알루미늄 및 non-ferrous metals 가공을 위한 최고의 솔루션 – 새로운 DLC 코팅 등급 DS2000 시리즈를 특징으로 하는 제품 라인업 대폭 확장

ISO-insert

Application:
DLC-coated grade for non-ferrous metal ISO turning (e.g., external turning).

Features:

• Excellent built-up edge (BUE) / adhesion resistance, delivering a bright, high-quality surface finish.
• High hardness and heat resistance help suppress wear progression for stable, long tool life.
• Strong coating adhesion supports reliable and stable machining.
• Non-ferrous chipbreaker lineup: AL (positive) / 28 (negative) for improved chip control and reduced chip entanglement.

👉 Best suited when you want stable surface finish and longer tool life in non-ferrous turning, especially where adhesion/BUE is a concern.

 

TungThread

Application:
DLC-coated grade for non-ferrous threading (external/internal), partial-profile type.

Features:

• Enables high thread surface quality while significantly reducing adhesion/BUE on rake and flank faces, helping slow wear.
• Ground, high-precision inserts for consistent thread quality.
• 60° / 55° partial-profile supports both external and internal threads; applicable to ISO metric (M), UN, W, and G threads.

👉 Best suited when you want stable thread quality in non-ferrous materials, minimizing adhesion, surface issues, and rapid wear

TungForce-Rec

Application:
90° square shoulder milling cutter for stable, high-efficiency milling.

Features:

• Unique V-bottom insert and clamping mechanism for stable machining.
• High-rigidity body design and secure insert clamping help prevent insert movement.
• Designed to deliver stable performance even in small-diameter applications.

👉 Best when you want reliable, high-productivity square shoulder milling with strong process stability.

 

Tung-Tri

Application:
Square shoulder milling cutter focused on economy and chatter stability.

Features:

• Economical 3 cutting-edge insert with large rake angle reduces cutting force and improves chip formation.
• Optimized insert flank face and differential pitch on the cutter help suppress chatter.
• Large rake/inclination angles support smooth cutting while maintaining edge strength.

👉 Best when you want cost-efficient, stable shoulder milling with good cutting action.

 

TungAluMill

Application:
High-speed shoulder milling for aluminum and non-ferrous materials.

Features:

• Secure, stable insert clamping design with a unique V-shaped bottom for high-speed machining.
• Cutting edge geometry optimized for aluminum machining.
• Applicable to a wide range of operations (e.g., pocketing/slotting and helical ramping).

👉 Best when you want stable high-speed Al/non-ferrous milling with broad application coverage.

 

DoMultiRec

Application:
Multifunctional milling cutter with center-cutting capability (incl. drilling).

Features:

• Center cutting capability enables multiple operations with a single tool, including drilling.
• Insert integrates a center and peripheral cutting edge on one side.
• Double-sided insert allows up to four indexings (front/back; center/periphery positions).

👉 Best when you want to reduce tool changes and maximize versatility with one cutter.

 

TFE / EFE (TungMill / TFE12, EFE12)

Application:
High-precision face milling focused on surface finish and accuracy.

Features:

• Lightweight facemill body design for high-precision machining.
• Adjustable pockets for extra precision on surface finish.
• Insert pitch (density) variations to select the best balance of economy and productivity.

👉 Best for precision face milling where controlled surface finish is critical.

 

DoPent

Application:
High-speed face milling with superior surface finish (all materials).

Features:

• Economical double-sided pentagonal insert with 10 cutting edges.
• Low cutting force concept supports stable machining.
• Especially suitable for thin or low-rigidity workpieces thanks to reduced cutting/radial forces.

👉 Best when you want low cost per edge + stable, high-speed face milling with good finish.

 

TungMill

Application:
Milling solution for steel and cast iron (face/shoulder/chamfering).

Features:

• Simulation-based design provides a lightweight cutter with low cutting load while maintaining rigidity.
• TPW/EPW type features a 4-corner insert design balancing sharpness and edge strength.
• 45° and 90° cutting edge angle supports square shoulder milling and face milling around obstacles/fixtures.

👉 Best for steel/cast-iron milling where you want accuracy, efficiency, and stable cutting behavior.

특징 1: 뛰어난 부착 방지 성능을 통한 고품질 가공 표면 달성

• 새로 개발된 DLC 코팅은 알루미늄 및 non-ferrous metals와의 부착을 크게 억제합니다.
• 구성인선 형성을 방지하여 광택 있고 고정밀 표면 조도를 제공합니다.
• 안정적인 표면 품질은 2차 마감 작업의 필요성을 줄입니다.

특징 2: 높은 경도와 내열성을 통한 연장된 공구 수명

• DLC 필름의 높은 경도는 인선 마모 진행을 최소화합니다.
• 뛰어난 내열성은 고속 및 고효율 가공에서도 안정적인 성능을 보장합니다.
• 공구 교체 빈도를 줄이고 전반적인 비용 절감에 기여합니다.

특징 3: 광범위한 가공 Application을 위한 안정적인 성능

• 강력한 코팅 부착력은 선삭, 나사 가공, 밀링과 같은 다양한 작업 전반에 걸쳐 안정적인 절삭 성능을 제공합니다.
• DS2005 등급은 고속 가공을 위한 내마모성을 향상시켜 더 긴 공구 수명을 달성합니다.
• DS2015 등급은 내마모성 및 내치핑성의 뛰어난 균형을 제공하여 광범위한 조건에서 안정적인 가공을 가능하게 합니다.