Search

TungSix-Drill

Giriş / Ürünler / Hole making / TungSix-Drill
product_Holemaking_TungSix-Drill

Indexable drill with economical 6 cutting edges insert

6 cornered insert with high performance that’s an extremely economical solution

Applications & Features

Applications

Drilling

Features

1. Double-sided insert with 6-cutting edges

• TungSixDrill is the first indexable drill in the world to adapt double-sided inserts with 6-cutting edges, reducing the insert consumption for the customers.

2. Low cutting force even with double sided insert

• The cutting forces are almost equal to competitors positive single sided inserts, especially at higher feed rates, thus complementing higher productivity.

3. Enhanced corner of central insert

• The central corner is strengthened by an obtuse angle relief thus increasing the corner strength and reliability.

4. TungDrillBig

Drill body with adjustable cartridge covers hole diameter ranges from: øDc: ø55 mm – ø80 mm, L/D = 2.5

  • Highly rigid body and optimized insert position

    Provides well balanced cutting forces and stable machining conditions for highly accurate hole making.

  • Adjustable tool diameter

    TungDrillBig features 5 drill body sizes that can accommodate a range of setting plates covering a diameter range from ø55 mm – ø80 mm.

  • Variety of design options

    TungDrillTwisted and TungDrill-Six type cartridges can be affixed to the same body.

Inserts & Grades

Inserts
TungSix-Drill Inserts

WWMU-DJ / -DS

Inserts for Chamfering Ring

XHGX090700R-45A

Inserts for chamfering tool TDXCF

Main Grades

AH7020

 

  • Wear-resistant grade that enables high speed machining in steel and cast iron. Improved machining efficiency with no compromise on tool life.

AH7030

   

  • First-choice grade in all material groups. Extremely fracture resistant, the grade provides predictability in unstable drilling applications that might, otherwise, induce edge chipping.

AH3135

  • P30 – P40 / M30 – M40

  • High fracture resistance

  • Suitable for machining steel and stainless steel under general cutting  conditions

AH9030

 

  • P15 – P35 / K10 – K25
  • High wear resistance
  • Suitable for drilling steel and cast iron at high speed

AH6030

 

  • M25 – M35 / S15 – S30
  • High fracture resistance
  • Suitable for drilling stainless steel and heat-resistant alloy under general cutting conditions

Drill bodies & Related tools

Drill bodies

TDS-F (ø20 – ø54 mm)

Cylindrical shank with flat cotter and flange

Drill bodies

TDB (ø55 – ø80 mm)

Diameter adjustable with setting plate

Cartridge set

TDSCA (ø55 – ø80 mm)

Cylindrical shank with flat cotter and flange

Chamfering Ring

TDXCF

Added on coaxial of the drill body

Practical examples

Example #1

Automotive Industry

Part: Connecting rod
Material: S55C / C55
Drill: TDS200F25-2, øDc = 20 mm
Insert: WWMU05X205R-DJ
Grade: AH9030
Cutting conditions: Vc = 200 (m/min)
f = 0.15 (mm/rev)
Vf = 477 (mm/min)
H = 30 (mm)
Coolant: Wet
Machine: Vertical M/C, BT40
Example #2

General Engineering

Part: Housing
Material: FCD450 / GGG45
Drill: TDS420F40-2, øDc = 42 mm
Insert: WWMU11X512R-DJ
Grade: AH9030
Cutting conditions: Vc = 120 (m/min)
f = 0.2 (mm/rev)
Vf = 180 (mm/min)
H = 80 (mm)
Coolant: Wet
Machine: NC lathe
Example #3

Automotive Industry

Part: Knuckle
Material: SCM440 / 42CrMo4
Drill: TDS500F40-3, øDc = 50 mm
Insert: WWMU13X512R-DJ
Grade: AH9030
Cutting conditions: Vc = 160 (m/min)
f = 0.11 (mm/rev)
Vf = 112 (mm/min)
H = 80, 65 (mm)
Coolant: Wet
Machine: Horizontal M/C, BT50

Standard cutting conditions

Recommended insert
ISO Workpiece material First choice Wear resistance Chip control
Low carbon steel (C ≤ 0.3%) DS AH7030 DS AH7020 DJ AH3135
Carbon steel (C > 0.3%),
Low alloy steel, Alloy steel		 DJ AH7030 DJ AH7020 DJ AH3135
Low alloy steel DS AH7030 DS AH7020 DJ AH3135
Alloy steel DJ AH7030 DJ AH7020 DJ AH3135
Stainless steel DS AH7030 DS AH7020 DJ AH3135
Grey cast irons DJ AH7030 DJ AH7020 –
Ductile cast irons DJ AH7020 – DJ AH7030
Aluminium alloy DS AH7030 – –
Heat-resistant alloys DS AH7020 – DJ AH7020
Titanium alloys DS AH7030 DS AH7020 DJ AH3135
Hardened steel DJ AH7020 – DJ AH7030
Standard cutting conditions
ISO Workpiece material Hardness Cutting speed
Vc (m/min)		 Series
L/D		 Feed: f (mm/rev)
ø20 – ø27.5 ø28 – ø38 ø39 – ø54
Low carbon steels (C < 0.3)
SS400, SM490, S25C, etc.
st42-1, St52-3, C25, etc.		 – 200 HB 160 – 320 2D, 3D 0.04 – 0.1 0.04 – 0.1 0.04 – 0.1
4D 0.04 – 0.1 0.04 – 0.1 0.04 – 0.1
Carbon steels (C > 0.3)
S45C, S55C, etc. C45, C55, etc.		 – 300 HB 80 – 250 2D, 3D 0.06 – 0.15 0.06 – 0.16 0.08 – 0.18
4D 0.06 – 0.15 0.06 – 0.15 0.06 – 0.17
Low alloy steels
SCM415, etc.		 – 200 HB 160 – 250 2D, 3D 0.06 – 0.12 0.06 – 0.12 0.06 – 0.14
4D 0.06 – 0.12 0.06 – 0.12 0.06 – 0.14
Alloy steels
SCM440, SCr420, etc.
42CrMo4, 20Cr4, etc.		 – 300 HB 80 – 200 2D, 3D 0.06 – 0.13 0.06 – 0.15 0.08 – 0.18
4D 0.06 – 0.1 0.06 – 0.12 0.08 – 0.14
Stainless steels (Austenitic)
SUS304, SUS316, etc.
X5CrNi18-9, X5CrNiMo17-12-2, etc.		 – 200 HB 100 – 200 2D, 3D 0.04 – 0.1 0.04 – 0.12 0.04 – 0.12
4D 0.04 – 0.1 0.04 – 0.12 0.04 – 0.12
Stainless steels (Martensitic and ferritic)
SUS430, SUS416, etc.
X6Cr17, X20Cr13, etc.		 – 200 HB 100 – 220 2D, 3D 0.04 – 0.1 0.04 – 0.12 0.04 – 0.12
4D 0.04 – 0.1 0.04 – 0.12 0.04 – 0.12
Stainless steels (Precipitation hardening)
SUS630, etc. X5CrNiCuNb16-4, etc.		 – 80 – 120 2D, 3D 0.04 – 0.08 0.04 – 0.1 0.06 – 0.1
4D 0.04 – 0.08 0.04 – 0.1 0.06 – 0.1
Grey cast irons
FC250, etc., 250, etc.		 150 – 250 HB 80 – 250 2D, 3D 0.06 – 0.15 0.06 – 0.18 0.08 – 0.2
4D 0.06 – 0.12 0.06 – 0.14 0.08 – 0.16
Ductile cast irons
FCD700, etc., 600-3, etc.		 150 – 250 HB 80 – 200 2D, 3D 0.06 – 0.15 0.06 – 0.18 0.08 – 0.2
4D 0.06 – 0.12 0.06 – 0.14 0.08 – 0.16
Aluminium alloy
A2017, ADC12, etc.
AlCu4SiMg, AlSi11Cu3, etc.		 – 200 – 400 2D, 3D 0.15 – 0.2 0.15 – 0.2 0.15 – 0.25
4D 0.12 – 0.16 0.12 – 0.16 0.12 – 0.2
Heat-resistant alloys
Inconel 718, etc.		 – 40 HRC 20 – 60 2D, 3D 0.04 – 0.1 0.04 – 0.1 0.04 – 0.1
4D 0.04 – 0.1 0.04 – 0.1 0.04 – 0.1
Titanium alloys
Ti-6Al-4V, etc.		 – 40 HRC 40 – 120 2D, 3D 0.06 – 0.12 0.06 – 0.12 0.06 – 0.12
4D 0.06 – 0.1 0.06 – 0.1 0.06 – 0.1
Hardened steel – 50 HRC 40 – 100 2D, 3D 0.04 – 0.1 0.04 – 0.1 0.04 – 0.1
4D 0.04 – 0.08 0.04 – 0.08 0.04 – 0.08

For more information about this product, visit our online e-catalog or download the product report:

e-Catalog

Metric  |  Imperial

TungDrillBig (Metric)  |  TungDrillBig (Imperial)
PDF
Online Mağaza

Online Mağaza

Online Mağaza
Çevrimiçi Alışveriş Yapın

Daha Fazla Bilgi Edinin
E-Katalog

E-Katalog

E-Katalog
CAD Çizimlerini ve 3 Boyutlu Modelleri İnceleyin

Daha Fazla Bilgi Edinin
Kaynaklar