This calculator allows you to analyze the benefits of switching from your current solid drill to our head exchangeable drill, DrillMeister.
By entering values in the following fields, you can calculate the expected tool life of DrillMeister for the same tool cost you spend on your current solid drill (break-even point) and the expected annual savings from the extended tool life.
Representative values are pre-filled in each field, but please modify them according to your situation and check the results.
* Click here to see examples of extended tool life with DrillMeister
* Click here to see the benefits in tool management after switching to DrillMeister
Current Solid Drill
*required fieldsYou will be able to save…
Tool Cost of Current Solid Drill
Tool cost per hole of current tool | 0.025USD |
---|---|
Annual tool cost of current tool | 11,760USD per year |
Recommended Items with DrillMeister
Recommended head description | DMC100 AH9130 |
---|---|
Recommended drill holder description | TID100F16-5 |
Break-Even Point for Switching to DrillMeister
Tool life in number of holes for the same tool cost of the current solid drill | 1,918holes |
---|---|
(Tool life in drilling length for the same tool cost of the current solid drill) | 96inch * Click here to see examples of extended tool life with DrillMeister |
Tool Cost Reduction Target and Effect
When aiming to reduce tool cost by 30% compared to the current solid drill
Required tool life in number of holes | 2,741holes |
---|---|
(Required tool life in drilling length) | 137inch |
Annual cost reduction | 3,528USD per year |
When aiming to reduce tool cost by 50% compared to the current solid drill
Required tool life in number of holes | 3,837holes |
---|---|
(Required tool life in drilling length) | 192inch |
Annual cost reduction | 5880USD per year |
Notes and Disclaimers
- The tool cost calculation for DrillMeister assumes no regrinding or recoating.
- The tool life of the drill body of DrillMeister (Head dia. ø6.0 – 25.9) is calculated assuming the drill body will be replaced after using 30 drill heads.
- The tool life of the drill body of AddlMeisterDrill (Head dia. ø4.0 – 5.9) is calculated assuming the drill body will be replaced after using 10 drill heads.
- The simulation results do not guarantee the actual effects. Please note that the actual effects may vary depending on individual circumstances.
Featured Product
Hole Making
Exchangeable head drill
DrillMeister
High productive head-changeable drill