (m/min) n = 40,000 (RPM) fz = 0.025 (mm/t) ap = 0.04 (mm) ae = 0.04 (mm) Application: Profiling Coolant: Wet Machine: Vertical M/C, BT30

Part:	Medical equipment
Material:	Titanium alloys
Holder:	TJSGJETER32
Endmill:	TEB010A2-015/12C4M45 (ø1.0, z = 2)
Grade:	AH750
Cutting conditions:	Vc = 80 (m/min) n = 35,000 (RPM) fz = 0.03 (mm/t) ap = 0.03 (mm) ae = 0.05 (mm) Application: Profiling Coolant: Wet Machine: Vertical M/C, BT30

SpinJet

Coolant-driven high speed compact spindle

Features

1. Coolant-driven HSM spindle for high productivity with small diameter tools on limited RPM machines

2. Energy saving

3. Wireless RPM monitoring system

Holders & Accessories

Holders

SpinJet holders

Accessories

SpinJet Accessories

Practical examples

Example #1

General Engineering

Example #2

Die and Mold Industry

Example #3

Medical Industry

Standard cutting conditions

TJS M00

TJS M90

e-Catalog

PDF

Metric

Video

Contact Tungaloy relate to SpinJet

Search

Related News

Online shop

Více informací

Elektronický katalog nástrojů

Více informací

Zdroje

SNS – Global

SNS – Tungaloy Czech s.r.o.

SpinJet

Coolant-driven high speed compact spindle

Features

1. Coolant-driven HSM spindle for high productivity with small diameter tools on limited RPM machines

2. Energy saving

3. Wireless RPM monitoring system

Holders & Accessories

Holders

SpinJet holders

Accessories

SpinJet Accessories

Practical examples

Example #1

General Engineering

Example #2

Die and Mold Industry

Example #3

Medical Industry

Standard cutting conditions

TJS M00

TJS M90

e-Catalog

PDF

Metric

Video

Contact Tungaloy relate to SpinJet

Search

Related News

Tungaloy Adds Compact Type to “SpinJet” Coolant-Driven High-Speed Spindle Series

Tungaloy’s New HPC-SpinJet Ramps Up RPMs for Small Cutters with Higher Coolant Pressure

Online shop

Více informací

Elektronický katalog nástrojů

Více informací

Zdroje

SNS – Global

SNS – Tungaloy Czech s.r.o.