Friction Materials

1. Friction coefficient of the brake pad materials varies depending on the use

2910, 2172A (Friction coefficient: over 0.55) – Used for front brakes of middle to large motorcycles.
2802, 2138, 2605 (around 0.5), 2161B (around 0.45) – Used for front and rear brakes of middle to large motorcycles, ATVs, side-by-sides, and MUVs.

We also provide friction materials for parking brakes with high friction coefficient.

* 2161B is superior in sand abrasion resistance and used for off-road vehicles as well.

2. Friction materials used in wet condition are categorized into two types: sintered 1020 and organic G525, G517, and P21

1020 – Used for transmissions in middle to large construction machines.
G525 – Used for transmissions in middle to large construction machines.

* G525 holds high energy absorption ratio, elasticity, and heat resistance, and is used for small-sized transmissions due to its higher durability than 1020.

Tungaloy´s friction materials are utilized in various vehicles because of its excellent friction property

Brakes Under Dry Condition
Motorcycles, ATVs, side-by-sides, MUVs, construction machines, cranes, elevators

Brakes Under Wet Condition
Press machines

Clutches Under Wet Condition
Middle to large construction machines, dump trucks

Clutches Under Dry Condition
Middle to large construction machines, racing cars, trucks

Parking Brakes Under Dry Condition
Motorcycles, ATVs, side-by-sides, MUVs, construction machines