Tungaloy´s advanced selector empowers you to identify the ideal thread tool by inputting both the thread specifications and details about the work material. Navigate through the dropdown options to access comprehensive tool information and recommended machining conditions tailored to the specific thread specifications you’ve chosen. It’s important to note that this selector is tailored specifically for right-hand thread machining.
Thread standard
Thread specifications
*Please enter the required fields
Tools and machining conditions
Recommended insert (with wiper edge)
| Insert description | |
|---|---|
| Holder description | |
| 8×8 Holder description | |
| 10×10 Holder description | |
| 12×12 Holder description | |
| 16×16 Holder description | |
| 20×20 Holder description | |
| 25×25 Holder description | |
| 32×32 Holder description | |
| Anvil description |
Cutting conditions
| Recommended cutting conditions Vc (m/min) | |
|---|---|
| Feed f (mm/rev) | |
| Pitch (mm) |
Thread dimensions
| Target outer diameter before machining (mm) | |
|---|---|
| Outer diameter tolerance (mm) ※M threads indicate a thread grade of 6g, and UNC threads indicate a thread grade of 2A |
|
| Pitch diamter tolerance (mm) ※M threads indicate a thread grade of 6g, and UNC threads indicate a thread grade of 2A |
Number of cutting passes
| Thread height | |
|---|---|
| Total depth of cut | |
| Total number of passes | |
| Depth of cut per a pass | |
| 1st Pass | |
| 2nd Pass | |
| 3rd Pass | |
| 4th Pass | |
| 5th Pass | |
| 6th Pass | |
| 7th Pass | |
| 8th Pass | |
| 9th Pass | |
| 10th Pass | |
| 11th Pass | |
| 12th Pass | |
| 13th Pass | |
| 14th Pass | |
| 15th Pass | |
| 16th Pass | |
| 17th Pass | |
| 18th Pass | |
| 19th Pass | |
| 20th Pass | |
| 21th Pass | |
| 22th Pass |
Recommended insert (without wiper edge)
| Insert description | |
|---|---|
| Holder description | |
| 8×8 Holder description | |
| 10×10 Holder description | |
| 12×12 Holder description | |
| 16×16 Holder description | |
| 20×20 Holder description | |
| 25×25 Holder description | |
| 32×32 Holder description | |
| Anvil description |
Cutting conditions
| Recommended cutting conditions Vc (m/min) | |
|---|---|
| Feed f (mm/rev) | |
| Pitch (mm) |
Thread dimensions
| Target outer diameter before machining (mm) | |
|---|---|
| Outer diameter tolerance (mm) ※M threads indicate a thread grade of 6g, and UNC threads indicate a thread grade of 2A |
|
| Pitch diamter tolerance (mm) ※M threads indicate a thread grade of 6g, and UNC threads indicate a thread grade of 2A |
Number of cutting passes
| Thread height | |
|---|---|
| Total depth of cut | |
| Total number of passes | |
| Depth of cut per a pass | |
| 1st Pass | |
| 2nd Pass | |
| 3rd Pass | |
| 4th Pass | |
| 5th Pass | |
| 6th Pass | |
| 7th Pass | |
| 8th Pass | |
| 9th Pass | |
| 10th Pass | |
| 11th Pass | |
| 12th Pass | |
| 13th Pass | |
| 14th Pass | |
| 15th Pass | |
| 16th Pass | |
| 17th Pass | |
| 18th Pass | |
| 19th Pass | |
| 20th Pass | |
| 21th Pass | |
| 22th Pass | |
| 23th Pass | |
| 24th Pass |
Notes and Cautions
- The machining conditions displayed are reference values. Please verify the dimensions with a thread gauge or micrometer after machining.
Industries |
|
ПРИМЕНЕНИЕ Учить больше |
e-Catalog |
|
Электронный
каталог Учить больше |
Resources
Tungaloy APP
TUNG NaviTool recommendations for your specific needs
Machine Power Calculator
Turning Insert Selection Guide
Tungaloy Success ReportExplore Tungaloy’s TSR for custom machining insights with easy search
Technical GuidesAccess Tungaloy’s technical guides for valuable insights, references, and resources.
MatrixTool management system
Special tool drawing generatorQuickly generate simple drawings for special products.