ISO-EcoTurn

Cost effective: Identical cutting performance, only smaller

ISO-EcoTurn Small size inserts, for an economical advantage

GNMG/FNMG

Applications & Features

Inserts & Grades

Toolholders

Practical examples

Standard cutting conditions

CN/DN/TN/VN/WN

ISO	Application	Chipbreaker	Grades	Depth of cut ap (mm)	Feed f (mm/rev)	Cutting speed: Vc (m/min)
ISO	Application	Chipbreaker	Grades	Depth of cut ap (mm)	Feed f (mm/rev)	Low carbon steels Alloy steels	Medium carbon steelsAlloy steels	High carbon steels Alloy steels
	Precision finishing	TF	T9215	0.1 – 0.5	0.03 – 0.15	150 – 400	150 – 400	120 – 300
	Precision finishing	TF	T9225	0.1 – 0.5	0.03 – 0.15	120 – 300	120 – 300	100 – 250
	Finishing	TSF	NS9530	0.2 – 1.5	0.08 – 0.4	150 – 250	80 – 220	80 – 180
			GT9530	0.2 – 1.5	0.08 – 0.4	150 – 300	80 – 250	80 – 200
			AT9530	0.2 – 1.5	0.08 – 0.4	150 – 300	80 – 250	80 – 200
			T9215	0.2 – 1.5	0.08 – 0.4	150 – 400	150 – 400	120 – 300
			T9225	0.2 – 1.5	0.08 – 0.4	120 – 300	120 – 300	100 – 250
		ZF	T9215	0.2 – 1.5	0.07 – 0.2	150 – 400	150 – 400	120 – 300
		ZF	T9225	0.2 – 1.5	0.07 – 0.2	120 – 300	120 – 300	100 – 250
	Finishing (Wiper)	FW	T9205	0.2 – 1.5	0.08 – 0.4	180 – 400	180 – 400	150 – 350
			T9215	0.2 – 1.5	0.08 – 0.4	150 – 400	150 – 400	120 – 300
			T9225	0.2 – 1.5	0.08 – 0.4	120 – 300	120 – 300	100 – 250
			NS9530	0.5 – 1.5	0.2 – 0.4	150 – 250	80 – 220	80 – 180
			GT9530	0.5 – 1.5	0.2 – 0.4	150 – 300	80 – 250	80 – 200
	Finishing to medium cutting	ZM	T9215	0.7 – 2	0.15 – 0.4	150 – 400	150 – 400	120 – 300
	Finishing to medium cutting	ZM	T9225	0.7 – 2	0.15 – 0.4	120 – 300	120 – 300	100 – 250
	Finishing to medium cutting (Wiper)	SW	T9205	0.5 – 2	0.3 – 0.6	180 – 400	180 – 400	150 – 350
			T9215	0.5 – 2	0.3 – 0.6	150 – 400	150 – 400	120 – 300
			T9225	0.5 – 2	0.3 – 0.6	120 – 300	120 – 300	100 – 250
	Finishing to medium cutting	NM	T9225	0.5 – 2	0.15 – 0.4	120 – 300	120 – 300	100 – 250
	Medium cutting	TM	T9215	1 – 3	0.2 – 0.5	150 – 400	150 – 400	120 – 300
	Medium cutting	TM	T9225	1 – 3	0.2 – 0.5	120 – 300	120 – 300	100 – 250
						Austenitic stainless steel	Ferritic / martensite stainless steel	Precipitation hardened stainless steel
	Finishing	SS	AH630	0.5 – 3	0.08 – 0.2	90 – 190	110 – 210	60 – 90
	Finishing	SS	AH645	0.5 – 3	0.08 – 0.2	70 – 150	90 – 170	–
	Medium cutting	SM	T6120	1 – 3	0.2 – 0.5	140 – 240	160 – 280	80 – 150
			T6130	1 – 3	0.2 – 0.5	100 – 200	120 – 240	70 – 110
			AH630	1 – 3	0.2 – 0.5	90 – 190	110 – 210	60 – 90
						Grey cast irons	Ductile cast irons
	Finishing to medium cutting (Wiper)	SW	T5115	0.5 – 2	0.3 – 0.6	140 – 400	140 – 370
	Medium cutting	TM	T515	1 – 3	0.2 – 0.5	150 – 700	140 – 370
						Titanium alloys	Ni-base alloys
	Medium cutting	TM	AH8015	1 – 3	0.2 – 0.5	20 – 150	20 – 100

GN/FN

ISO	Operation	Chipbreaker	Grade	Depth of cut ap (mm)	Feed f (mm/rev)	Cutting speed: Vc (m/min)
ISO	Operation	Chipbreaker	Grade	Depth of cut ap (mm)	Feed f (mm/rev)	Low carbon steel, alloy steel	Medium carbon steel, alloy steel	High carbon steel, alloy steel
	Finishing	TSF	T9215	0.2 – 1.5	0.08 – 0.4	150 – 400	150 – 400	120 – 300
	Finishing	TSF	T9225	0.2 – 1.5	0.08 – 0.4	120 – 300	120 – 300	100 – 250
	Medium cutting	TM	T9215	1 – 3	0.2 – 0.5	150 – 400	150 – 400	120 – 300
	Medium cutting	TM	T9225	1 – 3	0.2 – 0.5	120 – 300	120 – 300	100 – 250
ISO	Operation	Chipbreaker	Grade	Depth of cut ap (mm)	Feed f (mm/rev)	Stainless steel
	Finishing	TSF	T9215	0.2 – 1.5	0.08 – 0.4	100 – 250
			T9225	0.2 – 1.5	0.08 – 0.4	100 – 250
			AH8015	0.2 – 1.5	0.08 – 0.4	90 – 190
	Medium cutting	TM	T9215	1 – 3	0.2 – 0.5	100 – 250
			T9225	1 – 3	0.2 – 0.5	100 – 250
			AH8015	1 – 3	0.2 – 0.5	90 – 190
ISO	Operation	Chipbreaker	Grade	Depth of cut ap (mm)	Feed f (mm/rev)	Cast iron
	Finishing	TSF	T9215	0.2 – 1.5	0.08 – 0.4	140 – 500
	Finishing	TSF	T9225	0.2 – 1.5	0.08 – 0.4	140 – 500
	Medium cutting	TM	T9215	1 – 3	0.2 – 0.5	140 – 500
	Medium cutting	TM	T9225	1 – 3	0.2 – 0.5	140 – 500
ISO	Operation	Chipbreaker	Grade	Depth of cut ap (mm)	Feed f (mm/rev)	Heat-resistant alloys
	Finishing	TSF	AH8015	0.2 – 1.5	0.08 – 0.4	20 – 80
	Medium cutting	TM	AH8015	1 – 3	0.2 – 0.5	20 – 80

For more information about this product, visit our online e-catalog or download the product report:

e-Catalog

Metric | Imperial

PDF

Metric

Main product report_No. 426-G

Imperial

Main product report_No. 426-US

BACK

Online shop

Online shop
Find and order tools online

Learn more

e-Catalog

e-Catalog
Download CAD drawings and 3D models

Part:	Machine part
Material:	SCM415
Toolholder:	AWLNR2525M0604-A
Insert:	WNMG060408E-TM
Grade:	T9215
Cutting conditions:	Vc = 240 (m/min) f = 0.1 – 0.25 (mm/rev) ap = 1 (mm) Application: External face turning Coolant: Wet

Part:	Shaft
Material:	S45C / C45
Toolholder:	ADJNR2525M1104-A
Insert:	DNMG110408E-TSF
Grade:	T9215
Cutting conditions:	Vc = 260 (m/min) f = 0.2 (mm/rev) ap = 1 (mm) Application: External turning Coolant: Wet

ISO-EcoTurn

Cost effective: Identical cutting performance, only smaller

Applications & Features

Applications

Features

1. Over 75%* of the turning market only uses a depth of cut at or less than 3 mm

2. Chip control

3. Uncompromising insert performance

Inserts & Grades

Inserts

C-type Inserts

G-type Inserts

D-type Inserts

F-type Inserts

T-type Inserts

V-type Inserts

W-type Inserts

Main Grades

T9215

T6130

T515

Toolholders

External turning

ISO-EcoTurn Toolholders

Internal turning

ISO-EcoTurn Toolholders

Practical examples

Example #1

General Engineering

Example #2

Automotive Industry

Standard cutting conditions

CN/DN/TN/VN/WN

GN/FN

e-Catalog

PDF

Metric

Imperial

Search

Related News

TungTurn-Jet Offers New Toolholder with Streamlined Coolant Nozzle Design

ISO-EcoTurn to Include GNMG and FNMG Inserts for Better Chip Control During Profile Turning

ISO-EcoTurn to Include New Insert Geometries for Expanded Coverage

Online shop

Learn more

e-Catalog

Learn more

Resources

SNS – Global

SNS – PT. Tungaloy Indonesia