SolidDrill (DSW, DSM)

product_Holemaking_Holemaking_SolidDrill

Coated solid carbide drill for excellent stability

Ideal combination of drill geometry and carbide composition for exceptional performance on a wide range of drilling applications

Applications & Features

DrillingSmall-diameter drillingCoolant hole

1. New coated grade with highly improved wear resistance

• New coated carbide grade with a high level of versatility. Perfect grade for stable and long tool life on a wide range of materials.

2. Innovative cutting edge offers reliable drilling

• Non-conventional edge shape reduces cutting forces and improves adhesion strength of the coating to prevent sudden edge breakage.

3. World-wide standard shank style – Standardized with DIN6535-Form HA

• Only 6 shank size diameters available – ø6, ø8, ø10, ø12, ø14, ø16 mm. This reduces the number of collets required.

1. Variety of dimensions and L/D

• Allows deep hole drilling up to 5 to 15 times the drill diameter.
• Available as standard items from ø0.1 to ø3.0 mm in 0.01 mm increments. Shank diameters are all unified to ø3 mm.

2. Center drills for machining guide hole

• DSM-CP140 type has a 140° point angle which can effectively prevent the cutting edge from chipping.
• DSM-CP90 type, which has a 90° point angle, can be also used for chamfering of the hole mouth.

Drill bodies & Grades

Drill bodies

DSW-DI (ø3 – ø12 mm)

  • With coolant hole type

DSW-DE (ø3 – ø12 mm)

  • Without coolant hole. Economical type

DSW-CI (ø3 – ø10 mm)

  • Cylindrical shank, with coolant holes

DSM (ø0.1 – ø3 mm)

  • Small dia. solid carbide drill, L/D (ULDR) = 5 – 15

DSM-CP (ø3 mm)

  • Drills for center hole
Main Grades

AH725

  • P15 – P30 / M15 – M30 / K25 – K30 / S15 – S25
  • Good balance between wear and chipping resistance
  • Suitable for machining steel and stainless steel under general cutting conditions

YH170

  • P20 – P35 / M20 – M35
  • High resistance to wear and fracture
  • Designed for drilling carbon steel and stainless steel

YH180

  • High wear resistance
  • Designed for drilling carbon steel and stainless steel

Practical examples

Part:  Machine parts
Material: C55  (ISO) 
Drill body: DSW103-040-12DE3
Hole diameter: øDc = 10.3 (mm)
Grade: AH725
Cutting conditions: Vc = 50 (m/min)
f = 0.3 (mm/rev)
H = 24 (mm)
Coolant: Wet (External)
Machine: Horizontal MC

Standard cutting conditions

DSW-DE (External supply)
ISO Workpiece material Brinell hardness
(HB)
Cutting speedVc (m/min) Feed: f (mm/rev)
ø3 – ø6 ø6 – ø10 ø10 – ø16 ø3 – ø6 ø6 – ø10 ø10 – ø12
Low carbon steels (C < 0.3)
SS400, SM490, S25C, etc.
C15E4, E275A, E355D, etc.
– 180 40 – 100 60 – 120 60 – 130 0.15 – 0.3 0.15 – 0.35 0.2 – 0.5
Carbon steels (C > 0.3)
S45C, S55C, , etc.
C45, C55, etc.
180 – 300 40 – 90 50 – 120 60 – 130 0.15 – 0.3 0.15 – 0.35 0.2 – 0.4
High alloy steels
SCM440, etc.
42CrMo4, etc.
250 – 350 40 – 80 50 – 100 50 – 100 0.1 – 0.2 0.15 – 0.3 0.15 – 0.35
Stainless steels
SUS304, etc.
X5CrNi18-9, etc.
– 200 20 – 40 30 – 50 30 – 60 0.05 – 0.2 0.1 – 0.25 0.1 – 0.3
Grey cast irons
FC300, etc.
250, etc.
– 200 40 – 90 50 – 95 50 – 100 0.15 – 0.3 0.2 – 0.4 0.2 – 0.5
Ductile cast irons
FCD450, etc.
450-10S, etc.
– 300 30 – 80 40 – 90 45 – 90 0.1 – 0.3 0.2 – 0.4 0.2 – 0.4
Aluminium alloys
ADC12, etc.
AlSi11Cu3, etc.
40 – 90 50 – 100 50 – 100 0.15 – 0.3 0.2 – 0.4 0.2 – 0.5
Titanium alloys
Ti-6Al-4V, etc.
20 – 40 20 – 40 20 – 40 0.1 – 0.2 0.15 – 0.25 0.15 – 0.4
Heat-resistant alloys, Inconel
Inconel 718, etc.
250 – 10 – 30 10 – 30 10 – 30 0.03 – 0.07 0.05 – 0.1 0.07 – 0.12
High hardened steels
SKD11, etc.
X153CrMoV12, etc.
– 40HRC 20 – 40 20 – 40 20 – 40 0.05 – 0.15 0.05 – 0.15 0.05 – 0.2
  • The cutting parameters shown in the table are merely a starting guideline for general machining. Values should be varied depending on the power or rigidity of the machine to be used. Optimum conditions should be selected depending on the actual chip control or damage on edges.
  • When using the smaller diameter tools in each range, set the feed “f” to the lower recommended values.
  • The coolant supply is critical for the provision of stable machining conditions and enhanced tool life. A large coolant volume should be supplied, especially when drilling difficult-to-cut materials.
  • When drilling stainless steel with low machinability such as austenitic stainless steel with a depth deeper than L/D = 3, a pecking cycle or internal coolant supply is recommended.
DSW-DI (Internal supply)
ISO Workpiece material Brinell hardness
(HB)
Cutting speedVc (m/min) Feed: f (mm/rev)
ø3 – ø6 ø6 – ø10 ø10 – ø16 ø3 – ø6 ø6 – ø10 ø10 – ø12
Low carbon steels (C < 0.3)
SS400, SM490, S25C, etc.
C15E4, E275A, E355D, etc.
– 180 70 – 140 80 – 160 90 – 190 0.15 – 0.3 0.15 – 0.35 0.2 – 0.5
Carbon steels (C > 0.3)
S45C, S55C, , etc.
C45, C55, etc.
180 – 300 50 – 130 70 – 160 80 – 170 0.15 – 0.3 0.15 – 0.35 0.2 – 0.4
High alloy steels
SCM440, etc.
42CrMo4, etc.
250 – 350 40 – 100 60 – 140 60 – 160 0.1 – 0.2 0.15 – 0.3 0.15 – 0.35
Stainless steels
SUS304, etc.
X5CrNi18-9, etc.
– 200 25 – 75 50 – 100 50 – 120 0.05 – 0.2 0.1 – 0.25 0.1 – 0.3
Grey cast irons
FC300, etc.
250, etc.
– 200 80 – 140 100 – 160 100 – 180 0.15 – 0.3 0.2 – 0.4 0.2 – 0.45
Ductile cast irons
FCD450, etc.
450-10S, etc.
– 300 70 – 140 80 – 150 80 – 170 0.1 – 0.3 0.2 – 0.4 0.2 – 0.45
Aluminium alloys
ADC12, etc.
AlSi11Cu3, etc.
60 – 200 60 – 200 60 – 200 0.15 – 0.3 0.2 – 0.4 0.2 – 0.5
Titanium alloys
Ti-6Al-4V, etc.
20 – 60 30 – 80 30 – 80 0.1 – 0.2 0.1 – 0.25 0.15 – 0.4
Heat-resistant alloys, Inconel
Inconel 718, etc.
250 – 10 – 30 10 – 40 10 – 40 0.03 – 0.07 0.05 – 0.1 0.07 – 0.15
High hardened steels
SKD11, etc.
X153CrMoV12, etc.
– 40HRC 20 – 50 30 – 60 30 – 60 0.05 – 0.15 0.05 – 0.15 0.05 – 0.2
  • The cutting parameters shown in the table are merely a starting guideline for general machining. Values should be varied depending on the power or rigidity of the machine to be used. Optimum conditions should be selected depending on the actual chip control or damage on edges.
  • When using the smaller diameter tools in each range, set the feed “f” to the lower recommended values.
  • Oil holes that become blocked may cause drill breakages. A fi lter to prevent the circulation of chips must be used on the coolant supply system.
DSW-CI (16xD, 20xD)
ISO Workpiece material Cutting speed
Vc (m/min)
Feed: f (mm/rev)
Tool diameter: DC (mm)
ø3 – ø5 ø5.1 – ø8 ø8.1 – ø10
Low carbon steels (C < 0.3)
SS400, SM490, S25C, etc.
C15E4, E275A, E355D, etc.
70 – 90 0.1 – 0.18 0.1 – 0.2 0.1 – 0.25
High carbon steels (C > 0.3)
S45C, S55C, etc.
C45, C55, etc.
70 – 90 0.1 – 0.18 0.1 – 0.2 0.1 – 0.25
Low alloy steels
SCM415, etc.
18CrMo4, etc.
70 – 90 0.1 – 0.18 0.1 – 0.2 0.1 – 0.25
Alloy steels
SCM440, SCr420, etc.
42CrMo4, 20Cr4, etc.
75 – 85 0.08 – 0.14 0.08 – 0.18 0.12 – 0.2
Stainless steels
SUS304, SUS316, etc.
X5CrNi18-9,
X5CrNiMo17-12-2, etc.
55 – 65 0.04 – 0.12 0.08 – 0.16 0.1 – 0.18
Grey cast irons
FC250, etc.
GG25, etc.
80 – 100 0.14 – 0.24 0.16 – 0.26 0.18 – 0.3
Ductile cast irons
FCD700, etc.
GGG70, etc.
80 – 100 0.14 – 0.24 0.16 – 0.26 0.18 – 0.3
Titanium alloys
Ti-6Al-4V, etc.
35 – 45 0.06 – 0.12 0.08 – 0.16 0.1 – 0.18
Nickel-based alloys 30 – 40 0.06 – 0.12 0.08 – 0.16 0.1 – 0.18
DSW-CI (30xD)
ISO Workpiece material Cutting speed
Vc (m/min)
Feed: f (mm/rev)
Tool diameter: DC (mm)
ø3 – ø5 ø5.1 – ø8 ø8.1 – ø10
Low carbon steels (C < 0.3)
SS400, SM490, S25C, etc.
C15E4, E275A, E355D, etc.
70 – 90 0.08 – 0.11 0.12 – 0.17 0.1 – 0.22
High carbon steels (C > 0.3)
S45C, S55C, etc.
C45, C55, etc.
70 – 90 0.08 – 0.11 0.12 – 0.17 0.1 – 0.22
Low alloy steels
SCM415, etc.
18CrMo4, etc.
70 – 90 0.08 – 0.11 0.12 – 0.17 0.1 – 0.22
Alloy steels
SCM440, SCr420, etc.
42CrMo4, 20Cr4, etc.
75 – 85 0.06 – 0.09 0.08 – 0.14 0.1 – 0.18
Stainless steels
SUS304, SUS316, etc.
X5CrNi18-9,
X5CrNiMo17-12-2, etc.
55 – 65 0.04 – 0.1 0.08 – 0.14 0.1 – 0.16
Grey cast irons
FC250, etc.
GG25, etc.
80 – 100 0.14 – 0.22 0.16 – 0.26 0.18 – 0.25
Ductile cast irons
FCD700, etc.
GGG70, etc.
80 – 100 0.14 – 0.22 0.16 – 0.24 0.18 – 0.25
Titanium alloys
Ti-6Al-4V, etc.
35 – 45 0.06 – 0.1 0.08 – 0.12 0.1 – 0.13
Nickel-based alloys 30 – 40 0.06 – 0.1 0.08 – 0.12 0.08 – 0.13
DSM
ISO Workpiece material Hardness Cutting speedVc (m/min) Feed: f (mm/rev)
ø0.1 – ø0.3 ø0.31 – ø0.5 ø0.51 – ø3 ø0.1 – ø0.3 ø0.31 – ø0.5 ø0.51 – ø1 ø1.01 – ø2 ø2.01 – ø3
Carbon steels,
Alloy steels
– 300HB 5 – 20 15 – 30 25 – 60 0.001 – 0.004 0.002 – 0.01 0.005 – 0.05 0.03 – 0.09 0.05 – 0.1
Stainless steels – 200HB 2 – 12 6 – 18 10 – 20 0.0005 – 0.004 0.002 – 0.008 0.005 – 0.03 0.01 – 0.04 0.02 – 0.05
Grey cast irons 150 – 250HB 5 – 15 10 – 25 20 – 50 0.0005 – 0.004 0.002 – 0.012 0.005 – 0.03 0.01 – 0.06 0.03 – 0.12
Ductile cast irons 150 – 250HB 5 – 15 10 – 25 20 – 50 0.001 – 0.003 0.002 – 0.01 0.005 – 0.02 0.01 – 0.05 0.03 – 0.1
Aluminium alloys 10 – 20 10 – 30 20 – 50 0.001 – 0.01 0.005 – 0.03 0.01 – 0.05 0.04 – 0.15 0.06 – 0.2
Copper / Brass 10 – 20 10 – 30 20 – 50 0.001 – 0.01 0.005 – 0.03 0.01 – 0.05 0.04 – 0.15 0.06 – 0.2
Heat-resistant alloys – 40HRC 2 – 6 5 – 10 8 – 20 0.0005 – 0.003 0.002 – 0.004 0.002 – 0.004 0.002 – 0.004
High hardened steels – 50HRC 4 – 8 6 – 10 6 – 16 0.0005 – 0.002 0.001 – 0.005 0.005 – 0.02 0.01 – 0.03 0.02 – 0.06

※ Not recommended

  • When the drilling depth is deeper than L/D = 5, use drill pecking every 10 to 50% of the drill diameter.
  • The above cutting conditions are applied to when a water soluble cutting fluid is used. For drilling a hole smaller than ø0. 3 mm, use of a starting drill is recommended.
  • When setting the drill, the drill runout should be within 0.002 mm on the taper. (Especially for the drill diameter smaller than ø0.5 mm)
DSM-CP
ISO Workpiece material Hardness Cutting speedVc (m/min) Feed: f (mm/rev)
DSM-CP90 DSM-CP140
Carbon, Mild and Alloy steels – 300HB 30 – 80 0.01 – 0.06 0.03 – 0.08
Stainless steels – 200HB 15 – 40 0.01 – 0.03 0.02 – 0.06
Grey and ductile cast irons 150 – 250HB 30 – 80 0.02 – 0.06 0.05 – 0.1
Aluminium alloys 60 – 120 0.02 – 0.1 0.05 – 0.15
High hardened steels – 45HRC 10 – 40 0.01 – 0.05

※ Not recommended

  • Use DSM-CP140 for drilling hard materials and stainless steel that have work-hardening characteristic.
  • The above cutting conditions are designed when using water-soluble cutting fluid, in which case, set the cutting speed to the lower side of the range.

For more information about this product, visit our online e-catalog or download the product
report:

Industries

Industries

Industries
Tungaloy’s tooling solutions for a wide variety of components

Learn more

e-Catalog

e-Catalog

e-Catalog
Download CAD drawings and 3D models

Learn more

자료