Buscar

SolidMeister

Inicio / Productos / Milling / SolidMeister
product_Milling_SolidMeister

Potentes fresas con excelente rendimiento

SolidMeister: nuestra amplia gama de fresas de metal duro mejora la eficiencia y la estabilidad de su mecanizado en una amplia gama de aplicaciones

Aplicaciones y características

Aplicaciones

Shoulder millingShoulder milling RSlottingSlotting RPocketingRampingProfilingPlungingSide slottingFace millingHole enlarging

Características

Amplia gama de fresas de metal duro para diversas aplicaciones

Fresas de metal duro y calidades

Fresas de metal duro

FinishMeister

  • Combinación de aristas de desbaste y aristas de acabado
  • Operaciones de desbaste y acabado al mismo tiempo

VariableMeister

  • Configuración de paso variable
  • Excelente capacidad de amortiguación de vibraciones

FeedMeister

  • Para aplicaciones a alto avance
  • Lo último en herramientas de cerámica
Calidades principales

AH725

  • Buen equilibrio entre la resistencia al desgaste y  al astillado.
  • Adecuada para el mecanizado de acero y acero inoxidable en condiciones de corte estándar

GH730

  • Gran resistencia al desgaste
  • Adecuada para torneado y ranurado a bajas velocidades

KS15F

Condiciones de corte estándar

VariableMeister
Slotting / Roughing (ae = 0.4 x D or over)
ISO Workpiece material Hardness Vc (m/min) fz (mm/t) ap
(Slotting)
ø6 – ø8 ø10 – ø12 ø16 – ø20
Carbon steel – 300 HB 140 – 180 0.03 – 0.045 0.035 – 0.055 0.05 – 0.07 2xD
Alloy steel – 300 HB 70 – 150 0.025 – 0.04 0.035 – 0.055 0.05 – 0.07 2xD
Stainless steel – 200 HB 60 – 100 0.025 – 0.045 0.035 – 0.05 0.04 – 0.065 1xD
Cast iron 150 – 200 HB 80 – 180 0.025 – 0.05 0.035 – 0.065 0.05 – 0.075 2xD
Aluminium alloy – 300 – 750 0.025 – 0.05 0.035 – 0.065 0.035 – 0.09 2xD
Titanium alloy – 40 HRC 20 – 50 0.025 – 0.04 0.03 – 0.05 0.035 – 0.085 1xD
Hardened steel – 60 HRC 20 – 30 0.01 – 0.02 0.02 – 0.04 0.03 – 0.06 0.5xD
Semi-finishing / Shouldering (ae = 0.1~0.4 x D)
ISO Workpiece material Hardness Vc (m/min) fz (mm/t) ap
ø6 – ø8 ø10 – ø12 ø16 – ø20
Carbon steel – 300 HB 150 – 220 0.035 – 0.075 0.075 – 0.09 0.085 – 0.1 2xD
Alloy steel – 300 HB 70 – 160 0.025 – 0.065 0.05 – 0.09 0.055 – 0.09 2xD
Stainless steel – 200 HB 80 – 130 0.03 – 0.05 0.04 – 0.06 0.05 – 0.065 2xD
Cast iron 150 – 250 HB 130 – 220 0.035 – 0.065 0.05 – 0.075 0.075 – 0.09 2xD
Aluminium alloy – 350 – 850 0.05 – 0.075 0.075 – 0.1 0.075 – 0.1 2xD
Titanium alloy – 40 HRC 40 – 60 0.035 – 0.05 0.04 – 0.065 0.04 – 0.065 2xD
Hardened steel – 60 HRC 30 – 70 0.015 – 0.045 0.03 – 0.05 0.05 – 0.075 2xD
Finishing (feed rate depending on required accuracy) / High feed machining at low depth of cut (ae = 0.05~0.1 x D)
ISO Workpiece material Hardness Vc (m/min) fz (mm/t) ap
ø6 – ø8 ø10 – ø12 ø16 – ø20
Carbon steel – 300 HB 170 – 280 0.06 – 0.09 0.085 – 0.1 0.1 – 0.125 apmax
Alloy steel – 300 HB 110 – 220 0.06 – 0.09 0.085 – 0.1 0.1 – 0.125 apmax
Stainless steel – 200 HB 100 – 160 0.035 – 0.055 0.05 – 0.065 0.055 – 0.075 apmax
Cast iron 150 – 250 HB 180 – 280 0.04 – 0.075 0.075 – 0.08 0.08 – 0.1 apmax
Aluminium alloy – 350 – 900 0.055 – 0.09 0.085 – 0.125 0.125 – 0.18 apmax
Titanium alloy – 40 HRC 50 – 70 0.04 – 0.065 0.05 – 0.075 0.075 – 0.11 apmax
Hardened steel – 60 HRC 40 – 80 0.025 – 0.05 0.04 – 0.065 0.06 – 0.08 apmax

· When the depth of cut (ae) is closer to the upper limit, please start with a lower limit value of cutting speed (Vc).
· Please set the cutting speed and the feed rate lower for the items with long slot according to how chattering occurs.
· While air blow is recommended, water-soluble coolant will be good for stainless steel, titanium alloy, and heat-resistant alloy.
· When chattering occurs with low rigid machines or settings, reduce cutting speed and feed at an equal rate.
· When chattering occurs with long tool overhang, reduce cutting speed and feed by 20 to 40%.

FinishMeister / ShredMeister
Slotting / Roughing (ae = 0.4 x D or over)
ISO Workpiece material Hardness Vc (m/min) fz (mm/t) ap
(Slotting)
ø6 – ø8 ø10 – ø12 ø16 – ø20
Carbon steel – 300 HB 140 – 180 0.035 – 0.055 0.045 – 0.07 0.06 – 0.0825 2xD
Alloy steel – 300 HB 70 – 150 0.03 – 0.045 0.045 – 0.07 0.06 – 0.0825 2xD
Stainless steel – 200 HB 60 – 100 0.03 – 0.055 0.045 – 0.06 0.05 – 0.0675 1xD
Cast iron 150 – 200 HB 80 – 180 0.03 – 0.06 0.045 – 0.08 0.06 – 0.09 2xD
Aluminium alloy – 300 – 750 0.03 – 0.06 0.045 – 0.08 0.04 – 0.105 2xD
Titanium alloy – 40 HRC 20 – 50 0.03 – 0.045 0.04 – 0.06 0.04 – 0.105 1xD
Hardened steel – 60 HRC 20 – 30 0.015 – 0.025 0.025 – 0.07 0.06 – 0.075 0.5xD
Semi-finishing / Shouldering (ae = 0.1~0.4 x D)
ISO Workpiece material Hardness Vc (m/min) fz (mm/t) ap
ø6 – ø8 ø10 – ø12 ø16 – ø20
Carbon steel – 300 HB 150 – 220 0.045 – 0.09 0.09 – 0.11 0.1 – 0.12 2xD
Alloy steel – 300 HB 70 – 160 0.03 – 0.075 0.06 – 0.1 0.065 – 0.105 2xD
Stainless steel – 200 HB 80 – 130 0.035 – 0.06 0.055 – 0.07 0.06 – 0.075 2xD
Cast iron 150 – 250 HB 130 – 220 0.045 – 0.075 0.06 – 0.09 0.09 – 0.105 2xD
Aluminium alloy – 350 – 850 0.06 – 0.09 0.09 – 0.12 0.12 – 0.15 2xD
Titanium alloy – 40 HRC 40 – 60 0.045 – 0.06 0.055 – 0.07 0.075 – 0.12 2xD
Hardened steel – 60 HRC 30 – 70 0.02 – 0.055 0.045 – 0.07 0.06 – 0.09 2xD
Finishing (feed rate depending on required accuracy) / High feed machining at small width of cut (ae = 0.05~0.1 x D)
ISO Workpiece material Hardness Vc (m/min) fz (mm/t) ap
ø6 – ø8 ø10 – ø12 ø16 – ø20
Carbon steel – 300 HB 170 – 280 0.075 – 0.11 0.11 – 0.12 0.12 – 0.15 apmax
Alloy steel – 300 HB 110 – 220 0.075 – 0.11 0.11 – 0.12 0.12 – 0.15 apmax
Stainless steel – 200 HB 100 – 160 0.045 – 0.07 0.06 – 0.075 0.065 – 0.09 apmax
Cast iron 150 – 250 HB 180 – 280 0.05 – 0.09 0.09 – 0.1 0.09 – 0.12 apmax
Aluminium alloy – 350 – 900 0.065 – 0.11 0.11 – 0.15 0.15 – 0.22 apmax
Titanium alloy – 40 HRC 50 – 70 0.055 – 0.075 0.06 – 0.09 0.09 – 0.12 apmax
Hardened steel – 60 HRC 40 – 80 0.03 – 0.06 0.05 – 0.09 0.075 – 0.105 apmax

· When the depth of cut (ae) is closer to the upper limit, please start with a lower limit value of cutting speed (Vc).
· While air blow is recommended, water-soluble coolant will be good for stainless steel, titanium alloy, and heat-resistant alloy.
· When chattering occurs with low rigid machines or settings, reduce cutting speed and feed at an equal rate.
· When chattering occurs with long tool overhang, reduce cutting speed and feed by 20 to 40%.

SolidMeister / EcoMeister
Slotting / Roughing
ISO Workpiece material Hardness Vc (m/min) fz (mm/t) ap
(Slotting)
ø6 – ø8 ø10 – ø12 ø16 – ø20
Carbon steel – 300 HB 140 – 180 0.025 – 0.035 0.03 – 0.045 0.04 – 0.055 1xD
Alloy steel – 300 HB 70 – 150 0.02 – 0.03 0.03 – 0.045 0.04 – 0.055 1xD
Stainless steel – 200 HB 60 – 100 0.02 – 0.035 0.03 – 0.04 0.035 – 0.045 0.5xD
Cast iron 150 – 200 HB 80 – 180 0.02 – 0.04 0.03 – 0.05 0.04 – 0.06 1xD
Aluminium alloy – 300 – 750 0.02 – 0.04 0.03 – 0.05 0.03 – 0.07 1xD
Titanium alloy – 40 HRC 20 – 50 0.02 – 0.03 0.02 – 0.03 0.03 – 0.07 0.25xD
Hardened steel – 60 HRC 20 – 30 0.01 – 0.015 0.02 – 0.045 0.04 – 0.05 0.2xD
Semi-finishing / Shouldering (ae = 0.1-0.4 x D)
ISO Workpiece material Hardness Vc (m/min) fz (mm/t) ap
ø6 – ø8 ø10 – ø12 ø16 – ø20
Carbon steel – 300 HB 150 – 220 0.03 – 0.06 0.06 – 0.07 0.07 – 0.08 2xD
Alloy steel – 300 HB 70 – 160 0.02 – 0.05 0.04 – 0.065 0.045 – 0.07 2xD
Stainless steel – 200 HB 80 – 130 0.025 – 0.04 0.035 – 0.045 0.04 – 0.05 2xD
Cast iron 150 – 250 HB 130 – 220 0.03 – 0.05 0.04 – 0.06 0.06 – 0.07 2xD
Aluminium alloy – 350 – 850 0.04 – 0.06 0.06 – 0.08 0.08 – 0.1 2xD
Titanium alloy – 40 HRC 40 – 60 0.03 – 0.04 0.035 – 0.05 0.05 – 0.08 2xD
Hardened steel – 60 HRC 30 – 70 0.015 – 0.035 0.035 – 0.055 0.045 – 0.06 2xD
Finishing (feed rate depending on required accuracy) / High feed machining at low depth of cut (ae = 0.05-0.1 x D)
ISO Workpiece material Hardness Vc (m/min) fz (mm/t) ap
ø6 – ø8 ø10 – ø12 ø16 – ø20
Carbon steel – 300 HB 170 – 280 0.05 – 0.07 0.07 – 0.08 0.08 – 0.1 apmax
Alloy steel – 300 HB 110 – 220 0.05 – 0.07 0.07 – 0.08 0.08 – 0.1 apmax
Stainless steel – 200 HB 100 – 160 0.03 – 0.045 0.04 – 0.05 0.045 – 0.06 apmax
Cast iron 150 – 250 HB 180 – 280 0.035 – 0.06 0.06 – 0.065 0.065 – 0.08 apmax
Aluminium alloy – 350 – 900 0.045 – 0.07 0.07 – 0.1 0.1 – 0.15 apmax
Titanium alloy – 40 HRC 50 – 70 0.035 – 0.05 0.04 – 0.06 0.06 – 0.085 apmax
Hardened steel – 60 HRC 40 – 80 0.02 – 0.04 0.04 – 0.06 0.05 – 0.07 apmax

· When the depth of cut (ae) is closer to the upper limit, please start with a lower limit value of cutting speed (Vc).
· The items with long slot (2xD or over) and the items with 5 cutting edges or more are not suitable for slotting operation.
· When using AH750, reducing cutting speed by 20 to 30% is effective for extending tool life.
· While air blow is recommended, water-soluble coolant will be good for stainless steel, titanium alloy, and heat-resistant alloy.
· When chattering occurs with low rigid machines or settings, reduce cutting speed and feed at an equal rate.
· When chattering occurs with long tool overhang, reduce cutting speed and feed by 20 to 40% (Variable/FinishMeister is recommended for such operations).
· In slotting of high hardened steel, heat-resistant alloy, and some types of stainless steel, start with ap=0.2xD and increase the value gradually while checking the status of
the operation.
· In shoulder milling of high hardened steel and heat-resistant alloy, the cutting width should be started at ae=0.05xD and increase the value gradually while checking the
status of the operation.
· The items with many cutting edges are good for finishing and high feed machining of small width of cut.
· VariableMeister is suitable for machining large depth of cut.
· Low feed in finishing is recommended for good surface roughness.

Ball Nose Endmill
Shape machining (Roughing to semi-finishing)
ISO Workpiece material Hardness Vc (m/min) fz (mm/t) ap
ø3 – ø6 ø8 – ø12 ø16 – ø20
Carbon steel – 300 HB 125 – 200 0.02 – 0.055 0.04 – 0.08 0.06 – 0.11 0.05 – 0.12 x D
Alloy steel – 300 HB 100 – 150 0.01 – 0.035 0.03 – 0.05 0.045 – 0.06 0.04 – 0.1 x D
Stainless steel – 200 HB 110 0.015 – 0.03 0.03 – 0.04 0.05 – 0.06 0.05 – 0.1 x D
Cast iron 150 – 250 HB 150 – 180 0.03 – 0.06 0.06 – 0.09 0.09 – 0.12 0.08 – 0.15 x D
Titanium alloys – 40 HRC 30 – 60 0.008 – 0.02 0.025 – 0.03 0.03 – 0.04 0.04 – 0.08 x D
Heat-resistant alloys – 40 HRC 20 – 30 0.008 – 0.02 0.025 – 0.03 0.03 – 0.04 0.04 – 0.08 x D
Hardened steel – 49 HRC 70 – 80 0.008 – 0.02 0.025 – 0.03 0.03 – 0.04 0.04 – 0.08 x D
Hardened steel 50 – 60 HRC 30 – 40 0.005 – 0.008 0.007 – 0.013 0.009 – 0.02 0.03 – 0.06 x D
Finishing
ISO Workpiece material Hardness Vc (m/min) fz (mm/t) ap
ø3 – ø6 ø8 – ø12 ø16 – ø20
Carbon steel – 300 HB 170 – 280 0.017 – 0.046 0.034 – 0.068 0.051 – 0.094 0.02 x D
Alloy steel – 300 HB 120 – 165 0.008 – 0.03 0.025 – 0.043 0.038 – 0.051 0.01 x D
Stainless steel – 200 HB 150 0.012 – 0.026 0.025 – 0.034 0.042 – 0.051 0.01 x D
Cast iron 150 – 250 HB 200 – 220 0.025 – 0.051 0.051 – 0.077 0.076 – 0.102 0.03 x D
Titanium alloys – 40 HRC 30 – 60 0.007 – 0.017 0.021 – 0.026 0.025 – 0.034 0.01 x D
Heat-resistant alloys – 40 HRC 20 – 30 0.007 – 0.017 0.021 – 0.026 0.025 – 0.034 0.01 x D
Hardened steel – 49 HRC 100 0.007 – 0.017 0.021 – 0.026 0.025 – 0.034 0.01 x D
Hardened steel 50 – 60 HRC 40 – 50 0.004 – 0.007 0.006 – 0.011 0.007 – 0.017 0.01 x D

· When using AH750, reducing cutting speed by 20 to 30% is effective for extending tool life.
· While air blow is recommended, water-soluble coolant will be good for stainless steel, titanium alloy, and heat-resistant alloy.
· When chattering occurs with low rigid machines or settings, reduce cutting speed and feed at an equal rate.
· When chattering occurs with long tool overhang, reduce cutting speed and feed by 20 to 40% (VariableMeister is recommended for such operations).

High Feed Endmill
Shape machining (roughing) TEFF**N4…
ISO Workpiece material Hardness Vc (m/min) fz (mm/t)
ø6 – ø8 ø10 – ø12 ø16 – ø20
Carbon steel – 300 HB 140 – 180 0.25 – 0.48 0.35 – 0.67 0.52 – 0.9
Alloy steel – 300 HB 120 – 130 0.2 – 0.28 0.3 – 0.38 0.43 – 0.57
Stainless steel – 200 HB 120 0.25 – 0.3 0.35 – 0.43 0.52 – 0.6
Cast iron 150 – 250 HB 160 – 180 0.3 – 0.45 0.45 – 0.6 0.6 – 0.8
Hardened steel – 49 HRC 100 0.16 – 0.2 0.25 – 0.33 0.4 – 0.48
Hardened steel 50 – 60 HRC 60 – 80 0.1 – 0.16 0.16 – 0.3 0.2 – 0.45
Shape machining (roughing) TCFF**A3…
ISO Workpiece material Hardness Vc (m/min) fz (mm/t)
ø6 – ø8 ø10 – ø12 ø16 – ø20
Cast iron 150 – 250 HB 250 – 1000 0.1 – 0.15 0.17 – 0.19 0.23 – 0.25
Ductile cast iron 150 – 250 HB 250 – 1000 0.1 – 0.15 0.17 – 0.19 0.23 – 0.25
Malleable cast iron 150 – 250 HB 250 – 1000 0.1 – 0.15 0.17 – 0.19 0.23 – 0.25
Non-ferrous metal / Graphite – 500 – 1500 0.1 – 0.15 0.17 – 0.19 0.23 – 0.25
Nickel based alloy – 250 – 1000 0.1 – 0.13 0.15 – 0.18 0.20 – 0.22

High speed machining generates heat in the tool and chuck holder.
Thermal expansion of the holder will often lead to tool damage. Use an air coolant during machining to cool the tool holder.
Milling chucks are recommended for the toolholder to be used.
*Use the above corner radius values (RE) for programming.

toroidal endmill
Semi-finishing / Shouldering (ae = 0.1-0.4 x D)
ISO Workpiece material Hardness Vc (m/min) fz (mm/t)
ø2 ø3 ø4 ø6
Carbon steel – 300 HB 150 – 220 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Alloy steel – 300 HB 70 – 160 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Stainless steel – 200 HB 80 – 130 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Cast iron 150 – 250 HB 130 – 220 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Aluminium alloy – 350 – 850 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Titanium alloy – 40 – 60 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Hardened steel – 60 HRC 30 – 70 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Slotting / Roughing
ISO Workpiece material Hardness Vc (m/min) fz (mm/t)
ø2 ø3 ø4 ø6
Carbon steel – 300 HB 140 – 180 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Alloy steel – 300 HB 70 – 150 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Stainless steel – 200 HB 60 – 100 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Cast iron 150 – 200 HB 80 – 180 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Aluminium alloy – 300 – 750 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Titanium alloy – 20 – 50 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Hardened steel – 60 HRC 20 – 30 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Finishing (feed rate depending on required accuracy) / High feed machining at low depth of cut (ae = 0.05-0.1 x D)
ISO Workpiece material Hardness Vc (m/min) fz (mm/t)
ø2 ø3 ø4 ø6
Carbon steel – 300 HB 170 – 280 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Alloy steel – 300 HB 110 – 220 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Stainless steel – 200 HB 100 – 160 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Cast iron 150 – 250 HB 180 – 280 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Aluminium alloy – 350 – 900 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Titanium alloy – 50 – 70 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07
Hardened steel – 60 HRC 40 – 80 0.01 – 0.03 0.01 – 0.04 0.02 – 0.05 0.03 – 0.07

· When the depth of cut (ae) is closer to the upper limit, please start with a lower limit value of cutting speed (Vc).
· The items with long slot (2xD or over) is not suitable for slotting operation.
· While air blow is recommended, water-soluble coolant will be good for stainless steel, titanium alloy, and heat-resistant alloy.
· When chattering occurs with low rigid machines or settings, reduce cutting speed and feed at an equal rate.
· When chattering occurs with long tool overhang, reduce cutting speed and feed by 20 to 40%.
· In slotting of high hardened steel, heat-resistant alloy, and some types of stainless steel, start with ap=0.2xD and increase the value gradually while checking
the status of the operation.
· In shoulder milling of high hardened steel and heat-resistant alloy, the cutting width should be started at ae=0.05xD and increase the value gradually while
checking the status of the operation.
· Low feed in finishing is recommended for good surface roughness.

Barrel endmill
ISO Workpiece materials Hardness Priority Grade Cutting speed Vc (m/min) Feed per tooth:
fz (mm/t)
Tool diameter:
DC (mm)
8 10 12
Low carbon steel
SS400, S15C, etc.
E275A, C15E4, etc., C15E, etc.		 – 200 HB First choice AH710 210 – 300 0.04 – 0.08 0.05 – 0.1 0.06 – 0.12
Carbon steel, Alloy steel
S55C, SCM440, etc.
C55, 42CrMo4, etc.		 – 300 HB First choice AH710 160 – 240 0.024 – 0.064 0.03 – 0.08 0.036 – 0.096
Prehardened steel
PX5, NAK80, etc.		 30 – 40 HRC First choice AH710 130 – 200 0.016 – 0.064 0.02 – 0.08 0.024 – 0.096
Stainless steel
SUS304, SUS316, etc.
X5CrNi18-9, X5CrNiMo17-12-3, etc.		 – First choice AH710 60 – 110 0.016 – 0.056 0.02 – 0.07 0.024 – 0.084
Grey cast iron
FC250, FC300, etc.
250, 300, etc., GG25, GG30, etc.		 150 – 250 HB First choice AH710 150 – 275 0.04 – 0.08 0.05 – 0.1 0.06 – 0.12
Ductile cast iron
FCD400, etc.		 150 – 250 HB First choice AH710 150 – 200 0.04 – 0.08 0.05 – 0.1 0.06 – 0.12
Titanium alloys
Ti-6AI-4V, etc.		 – First choice AH710 60 – 90 0.016 – 0.032 0.02 – 0.04 0.024 – 0.048
Heat-resistant alloys
Inconel718, etc.		 – First choice AH710 20 – 35 0.016 – 0.032 0.02 – 0.04 0.024 – 0.048
Hard material SKD61, etc.
X40CrMoV5-1, etc.		 40 – 50 HRC First choice AH710 40 – 80 0.008 – 0.024 0.01 – 0.03 0.012 – 0.036
SKD11, etc.
X153CrMoV12, etc.		 50 – 60 HRC First choice AH710 40 – 80 0.008 – 0.024 0.01 – 0.03 0.012 – 0.036

Para obtener más información sobre este producto, visite nuestro catálogo en línea o descargue el informe del producto:

e-Catalog
PDF
Industries

Industrias

Industrias
Las soluciones de herramientas de Tungaloy para una amplia variedad de componentes.

Más información
e-Catalog

e-Catalog

Catalogo Electronico
Descarga dibujos CAD y modelos 3D

Más información
Recursos