Iwaki, Japan – November, 2026 – Tungaloy Corporation (President: Satoshi Kinoshita, Head Office: Iwaki City, Fukushima Prefecture) announces the expansion of its MillQuadFeed high-feed milling cutter lineup with reduced-neck bodies and an ø80 mm bore type, helping prevent chip jamming and significantly improve machining stability.

Challenges and Trends
When machining deep pockets in molds, aircraft components, and heavy equipment parts, chips can become trapped in the pocket and re-cut by the cutter, potentially compromising part quality and process stability. This problem is particularly pronounced with conventional cylindrical-shank cutters because there is insufficient clearance between the cutter body and the workpiece wall. In addition, conventional bore type are limited to a maximum diameter of 66 mm, restricting the cutting width achievable in a single pass and increasing the number of passes required, which reduces productivity. To address these issues, there is a growing need for an expanded cutter lineup that can handle a wider range of machining applications.
Product Overview
The MillQuadFeed is a high-feed milling cutter series with cutter bodies that accommodate two insert types with different entering angles: one with a large entering angle and the other with a small entering angle. This allows users to select the optimum entering angle for the workpiece material and cutting conditions, achieving high productivity and long tool life. The flat-top design of the inserts improves resistance to edge chipping, ensuring reliable performance when machining difficult-to-cut materials and at large depths of cut. The series supports a wide range of workpiece materials and machining applications, helping improve productivity across diverse manufacturing environments.

Benefits and Features
Feature 1:Reduced-Neck Body Design Provides Ample Clearance and Improves Chip Evacuation
– The reduced-neck profile, with a shank diameter smaller than the cutting diameter, provides ample clearance between the cutter body and the workpiece wall.
– This clearance facilitates machining of deep pockets and complex contours while minimizing interference between the cutter and workpiece.
– Smooth chip evacuation helps prevent chips from jamming or accumulating around the cutter, ensuring stable machining.
Feature 2: ø80 mm bore type Enables Wider Cuts and Improves Machining Efficiency
– The lineup now includes an ø80 mm bore type, expanding its size range beyond the previous maximum diameter of ø66 mm and allowing wider cuts to be completed in a single pass.
– Fewer passes increase throughput and productivity.
– This wider cutting capacity improves productivity and helps reduce production costs.
