BuscarBuscar

TungBoreMini

Inicio / Productos / Turning / TungBoreMini
product_Turning_TungBoreMini

Multifunctional tool for drilling and turning

Multifunctional tool for improved productivity

Applications & Features

Applications

DrillingInternal turningExternal turning

Features

1. Minimum number of tools for maximum productivity

• A single TungBoreMini tool can handle multiple operations such as ID turning after drilling without exchanging the tools.
• Allows drilling and hole enlargement on various materials, instead of using a drill and turning tool.
• Can be used just like a standard ISO turning tool for ID, OD, and/or face turning application.

2. Reduced machine downtime

Multifunctional TungBoreMini eliminates tool changeover time, resulting in significantly reduced cycle time – this is especially effective in applications where individual processing time is short and quick, resulting in tremendous improvement in cycle time.

3. Features

Inserts & Grades

Inserts

TungBoreMini Inserts

  • Multifunctional tool for drilling and turning
Grades

AH725

  • P15 – P30 / M15 – M30 / K25 – K30 / S15 – S25
  • Good balance between wear and chipping resistance
  • Suitable for machining steel and stainless steel under general cutting conditions

Toolholders

External turning, Internal turning, Face turning, Hole-making

TungBoreMini Toolholders

Multifunctional tool for drilling and turning

Internal turning

TungBoreMini Toolholders

Screw-on boring bar, for XOMU rhombic inserts

Practical examples

Example #1

General Engineering

Part: Machine parts
Material: SUS440
Holder: TBM12R/LF16-2.25
Insert: XOMU06H204-PS
Grade: AH725
Cutting conditions: Vc = 80 (m/min)
f = 0.15 (mm/rev)
ap = 2.5 (mm)
Coolant: Wet
Example #2

General Engineering

Part: Machine parts
Material: SUS304 / X5CrNi18-9
Holder: TBM12R/LF16-2.25
Insert: XOMU06H204-PS
Grade: AH725
Cutting conditions: Vc = 100 (m/min)
f = Drilling: 0.03, Internal turning：0.1 – 0.15 (mm/rev)
ap = 0.5 (mm)
Coolant: Wet

Standard cutting conditions

Drilling
ISO Workpiece materials Cutting speed Vc (m/min) Minimum bore diameter: DMIN (mm)
ø8 ø10 ø12 ø14 ø16 ø18 ø20 ø25 ø32

Low carbon steel
Carbon steel		 50 – 180 0.02 – 0.05 0.02 – 0.05 0.02 – 0.07 0.01 – 0.075 0.01 – 0.08 0.05 – 0.13 0.05 – 0.13 0.05 – 0.14 0.05 – 0.14

Stainless steel 50 – 160 0.02 – 0.05 0.02 – 0.05 0.02 – 0.07 0.01 – 0.075 0.01 – 0.08 0.05 – 0.13 0.05 – 0.13 0.05 – 0.14 0.05 – 0.14

Cast iron 50 – 180 0.02 – 0.05 0.02 – 0.05 0.02 – 0.07 0.01 – 0.075 0.01 – 0.08 0.05 – 0.13 0.05 – 0.13 0.05 – 0.14 0.05 – 0.14

Aluminium alloys 100 – 300 0.02 – 0.05 0.02 – 0.05 0.02 – 0.07 0.01 – 0.075 0.01 – 0.08 0.05 – 0.13 0.05 – 0.13 0.05 – 0.14 0.05 – 0.14
Internal turning
ISO Workpiece materials Cutting speed Vc (m/min) Minimum bore diameter: DMIN (mm)
ø8 ø10 ø12 ø14 ø16 ø18 ø20 ø25 ø32
Depth of cut: ap (mm)

Low carbon steel
Carbon steel		 50 – 180 0.2 – 2.5 0.5 – 3 0.5 – 3.5 0.5 – 4.5 0.5 – 5 0.5 – 5.5 0.5 – 6 0.5 – 6.5 0.5 – 7
Feed: f (mm/rev)
0.02 – 0.12 0.05 – 0.2 0.05 – 0.2 0.05 – 0.2 0.05 – 0.2 0.1 – 0.3 0.1 – 0.3 0.1 – 0.3 0.1 – 0.4
ISO Workpiece materials Cutting speed Vc (m/min) Minimum bore diameter: DMIN (mm)
ø8 ø10 ø12 ø14 ø16 ø18 ø20 ø25 ø32
Depth of cut: ap (mm)

Stainless steel 50 – 160 0.2 – 2.5 0.5 – 3 0.5 – 3.5 0.5 – 4.5 0.5 – 5 0.5 – 5.5 0.5 – 6 0.5 – 6.5 0.5 – 7
Feed: f (mm/rev)
0.02 – 0.12 0.05 – 0.2 0.05 – 0.2 0.05 – 0.2 0.05 – 0.2 0.1 – 0.3 0.1 – 0.3 0.1 – 0.3 0.1 – 0.4
ISO Workpiece materials Cutting speed Vc (m/min) Minimum bore diameter: DMIN (mm)
ø8 ø10 ø12 ø14 ø16 ø18 ø20 ø25 ø32
Depth of cut: ap (mm)

Cast iron 50 – 180 0.2 – 2.5 0.5 – 3 0.5 – 3.5 0.5 – 4.5 0.5 – 5 0.5 – 5.5 0.5 – 6 0.5 – 6.5 0.5 – 7
Feed: f (mm/rev)
0.02 – 0.12 0.05 – 0.2 0.05 – 0.2 0.05 – 0.2 0.05 – 0.2 0.1 – 0.3 0.1 – 0.3 0.1 – 0.3 0.1 – 0.4
ISO Workpiece materials Cutting speed Vc (m/min) Minimum bore diameter: DMIN (mm)
ø8 ø10 ø12 ø14 ø16 ø18 ø20 ø25 ø32
Depth of cut: ap (mm)

Aluminium alloys 100 – 300 0.2 – 2.5 0.5 – 3 0.5 – 3.5 0.5 – 4.5 0.5 – 5 0.5 – 5.5 0.5 – 6 0.5 – 6.5 0.5 – 7
Feed: f (mm/rev)
0.02 – 0.12 0.05 – 0.2 0.05 – 0.2 0.05 – 0.2 0.05 – 0.2 0.1 – 0.3 0.1 – 0.3 0.1 – 0.3 0.1 – 0.4

For more information about this product, visit our online e-catalog or download the product report:

e-Catalog

Metric  |  Imperial

PDF
Industries

Industries

Industries
Tungaloy’s tooling solutions for a wide variety of components

Leer más
e-Catalog

e-Catalog

e-Catalog
Descarga de dibujos en CAD y modelos tridimensionales

Leer más
Recursos