SolidMeister

product_Milling_SolidMeister

Powerful endmills with excellent performance

SolidMeister – our wide range of solid carbide endmills enhances your machining efficiency and stability in a broad spectrum of applications

Applications & Features

Shoulder millingShoulder milling RSlottingSlotting RPocketingRampingProfilingPlungingSide slottingFace millingHole enlarging

Wide range of solid carbide endmills for various applications

Solid Carbide Endmills & Grades

Solid Carbide Endmills

FinishMeister

  • Combination of roughing edges and finishing edges
  • Roughing and finishing operations at the same time

VariableMeister

  • Variable pitch configuration
  • Excellent chatter dampening ability

FeedMeister

  • For high feed milling
  • Line up of the latest solid ceramic tools
Main Grades

AH725

  • Good balance between wear and chipping resistance
  • Suitable for machining steel and stainless steel under general cutting conditions

GH730

  • High wear resistance
  • Suitable for turning and grooving at low speed

KS15F

Standard cutting conditions

Rougher endmills
ISO Material Condition Tensile Strength
(N/mm2)
Hardness
(HB)
Cutting speed Vc (m/min)
min max
Non-alloy steel and cast steel,
free cutting steel
< 0.25 %C Annealed 420 125 260 280
≥ 0.25 %C Annealed 650 190 200 230
< 0.55 %C Quenched and tempered 850 250 160 190
≥ 0.55 %C Annealed 750 220 160 180
≥ 0.55 %C Quenched and tempered 1000 300 140 160
Low alloy steel and cast steel
(less than 5% all elements)
Annealed 600 200 160 190
Quenched and tempered 930 275 120 140
Quenched and tempered 1000 300 130 150
Quenched and tempered 1200 350 140 160
High alloy steel, cast steel,
and tool steel
Annealed 680 200 130 160
Quenched and tempered 1100 325 70 90
Stainless steel and cast steel Ferritic / martensitic 680 200 110 200
Martensitic 820 240 60 180
Austenitic 600 180 80 120
Grey cast iron (GG) Ferritic / pearlitic 180 80 260
Pearlitic 260 130 240
Nodular cast iron (GGG) Ferritic 160 150 280
Pearlitic 250 90 280
Malleable cast iron Ferritic 130 150 280
Pearlitic 230 140 240
Aluminium-wrought alloy Not cureable 60 810 840
Cured 100 730 830
Aluminium-cast, alloyed ≤ 12% Si Not cureable 75 800 840
Cured 90 730 830
> 12% Si High temperature 130 320 340
Copper alloys > 1% Pb Free cutting 110 400 430
Brass 90 400 430
Electrolitic copper 100 270 300
Non-metallic Duroplastics, fiber plastics
Hard rubber
High temp. alloys Fe based Annealed 200 20 40
Fe based Cured 280 20 30
Ni or Co based Annealed 250 20 30
Ni or Co based Cured 350 20 30
Ni or Co based Cast 320 30 70
Titanium and Ti alloys RM 400 30 70
Alpha + beta alloys cured RM 1050 30 70
Hardened steel Hardened 55 HRC 30 50
Hardened 60 HRC 30 40
Chilled cast iron Cast 400 60 80
Cast iron Hardened 55 HRC 30 50
Endmills
ISO Material Condition Tensile Strength
(N/mm2)
Hardness
(HB)
Cutting speed Vc (m/min)
min max
Non-alloy steel and cast steel,
free cutting steel
< 0.25 %C Annealed 420 125 220 230
≥ 0.25 %C Annealed 650 190 170 190
< 0.55 %C Quenched and tempered 850 250 140 150
≥ 0.55 %C Annealed 750 220 140 150
≥ 0.55 %C Quenched and tempered 1000 300 120 130
Low alloy steel and cast steel
(less than 5% all elements)
Annealed 600 200 140 150
Quenched and tempered 930 275 100 110
Quenched and tempered 1000 300 110 120
Quenched and tempered 1200 350 120 130
High alloy steel, cast steel,
and tool steel
Annealed 680 200 110 130
Quenched and tempered 1100 325 60 70
Stainless steel and cast steel Ferritic / martensitic 680 200 100 170
Martensitic 820 240 60 150
Austenitic 600 180 70 100
Grey cast iron (GG) Ferritic / pearlitic 180 70 220
Pearlitic 260 110 200
Nodular cast iron (GGG) Ferritic 160 130 230
Pearlitic 250 70 230
Malleable cast iron Ferritic 130 130 230
Pearlitic 230 110 200
Aluminium-wrought alloy Not cureable 60 670 700
Cured 100 610 690
Aluminium-cast, alloyed ≤ 12% Si Not cureable 75 670 700
Cured 90 610 690
> 12% Si High temperature 130 270 280
Copper alloys > 1% Pb Free cutting 110 330 350
Brass 90 330 350
Electrolitic copper 100 230 250
Non-metallic Duroplastics, fiber plastics
Hard rubber
High temp. alloys Fe based Annealed 200 20 30
Fe based Cured 280 20 20
Ni or Co based Annealed 250 20 20
Ni or Co based Cured 350 20 20
Ni or Co based Cast 320 30 60
Titanium and Ti alloys RM 400 30 60
Alpha + beta alloys cured RM 1050 30 60
Hardened steel Hardened 55 HRC 30 40
Hardened 60 HRC 30 30
Chilled cast iron Cast 400 50 60
Cast iron Hardened 55 HRC 30 40
Ceramic endmill
ISO Material Hardness Max D.O.C
(mm)
Cutting speed
Vc (m/min)
Feed per tooth
(mm/tooth)
ø 6 ø 8 ø 10 ø 12 ø 16 ø 20
cast iron 180- 260HB 0.25-1.0 250 – 1000 0.10 0.15 0.17 0.19 0.23 0.25
Nodular cast iron 160- 250HB 0.25-1.0 250 – 1000 0.10 0.15 0.17 0.19 0.23 0.25
Malleable cast iron 130- 230HB 0.25-1.0 250 – 1000 0.10 0.15 0.17 0.19 0.23 0.25
Non ferrous/graphite products 0.25 – 1.0 500 – 1500 0.10 0.15 0.17 0.19 0.23 0.25
Ni-based superalloys 0.25 – 1.0 250 – 1000 0.10 0.13 0.15 0.18 0.20 0.22
Barrel endmills
ISO Workpiece materials Hardness Priority Grade Cutting speed Vc (m/min) Feed per tooth:
fz (mm/t)
Tool diameter:
DC (mm)
8 10 12
Low carbon steel
SS400, S15C, etc.
E275A, C15E4, etc., C15E, etc.
– 200 HB First choice AH710 210 – 300 0.04 – 0.08 0.05 – 0.1 0.06 – 0.12
Carbon steel, Alloy steel
S55C, SCM440, etc.
C55, 42CrMo4, etc.
– 300 HB First choice AH710 160 – 240 0.024 – 0.064 0.03 – 0.08 0.036 – 0.096
Prehardened steel
PX5, NAK80, etc.
30 – 40 HRC First choice AH710 130 – 200 0.016 – 0.064 0.02 – 0.08 0.024 – 0.096
Stainless steel
SUS304, SUS316, etc.
X5CrNi18-9, X5CrNiMo17-12-3, etc.
First choice AH710 60 – 110 0.016 – 0.056 0.02 – 0.07 0.024 – 0.084
Grey cast iron
FC250, FC300, etc.
250, 300, etc., GG25, GG30, etc.
150 – 250 HB First choice AH710 150 – 275 0.04 – 0.08 0.05 – 0.1 0.06 – 0.12
Ductile cast iron
FCD400, etc.
150 – 250 HB First choice AH710 150 – 200 0.04 – 0.08 0.05 – 0.1 0.06 – 0.12
Titanium alloys
Ti-6AI-4V, etc.
First choice AH710 60 – 90 0.016 – 0.032 0.02 – 0.04 0.024 – 0.048
Heat-resistant alloys
Inconel718, etc.
First choice AH710 20 – 35 0.016 – 0.032 0.02 – 0.04 0.024 – 0.048
Hard material SKD61, etc.
X40CrMoV5-1, etc.
40 – 50 HRC First choice AH710 40 – 80 0.008 – 0.024 0.01 – 0.03 0.012 – 0.036
SKD11, etc.
X153CrMoV12, etc.
50 – 60 HRC First choice AH710 40 – 80 0.008 – 0.024 0.01 – 0.03 0.012 – 0.036

For more information about this product, visit our online e-catalog or download the product report:

Industries

Industries

ПРИМЕНЕНИЕ
Tungaloy’s tooling solutions for a wide variety of components

Учить больше

e-Catalog

e-Catalog

Электронный каталог
Download CAD drawings and 3D models

Учить больше

Resources