Solid carbide drills with 4 effective cutting edges for superior productivity
Four effective cutting edges for high drilling productivity
Applications & Features
Applications
Features
1. Optimized drill edge geometry allows smooth drill entry and stable drilling operations
2. Double feed of conventional two-flute drills
3. Four margins and a self-centering drill geometry enables high hole precision and quality
Drill bodies & Grades
Drill bodies
Main Grades
AH9130
- P15 – P35 / M25 – M35 / K10 – K25 / S15 – S30
- High wear resistance
- Designed for drilling various materials
Standard cutting conditions
| ISO | Workpiece material | Brinell hardness
(HB) |
Cutting speed
Vc (m/min) |
Feed: f (mm/rev) | |
|---|---|---|---|---|---|
| ø6 – ø9.9 | ø10 – ø16 | ||||
 |
Grey cast irons FC300, etc. 250, etc. |
– 200 | 60 – 120 | 0.2 – 0.8 | 0.3 -1.0 |
| Ductile cast irons FCD450, etc. 450-10S, etc. |
– 300 | 60 – 120 | 0.2 – 0.8 | 0.3 -1.0 | |
- The cutting parameters shown in the table are a starting guideline.
Values should be varied depending on the power or rigidity of the machine.
Optimum conditions should be selected depending on the actual chip control or damage on edges. - When using the smaller diameter tools in each range, set the feed “f” to the lower values.
- When drilling with a depth deeper than L/D = 3, a pecking cycle or dwell operation should be considered depending on the actual chip control.
For more information about this product, visit our online e-catalog or download the product
report:
e-Catalog
Imperial
Online shop |
|
Online shop Více informací |
Elektronický katalog nástrojů |
|
Elektronický katalog nástrojů Více informací |
Zdroje
Tungaloy APP
TUNG NaviDoporučení nástrojů pro vaše konkrétní potřeby
Machine Power Calculator
Turning Insert Selection Guide
MatrixSystém automatického výdeje nástrojů