SolidMeister

Powerful endmills with excellent performance

SolidMeister – our wide range of solid carbide endmills enhances your machining efficiency and stability in a broad spectrum of applications

Milling-Multi-Functional-Milling-Tools-SolidMeister-img-1

Applications & Features

Solid Carbide Endmills & Grades

Standard cutting conditions

VariableMeister

Slotting / Roughing (ae = 0.4 x D or over)

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)			ap (Slotting)
ISO	Workpiece material	Hardness	Vc (m/min)	ø6 – ø8	ø10 – ø12	ø16 – ø20	ap (Slotting)
	Carbon steel	– 300 HB	140 – 180	0.03 – 0.045	0.035 – 0.055	0.05 – 0.07	2xD
	Alloy steel	– 300 HB	70 – 150	0.025 – 0.04	0.035 – 0.055	0.05 – 0.07	2xD
	Stainless steel	– 200 HB	60 – 100	0.025 – 0.045	0.035 – 0.05	0.04 – 0.065	1xD
	Cast iron	150 – 200 HB	80 – 180	0.025 – 0.05	0.035 – 0.065	0.05 – 0.075	2xD
	Aluminium alloy	–	300 – 750	0.025 – 0.05	0.035 – 0.065	0.035 – 0.09	2xD
	Titanium alloy	– 40 HRC	20 – 50	0.025 – 0.04	0.03 – 0.05	0.035 – 0.085	1xD
	Hardened steel	– 60 HRC	20 – 30	0.01 – 0.02	0.02 – 0.04	0.03 – 0.06	0.5xD

Semi-finishing / Shouldering (ae = 0.1~0.4 x D)

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)			ap
ISO	Workpiece material	Hardness	Vc (m/min)	ø6 – ø8	ø10 – ø12	ø16 – ø20	ap
	Carbon steel	– 300 HB	150 – 220	0.035 – 0.075	0.075 – 0.09	0.085 – 0.1	2xD
	Alloy steel	– 300 HB	70 – 160	0.025 – 0.065	0.05 – 0.09	0.055 – 0.09	2xD
	Stainless steel	– 200 HB	80 – 130	0.03 – 0.05	0.04 – 0.06	0.05 – 0.065	2xD
	Cast iron	150 – 250 HB	130 – 220	0.035 – 0.065	0.05 – 0.075	0.075 – 0.09	2xD
	Aluminium alloy	–	350 – 850	0.05 – 0.075	0.075 – 0.1	0.075 – 0.1	2xD
	Titanium alloy	– 40 HRC	40 – 60	0.035 – 0.05	0.04 – 0.065	0.04 – 0.065	2xD
	Hardened steel	– 60 HRC	30 – 70	0.015 – 0.045	0.03 – 0.05	0.05 – 0.075	2xD

Finishing (feed rate depending on required accuracy) / High feed machining at low depth of cut (ae = 0.05~0.1 x D)

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)			ap
ISO	Workpiece material	Hardness	Vc (m/min)	ø6 – ø8	ø10 – ø12	ø16 – ø20	ap
	Carbon steel	– 300 HB	170 – 280	0.06 – 0.09	0.085 – 0.1	0.1 – 0.125	apmax
	Alloy steel	– 300 HB	110 – 220	0.06 – 0.09	0.085 – 0.1	0.1 – 0.125	apmax
	Stainless steel	– 200 HB	100 – 160	0.035 – 0.055	0.05 – 0.065	0.055 – 0.075	apmax
	Cast iron	150 – 250 HB	180 – 280	0.04 – 0.075	0.075 – 0.08	0.08 – 0.1	apmax
	Aluminium alloy	–	350 – 900	0.055 – 0.09	0.085 – 0.125	0.125 – 0.18	apmax
	Titanium alloy	– 40 HRC	50 – 70	0.04 – 0.065	0.05 – 0.075	0.075 – 0.11	apmax
	Hardened steel	– 60 HRC	40 – 80	0.025 – 0.05	0.04 – 0.065	0.06 – 0.08	apmax

· When the depth of cut (ae) is closer to the upper limit, please start with a lower limit value of cutting speed (Vc).
· Please set the cutting speed and the feed rate lower for the items with long slot according to how chattering occurs.
· While air blow is recommended, water-soluble coolant will be good for stainless steel, titanium alloy, and heat-resistant alloy.
· When chattering occurs with low rigid machines or settings, reduce cutting speed and feed at an equal rate.
· When chattering occurs with long tool overhang, reduce cutting speed and feed by 20 to 40%.

FinishMeister / ShredMeister

Slotting / Roughing (ae = 0.4 x D or over)

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)			ap (Slotting)
ISO	Workpiece material	Hardness	Vc (m/min)	ø6 – ø8	ø10 – ø12	ø16 – ø20	ap (Slotting)
	Carbon steel	– 300 HB	140 – 180	0.035 – 0.055	0.045 – 0.07	0.06 – 0.0825	2xD
	Alloy steel	– 300 HB	70 – 150	0.03 – 0.045	0.045 – 0.07	0.06 – 0.0825	2xD
	Stainless steel	– 200 HB	60 – 100	0.03 – 0.055	0.045 – 0.06	0.05 – 0.0675	1xD
	Cast iron	150 – 200 HB	80 – 180	0.03 – 0.06	0.045 – 0.08	0.06 – 0.09	2xD
	Aluminium alloy	–	300 – 750	0.03 – 0.06	0.045 – 0.08	0.04 – 0.105	2xD
	Titanium alloy	– 40 HRC	20 – 50	0.03 – 0.045	0.04 – 0.06	0.04 – 0.105	1xD
	Hardened steel	– 60 HRC	20 – 30	0.015 – 0.025	0.025 – 0.07	0.06 – 0.075	0.5xD

Semi-finishing / Shouldering (ae = 0.1~0.4 x D)

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)			ap
ISO	Workpiece material	Hardness	Vc (m/min)	ø6 – ø8	ø10 – ø12	ø16 – ø20	ap
	Carbon steel	– 300 HB	150 – 220	0.045 – 0.09	0.09 – 0.11	0.1 – 0.12	2xD
	Alloy steel	– 300 HB	70 – 160	0.03 – 0.075	0.06 – 0.1	0.065 – 0.105	2xD
	Stainless steel	– 200 HB	80 – 130	0.035 – 0.06	0.055 – 0.07	0.06 – 0.075	2xD
	Cast iron	150 – 250 HB	130 – 220	0.045 – 0.075	0.06 – 0.09	0.09 – 0.105	2xD
	Aluminium alloy	–	350 – 850	0.06 – 0.09	0.09 – 0.12	0.12 – 0.15	2xD
	Titanium alloy	– 40 HRC	40 – 60	0.045 – 0.06	0.055 – 0.07	0.075 – 0.12	2xD
	Hardened steel	– 60 HRC	30 – 70	0.02 – 0.055	0.045 – 0.07	0.06 – 0.09	2xD

Finishing (feed rate depending on required accuracy) / High feed machining at small width of cut (ae = 0.05~0.1 x D)

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)			ap
ISO	Workpiece material	Hardness	Vc (m/min)	ø6 – ø8	ø10 – ø12	ø16 – ø20	ap
	Carbon steel	– 300 HB	170 – 280	0.075 – 0.11	0.11 – 0.12	0.12 – 0.15	apmax
	Alloy steel	– 300 HB	110 – 220	0.075 – 0.11	0.11 – 0.12	0.12 – 0.15	apmax
	Stainless steel	– 200 HB	100 – 160	0.045 – 0.07	0.06 – 0.075	0.065 – 0.09	apmax
	Cast iron	150 – 250 HB	180 – 280	0.05 – 0.09	0.09 – 0.1	0.09 – 0.12	apmax
	Aluminium alloy	–	350 – 900	0.065 – 0.11	0.11 – 0.15	0.15 – 0.22	apmax
	Titanium alloy	– 40 HRC	50 – 70	0.055 – 0.075	0.06 – 0.09	0.09 – 0.12	apmax
	Hardened steel	– 60 HRC	40 – 80	0.03 – 0.06	0.05 – 0.09	0.075 – 0.105	apmax

· When the depth of cut (ae) is closer to the upper limit, please start with a lower limit value of cutting speed (Vc).
· While air blow is recommended, water-soluble coolant will be good for stainless steel, titanium alloy, and heat-resistant alloy.
· When chattering occurs with low rigid machines or settings, reduce cutting speed and feed at an equal rate.
· When chattering occurs with long tool overhang, reduce cutting speed and feed by 20 to 40%.

SolidMeister / EcoMeister

Slotting / Roughing

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)			ap (Slotting)
ISO	Workpiece material	Hardness	Vc (m/min)	ø6 – ø8	ø10 – ø12	ø16 – ø20	ap (Slotting)
	Carbon steel	– 300 HB	140 – 180	0.025 – 0.035	0.03 – 0.045	0.04 – 0.055	1xD
	Alloy steel	– 300 HB	70 – 150	0.02 – 0.03	0.03 – 0.045	0.04 – 0.055	1xD
	Stainless steel	– 200 HB	60 – 100	0.02 – 0.035	0.03 – 0.04	0.035 – 0.045	0.5xD
	Cast iron	150 – 200 HB	80 – 180	0.02 – 0.04	0.03 – 0.05	0.04 – 0.06	1xD
	Aluminium alloy	–	300 – 750	0.02 – 0.04	0.03 – 0.05	0.03 – 0.07	1xD
	Titanium alloy	– 40 HRC	20 – 50	0.02 – 0.03	0.02 – 0.03	0.03 – 0.07	0.25xD
	Hardened steel	– 60 HRC	20 – 30	0.01 – 0.015	0.02 – 0.045	0.04 – 0.05	0.2xD

Semi-finishing / Shouldering (ae = 0.1-0.4 x D)

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)			ap
ISO	Workpiece material	Hardness	Vc (m/min)	ø6 – ø8	ø10 – ø12	ø16 – ø20	ap
	Carbon steel	– 300 HB	150 – 220	0.03 – 0.06	0.06 – 0.07	0.07 – 0.08	2xD
	Alloy steel	– 300 HB	70 – 160	0.02 – 0.05	0.04 – 0.065	0.045 – 0.07	2xD
	Stainless steel	– 200 HB	80 – 130	0.025 – 0.04	0.035 – 0.045	0.04 – 0.05	2xD
	Cast iron	150 – 250 HB	130 – 220	0.03 – 0.05	0.04 – 0.06	0.06 – 0.07	2xD
	Aluminium alloy	–	350 – 850	0.04 – 0.06	0.06 – 0.08	0.08 – 0.1	2xD
	Titanium alloy	– 40 HRC	40 – 60	0.03 – 0.04	0.035 – 0.05	0.05 – 0.08	2xD
	Hardened steel	– 60 HRC	30 – 70	0.015 – 0.035	0.035 – 0.055	0.045 – 0.06	2xD

Finishing (feed rate depending on required accuracy) / High feed machining at low depth of cut (ae = 0.05-0.1 x D)

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)			ap
ISO	Workpiece material	Hardness	Vc (m/min)	ø6 – ø8	ø10 – ø12	ø16 – ø20	ap
	Carbon steel	– 300 HB	170 – 280	0.05 – 0.07	0.07 – 0.08	0.08 – 0.1	apmax
	Alloy steel	– 300 HB	110 – 220	0.05 – 0.07	0.07 – 0.08	0.08 – 0.1	apmax
	Stainless steel	– 200 HB	100 – 160	0.03 – 0.045	0.04 – 0.05	0.045 – 0.06	apmax
	Cast iron	150 – 250 HB	180 – 280	0.035 – 0.06	0.06 – 0.065	0.065 – 0.08	apmax
	Aluminium alloy	–	350 – 900	0.045 – 0.07	0.07 – 0.1	0.1 – 0.15	apmax
	Titanium alloy	– 40 HRC	50 – 70	0.035 – 0.05	0.04 – 0.06	0.06 – 0.085	apmax
	Hardened steel	– 60 HRC	40 – 80	0.02 – 0.04	0.04 – 0.06	0.05 – 0.07	apmax

· When the depth of cut (ae) is closer to the upper limit, please start with a lower limit value of cutting speed (Vc).
· The items with long slot (2xD or over) and the items with 5 cutting edges or more are not suitable for slotting operation.
· When using AH750, reducing cutting speed by 20 to 30% is effective for extending tool life.
· While air blow is recommended, water-soluble coolant will be good for stainless steel, titanium alloy, and heat-resistant alloy.
· When chattering occurs with low rigid machines or settings, reduce cutting speed and feed at an equal rate.
· When chattering occurs with long tool overhang, reduce cutting speed and feed by 20 to 40% (Variable/FinishMeister is recommended for such operations).
· In slotting of high hardened steel, heat-resistant alloy, and some types of stainless steel, start with ap=0.2xD and increase the value gradually while checking the status of
the operation.
· In shoulder milling of high hardened steel and heat-resistant alloy, the cutting width should be started at ae=0.05xD and increase the value gradually while checking the
status of the operation.
· The items with many cutting edges are good for finishing and high feed machining of small width of cut.
· VariableMeister is suitable for machining large depth of cut.
· Low feed in finishing is recommended for good surface roughness.

ball nose endmill

Shape machining (Roughing to semi-finishing)

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)			ap
ISO	Workpiece material	Hardness	Vc (m/min)	ø3 – ø6	ø8 – ø12	ø16 – ø20	ap
	Carbon steel	– 300 HB	125 – 200	0.02 – 0.055	0.04 – 0.08	0.06 – 0.11	0.05 – 0.12 x D
	Alloy steel	– 300 HB	100 – 150	0.01 – 0.035	0.03 – 0.05	0.045 – 0.06	0.04 – 0.1 x D
	Stainless steel	– 200 HB	110	0.015 – 0.03	0.03 – 0.04	0.05 – 0.06	0.05 – 0.1 x D
	Cast iron	150 – 250 HB	150 – 180	0.03 – 0.06	0.06 – 0.09	0.09 – 0.12	0.08 – 0.15 x D
	Titanium alloys	– 40 HRC	30 – 60	0.008 – 0.02	0.025 – 0.03	0.03 – 0.04	0.04 – 0.08 x D
	Heat-resistant alloys	– 40 HRC	20 – 30	0.008 – 0.02	0.025 – 0.03	0.03 – 0.04	0.04 – 0.08 x D
	Hardened steel	– 49 HRC	70 – 80	0.008 – 0.02	0.025 – 0.03	0.03 – 0.04	0.04 – 0.08 x D
	Hardened steel	50 – 60 HRC	30 – 40	0.005 – 0.008	0.007 – 0.013	0.009 – 0.02	0.03 – 0.06 x D

Finishing

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)			ap
ISO	Workpiece material	Hardness	Vc (m/min)	ø3 – ø6	ø8 – ø12	ø16 – ø20	ap
	Carbon steel	– 300 HB	170 – 280	0.017 – 0.046	0.034 – 0.068	0.051 – 0.094	0.02 x D
	Alloy steel	– 300 HB	120 – 165	0.008 – 0.03	0.025 – 0.043	0.038 – 0.051	0.01 x D
	Stainless steel	– 200 HB	150	0.012 – 0.026	0.025 – 0.034	0.042 – 0.051	0.01 x D
	Cast iron	150 – 250 HB	200 – 220	0.025 – 0.051	0.051 – 0.077	0.076 – 0.102	0.03 x D
	Titanium alloys	– 40 HRC	30 – 60	0.007 – 0.017	0.021 – 0.026	0.025 – 0.034	0.01 x D
	Heat-resistant alloys	– 40 HRC	20 – 30	0.007 – 0.017	0.021 – 0.026	0.025 – 0.034	0.01 x D
	Hardened steel	– 49 HRC	100	0.007 – 0.017	0.021 – 0.026	0.025 – 0.034	0.01 x D
	Hardened steel	50 – 60 HRC	40 – 50	0.004 – 0.007	0.006 – 0.011	0.007 – 0.017	0.01 x D

· When using AH750, reducing cutting speed by 20 to 30% is effective for extending tool life.
· While air blow is recommended, water-soluble coolant will be good for stainless steel, titanium alloy, and heat-resistant alloy.
· When chattering occurs with low rigid machines or settings, reduce cutting speed and feed at an equal rate.
· When chattering occurs with long tool overhang, reduce cutting speed and feed by 20 to 40% (VariableMeister is recommended for such operations).

High Feed Endmill

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)
	Carbon steel	– 300 HB	140 – 180	0.25 – 0.48	0.35 – 0.67	0.52 – 0.9
Alloy steel	– 300 HB	120 – 130	0.2 – 0.28	0.3 – 0.38	0.43 – 0.57
	Stainless steel	– 200 HB	120	0.25 – 0.3	0.35 – 0.43	0.52 – 0.6
	Cast iron	150 – 250 HB	160 – 180	0.3 – 0.45	0.45 – 0.6	0.6 – 0.8
	Hardened steel	– 49 HRC	100	0.16 – 0.2	0.25 – 0.33	0.4 – 0.48
Hardened steel	50 – 60 HRC	60 – 80	0.1 – 0.16	0.16 – 0.3	0.2 – 0.45

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)
	Cast iron	150 – 250 HB	250 – 1000	0.1 – 0.15	0.17 – 0.19	0.23 – 0.25
Ductile cast iron	150 – 250 HB	250 – 1000	0.1 – 0.15	0.17 – 0.19	0.23 – 0.25
Malleable cast iron	150 – 250 HB	250 – 1000	0.1 – 0.15	0.17 – 0.19	0.23 – 0.25
	Non-ferrous metal / Graphite	–	500 – 1500	0.1 – 0.15	0.17 – 0.19	0.23 – 0.25
	Nickel based alloy	–	250 – 1000	0.1 – 0.13	0.15 – 0.18	0.20 – 0.22

toroidal endmill

Semi-finishing / Shouldering (ae = 0.1-0.4 x D)

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)
ISO	Workpiece material	Hardness	Vc (m/min)	ø2	ø3	ø4	ø6
	Carbon steel	– 300 HB	150 – 220	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Alloy steel	– 300 HB	70 – 160	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Stainless steel	– 200 HB	80 – 130	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Cast iron	150 – 250 HB	130 – 220	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Aluminium alloy	–	350 – 850	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Titanium alloy	–	40 – 60	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Hardened steel	– 60 HRC	30 – 70	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07

Slotting / Roughing

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)
ISO	Workpiece material	Hardness	Vc (m/min)	ø2	ø3	ø4	ø6
	Carbon steel	– 300 HB	140 – 180	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Alloy steel	– 300 HB	70 – 150	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Stainless steel	– 200 HB	60 – 100	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Cast iron	150 – 200 HB	80 – 180	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Aluminium alloy	–	300 – 750	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Titanium alloy	–	20 – 50	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Hardened steel	– 60 HRC	20 – 30	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07

Finishing (feed rate depending on required accuracy) / High feed machining at low depth of cut (ae = 0.05-0.1 x D)

ISO	Workpiece material	Hardness	Vc (m/min)	fz (mm/t)
ISO	Workpiece material	Hardness	Vc (m/min)	ø2	ø3	ø4	ø6
	Carbon steel	– 300 HB	170 – 280	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Alloy steel	– 300 HB	110 – 220	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Stainless steel	– 200 HB	100 – 160	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Cast iron	150 – 250 HB	180 – 280	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Aluminium alloy	–	350 – 900	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Titanium alloy	–	50 – 70	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07
	Hardened steel	– 60 HRC	40 – 80	0.01 – 0.03	0.01 – 0.04	0.02 – 0.05	0.03 – 0.07

· When the depth of cut (ae) is closer to the upper limit, please start with a lower limit value of cutting speed (Vc).
· The items with long slot (2xD or over) is not suitable for slotting operation.
· While air blow is recommended, water-soluble coolant will be good for stainless steel, titanium alloy, and heat-resistant alloy.
· When chattering occurs with low rigid machines or settings, reduce cutting speed and feed at an equal rate.
· When chattering occurs with long tool overhang, reduce cutting speed and feed by 20 to 40%.
· In slotting of high hardened steel, heat-resistant alloy, and some types of stainless steel, start with ap=0.2xD and increase the value gradually while checking
the status of the operation.
· In shoulder milling of high hardened steel and heat-resistant alloy, the cutting width should be started at ae=0.05xD and increase the value gradually while
checking the status of the operation.
· Low feed in finishing is recommended for good surface roughness.

Barrel endmill

ISO	Workpiece materials	Hardness	Priority	Grade	Cutting speed Vc (m/min)	Feed per tooth: fz (mm/t)
	Low carbon steel SS400, S15C, etc. E275A, C15E4, etc., C15E, etc.	– 200 HB	First choice	AH710	210 – 300	0.04 – 0.08	0.05 – 0.1	0.06 – 0.12
Carbon steel, Alloy steel S55C, SCM440, etc. C55, 42CrMo4, etc.	– 300 HB	First choice	AH710	160 – 240	0.024 – 0.064	0.03 – 0.08	0.036 – 0.096
Prehardened steel PX5, NAK80, etc.	30 – 40 HRC	First choice	AH710	130 – 200	0.016 – 0.064	0.02 – 0.08	0.024 – 0.096
	Stainless steel SUS304, SUS316, etc. X5CrNi18-9, X5CrNiMo17-12-3, etc.	–	First choice	AH710	60 – 110	0.016 – 0.056	0.02 – 0.07	0.024 – 0.084
	Grey cast iron FC250, FC300, etc. 250, 300, etc., GG25, GG30, etc.	150 – 250 HB	First choice	AH710	150 – 275	0.04 – 0.08	0.05 – 0.1	0.06 – 0.12
Ductile cast iron FCD400, etc.	150 – 250 HB	First choice	AH710	150 – 200	0.04 – 0.08	0.05 – 0.1	0.06 – 0.12
	Titanium alloys Ti-6AI-4V, etc.	–	First choice	AH710	60 – 90	0.016 – 0.032	0.02 – 0.04	0.024 – 0.048
Heat-resistant alloys Inconel718, etc.	–	First choice	AH710	20 – 35	0.016 – 0.032	0.02 – 0.04	0.024 – 0.048
	Hard material	SKD61, etc. X40CrMoV5-1, etc.	40 – 50 HRC	First choice	AH710	40 – 80	0.008 – 0.024	0.01 – 0.03	0.012 – 0.036
SKD11, etc. X153CrMoV12, etc.	50 – 60 HRC	First choice	AH710	40 – 80	0.008 – 0.024	0.01 – 0.03	0.012 – 0.036

For more information about this product, visit our online e-catalog or download the product report:

e-Catalog

Metric

PDF

Metric

Main product report_No. 396-G

BACK

Industries

Industries
Tungaloy’s tooling solutions for a wide variety of components

Leer más

e-Catalog

e-Catalog
Descarga de dibujos en CAD y modelos tridimensionales

Workpiece materials		Hardness	Priority	Grade	Cutting speed Vc (m/min)	Feed per tooth: fz (mm/t)
						Tool diameter: DC (mm)
						8	10	12
Low carbon steel SS400, S15C, etc. E275A, C15E4, etc., C15E, etc.		– 200 HB	First choice	AH710	210 – 300	0.04 – 0.08	0.05 – 0.1	0.06 – 0.12
Carbon steel, Alloy steel S55C, SCM440, etc. C55, 42CrMo4, etc.		– 300 HB	First choice	AH710	160 – 240	0.024 – 0.064	0.03 – 0.08	0.036 – 0.096
Prehardened steel PX5, NAK80, etc.		30 – 40 HRC	First choice	AH710	130 – 200	0.016 – 0.064	0.02 – 0.08	0.024 – 0.096
Stainless steel SUS304, SUS316, etc. X5CrNi18-9, X5CrNiMo17-12-3, etc.		–	First choice	AH710	60 – 110	0.016 – 0.056	0.02 – 0.07	0.024 – 0.084
Grey cast iron FC250, FC300, etc. 250, 300, etc., GG25, GG30, etc.		150 – 250 HB	First choice	AH710	150 – 275	0.04 – 0.08	0.05 – 0.1	0.06 – 0.12
Ductile cast iron FCD400, etc.		150 – 250 HB	First choice	AH710	150 – 200	0.04 – 0.08	0.05 – 0.1	0.06 – 0.12
Titanium alloys Ti-6AI-4V, etc.		–	First choice	AH710	60 – 90	0.016 – 0.032	0.02 – 0.04	0.024 – 0.048
Heat-resistant alloys Inconel718, etc.		–	First choice	AH710	20 – 35	0.016 – 0.032	0.02 – 0.04	0.024 – 0.048
Hard material	SKD61, etc. X40CrMoV5-1, etc.	40 – 50 HRC	First choice	AH710	40 – 80	0.008 – 0.024	0.01 – 0.03	0.012 – 0.036
Hard material	SKD11, etc. X153CrMoV12, etc.	50 – 60 HRC	First choice	AH710	40 – 80	0.008 – 0.024	0.01 – 0.03	0.012 – 0.036

SolidMeister

Powerful endmills with excellent performance

Applications & Features

Applications

Features

Wide range of solid carbide endmills for various applications

Solid Carbide Endmills & Grades

Solid Carbide Endmills

FinishMeister

VariableMeister

FeedMeister

Main Grades

AH725

GH730

KS15F

Standard cutting conditions

VariableMeister

FinishMeister / ShredMeister

SolidMeister / EcoMeister

ball nose endmill

High Feed Endmill

toroidal endmill

Barrel endmill

e-Catalog

Metric

PDF

Metric

BuscarBuscar

Related News

Expansion of Small-Diameter End Mill SolidMiester Series for High-Hardness Materials

Acelerando las operaciones de acabado Tridimensional con los nuevos cortadores verticales tipo “Barril” de la línea SolidMeister.

Industries

Leer más

e-Catalog

Leer más

Recursos

SNS – Global

SNS – Tungaloy de Mexico S.A.