DoPent

Applications & Features

Applications

Face milling

Features

1. Economical pentagonal insert

• Double-sided insert with 10 cutting edges.

2. Low cutting force

3. Wide line-up of inserts for various machining

Inserts & Grades

Cutter bodies

Practical examples

Example #1

General Engineering

Part:	Pump housing
Material:	SKD11
Cutter:	TEN09R125M38.1-06 (ø125 mm, z = 6)
Insert:	PNCU0905GNEN-ML
Grade:	AH3135
Cutting conditions:	Vc = 120 (m/min) fz = 0.25 (mm/t) Vf = 458 (mm/min) ap = 3 (mm) ae = 60 (mm) Application: Face milling Coolant: Dry Machine: Horizontal M/C

Example #2

General Engineering

Part:	Rolling die material
Material:	Tool steel
Cutter:	TEN09R160M50.8-12 (ø160 mm, z = 12)
Insert:	PNMU0905GNEN-MJ
Grade:	AH3225
Cutting conditions:	Vc = 300 (m/min) fz = 0.1 (mm/t) Vf = 716 (mm/min) ap = 0.8 (mm) ae = 50 (mm) Application: Face milling Coolant: Dry Machine: Horizontal M/C

Example #3

General Engineering

Part:	EGR valve
Material:	FC250 / 250
Cutter:	TEN09R125M38.1-06 (ø125 mm, z = 6)
Insert:	PNCU0905GNEN-MJ
Grade:	AH120
Cutting conditions:	Vc = 390 (m/min) fz = 0.15 (mm/t) Vf = 900 (mm/min) ap = 0.9 (mm) ae = 75 (mm) Application: Face milling Coolant: External supply Machine: Vertical M/C、6kW
Process:	,
Machine:

View more reports

Standard cutting conditions

ISO	Workpiece materials	Hardness HB	Selection criteria	Recommended grade	Chip- breaker	Cutting speed Vc (m/min)	Feed per tooth fz (mm/t)
	Low carbon steels S15C, C15E4, etc.S15C, C15E4, etc. C15, etc.	200 – 300 HB	First choice	AH3225	MJ	100 – 250	0.1 – 0.4
		200 – 300 HB	Low cutting force	AH3225	ML	100 – 250	0.1- 0.3
		200 – 300 HB	Wear resistance	T3225	MJ	200 – 350	0.1- 0.3
		200 – 300 HB	Surface quality	NS740	MJ	100 – 250	0.1- 0.3
	High carbon steels, alloyed steels S45C, SCM440, etc.S45C, SCM440, etc. C45, 42CrMo4, etc.	150 – 300 HB	First choice	AH3225	MJ	100 – 250	0.1- 0.35
		150 – 300 HB	Low cutting force	AH3225	ML	100 – 250	0.1- 0.3
		150 – 300 HB	Wear resistance	T3225	MJ	180 – 300	0.1- 0.3
		150 – 300 HB	Surface quality	NS740	MJ	100 – 250	0.1- 0.3
	Prehardened steels NAK80, PX5, etc.	30 – 40 HRC	First choice	AH3225	MJ	100 – 200	0.1- 0.3
		30 – 40 HRC	Low cutting force	AH3225	ML	100 – 200	0.1- 0.25
		30 – 40 HRC	Wear resistance	T3225	MJ	150 – 250	0.1- 0.25
	Stainless steels SUS304, etc.SUS304, etc. X5CrNi18-9, etc.	– 200 HB	First choice	AH3135	ML	100 – 200	0.1 – 0.3
		– 200 HB	Fracture resistance	AH3135	MJ	100 – 200	0.1 – 0.35
		– 200 HB	Wear resistance	T3225	MJ	100 – 250	0.1 – 0.3
	Grey cast irons FCD400, etc.FCD400, etc. 250, etc.	150 – 250 HB	First choice	T1215	MJ	100 – 300	0.1 – 0.35
		150 – 250 HB	Fracture resistance	AH120	MJ	100 – 250	0.1 – 0.4
	Ductile cast irons FCD400, etc.FCD400, etc. 400-15S, etc.	150 – 250 HB	First choice	T1215	MJ	100 – 300	0.1 – 0.35
		150 – 250 HB	Fracture resistance	AH120	MJ	80 – 200	0.1 – 0.4
	Aluminium alloys Si < 13%	–	First choice	KS05F	AJ	500 – 1500	0.1 – 0.5
	Aluminium alloys Si ≥ 13%	–	First choice	KS05F	AJ	150 – 500	0.1 – 0.5
	Titanium alloys Ti-6Al-4V, etc.	– 40 HRC	First choice	AH3135	ML	30 – 60	0.1 – 0.3
		– 40 HRC	Fracture resistance	AH3135	MJ	30 – 60	0.1 – 0.3
	Heat-resistant alloys Inconel 718, etc.	– 40 HRC	First choice	AH725	MJ	10 – 40	0.04 – 0.1
	Hardened materials SKD61, X40CrMoV5-1, etc.	– 45 HRC	First choice	AH8015	MJ	80 – 150	0.05 – 0.15
		– 45 HRC	Low cutting force	AH8015	ML	80 – 150	0.05 – 0.15

• Remove excessive chips with an air blast to prevent chip jamming.
• Use water-soluble coolant to avoid built-up edge in case extreme welding occurs on cutting edges. (ex. aluminium machining).
• For operations with a varied depth of cut (ex. casting skin) and machining of workpiece materials with interrupted surface, the feed (fz) should be set to the lower recommended value shown in the above table.
• Cutting conditions may be limited depending on machine power, workpiece rigidity,and spindle output. When the cutting width, depth or overhang length is large,
  set Vc and fz to the lower recommended values and check the machine power and vibration.