安装经济型8刀尖刀片的轻切削平面铣刀
拥有8个刀尖，轻切削和优化断屑槽的大前角刀片
应用 & 特点
应用
特点
1. 大前刀面平面铣刀
• 带大前角的刀片实现了轻切削。
2. 可选3种类型的刀片
3. 加工稳定
• 理想的切屑形状。
• 双后角设计获得更好的刀片可靠性。
刀片 & 材质
刀体
实际案例
案例 #1
通用工程
| 零件: | 半导体设备零件 |
| 材料: | EN 1.4301 |
| 刀盘: | TAOW05M063B22.0R05 |
| 刀片: | OWHT05T3C07AFER-MM |
| 材质: | AH3135 |
| 加工条件: | Vc = 160 (m/min) fz = 0.2 (mm/t) Vf = 808 (mm/min) ap = 1.6 (mm) ae = 19 (mm) 应用: 平面铣削 冷却方式: 外冷 机床: 立式加工中心 (BT40) |
案例 #2
通用工程
| 零件: | 底座 |
| 材料: | ISO E275A |
| 刀盘: | TAOW05J100B31.7R06 |
| 刀片: | OWHT05T3C07AFER-MM |
| 材质: | AH3135 |
| 加工条件: | Vc = 220 (m/min) fz = 0.2 (mm/t) Vf = 840 (mm/min) ap = 2 (mm) ae = 100 (mm) 应用: 平面铣削 冷却方式: 外冷 机床: 立式加工中心 |
案例 #3
通用工程
| 零件: | 设备零件 |
| 材料: | EN 1.7225 |
| 刀盘: | TAOW05M063B22.0R05 |
| 刀片: | OWMT05T3AFER-MM |
| 材质: | AH3135 |
| 加工条件: | Vc = 150 (m/min) fz = 0.26 (mm/t) Vf = 1000 (mm/min) ap = 2.6 (mm) ae = 18 (mm) 应用: 平面铣削 冷却方式: 内冷 机床: 立式加工中心 (BT40) |
标准加工条件
| ISO | Workpiece material | Hardness | Priority | Grade | Chip-breaker | Cutting speed Vc (m/min) |
Feed per tooth fz (mm/t) |
|---|---|---|---|---|---|---|---|
 |
Low carbon steel (C15, etc.) |
– 200HB | First choice | AH3135 | MM | 100 – 300 | 0.05 – 0.35 |
| Wear resistance | AH120 | MM | 100 – 300 | 0.05 – 0.35 | |||
| High carbon and alloy steel (S55C / C55, SCM440 / 42CrMo4, etc.) |
– 300HB | First choice | AH3135 | MM | 100 – 250 | 0.05 – 0.3 | |
| Wear resistance | AH120 | MM | 100 – 250 | 0.05 – 0.3 | |||
| Prehardened steel (NAK80, PX5, etc.) |
30 – 40 HRC | First choice | AH3135 | MM | 80 – 200 | 0.05 – 0.3 | |
| Wear resistance | AH120 | MM | 80 – 200 | 0.05 – 0.3 | |||
 |
Austenitic stainless steel (SUS304 / 1.4301, SUS316 / 1.4401, etc.) |
– 200HB | First choice | AH3135 | MM | 100 – 200 | 0.05 – 0.35 |
| Wear resistance | AH120 | MM | 100 – 200 | 0.05 – 0.35 | |||
| Martensitic stainless steel ( X20Cr13, etc.) |
– 220HB | First choice | AH3135 | MM | 100 – 300 | 0.05 – 0.3 | |
| Wear resistance | AH120 | MM | 100 – 300 | 0.05 – 0.3 | |||
 |
Gray cast iron (FC250 / 250, etc.) |
150 – 250HB | First choice | AH120 | MM | 100 – 300 | 0.05 – 0.35 |
| Fracture resistance | AH3135 | MM | 100 – 300 | 0.05 – 0.35 | |||
| Ductile cast iron (FCD400 / 400-15, FCD600 / 600-3, etc.) |
150 – 250HB | First choice | AH120 | MM | 80 – 250 | 0.05 – 0.3 | |
| Fracture resistance | AH3135 | MM | 80 – 250 | 0.05 – 0.3 | |||
 |
Titanium alloys (Ti-6AI-4V, etc.) |
– | First choice | AH3135 | MM | 30 – 60 | 0.05 – 0.2 |
| Wear resistance | AH120 | MM | 30 – 60 | 0.05 – 0.2 | |||
| Heat-resistant alloys (Inconel718, etc.) |
– | First choice | AH120 | MM | 20 – 50 | 0.05 – 0.15 | |
| Fracture resistance | AH3135 | MM | 20 – 50 | 0.05 – 0.15 | |||
 |
Hardened steel (SKD61 / X40CrMoV51, etc.) |
40 – 50HRC | First choice | AH3135 | MM | 70 – 130 | 0.05 – 0.15 |
| Wear resistance | AH120 | MM | 70 – 130 | 0.05 – 0.15 |
