DoOcto

product_Milling_DoOcto

Ideal for steel and cast iron face milling

A single cutter body with 4 insert options broadens its application range

Applications & Features

Face millingCoolant hole

1. Inserts are available in single-sided or double-sided geometry

  • ONMU / ONHU: Double-sided, octagonal inserts (economy)
  • SNMU / SNHU: Double-sided, square inserts (large cutting depths)
  • OWMT: Single-sided, octagonal insert (with low cutting load, high feed rates)

2. Enhanced cutter body lineup

• Including cutter diameters of >ø315 mm or extra close pitched design for effective cast iron milling.

 



For general purpose
Optimized orientation of coolant outlet which is located in a large chip gullet facilitates smooth chip evacuation. Large clamping screw enhances insert security.
Cutter diameters: ø80 mm – ø315 mm



For efficient cast iron milling
Offers twice as much insert density as a screw clamping style cutter with easy indexability.
Cutter diameters: ø80 mm – ø160 mm

Inserts & Grades

Inserts

ONHU07-W

  • Wiper insert with 8 cutting edges for ONMU/ONHU inserts

ON*U07-MJ / -ML

  • Economical Double sided octagonal insert, 16 corners available

OWMT08-HJ

  • Octagonal Milling Inserts with Positive Rake and HJ chipbreaker, 8 corners available

OWMT08-ML

  • Octagonal Milling Inserts with Positive Rake and ML chipbreaker, 8 corners available

SNHU17-W

  • Double sided wiper insert with 2 cutting edges in using with SNMU/SNHU insert

SN*U17-MJ / -ML

  • Double sided square inserts with large depth of cut
Main Grades

AH3135

  • High fracture resistance
  • Suitable for machining steel and stainless steel under general cutting conditions

T3225

  • High chipping and fracture resistance
  • Suitable for milling steel and stainless steel

AH120

  • Good balance between wear and fracture resistance
  • Suitable for machining steel, stainless steel, and cast iron under general cutting conditions

Cutter bodies

Bore Type

TAN07 (ø63 – ø315mm)

45deg screw clamp type face mills with double sided octagonal or square inserts

Bore Type

TAN07-W (ø63 – ø200mm)

45deg wedge clamp type face mills with double sided octagonal or square inserts

Practical examples

Part: Cylinder block
Material: FC250
Cutter: TAN07R160M50.8-15 (ø160 mm, z = 15)
Insert: ONHU0705ANTN-ML
Grade: AH120
Cutting conditions: Vc = 180 (m/min)
fz = 0.18 → 0.2 (mm/t)
Vf = 780 → 1080 (mm/min)
ap = 3 (mm)
ae = 100 (mm)
Application: Face milling
Coolant: Dry
Machine: Vertical M/C, BT50
Part: Crank shaft
Material: SCM435 / 34CrMo4
Cutter: TAN07R100M31.7-07 (ø100 mm, z = 7)
Insert: ONMU0705ANPN-ML
Grade: AH3135
Cutting conditions: Vc = 80 (m/min)
fz = 0.18 (mm/t)
Vf = 320 (mm/min)
ap = 3 (mm)
ae = 75 (mm)
Application: Face milling
Coolant: Wet
Machine: Specialized machine
Part: Elbow
Material: SCS10 / 25Cr5NiMoN
Cutter: TAN07R200M47.6-12 (ø200 mm, z = 12)
Insert: OWMT0807AAER-ML
Grade: AH3135
Cutting conditions: Vc = 70 (m/min)
fz = 0.2 (mm/t)
Vf = 267 (mm/min)
ap = 1 (mm)
ae = 180 (mm)
Application: Face milling
Coolant: Wet
Machine: Horizontal M/C, BT50

Standard cutting conditions

For more information about this product, visit our online e-catalog or download the product report:

Industries

Industries

Industries
Tungaloy’s tooling solutions for a wide variety of components

Learn more

e-Catalog

e-Catalog

e-Catalog
Download CAD drawings and 3D models

Learn more

Resources