Machining program compensation for wiper SW/FW insert
Compensations for DNMG / TNMG -SW / -FW
Compensations④Internal, External and Face turning
Compensate the NC program as described in ④ below.
Compensations④ Tool offsets (Compensations for X- and Z-axis)
Match the insert approach angle and the insert style to find the value and compensate the machining program for the insert radius.
*This compensation procedure will not be necessary if the insert is compensated with the built-in tool presetter after insert replacement.
| Nose Radius |
X-axis direction |
Z-axis direction |
|---|---|---|
| R0.4 | 0.24 | 0.03 |
| R0.8 | 0.23 | 0.04 |
| R1.2 | 0.12 | 0.03 |
| Nose Radius |
X-axis direction |
Z-axis direction |
|---|---|---|
| R0.4 | 0.24 | 0.04 |
| R0.8 | 0.21 | 0.05 |
| R1.2 | 0.16 | 0.04 |
| Nose Radius |
X-axis direction |
Z-axis direction |
|---|---|---|
| R0.4 | 0.24 | 0.02 |
| R0.8 | 0.21 | 0.02 |
| R1.2 | 0.15 | 0.02 |
| Nose Radius |
X-axis direction |
Z-axis direction |
|---|---|---|
| R0.4 | 0.02 | 0.24 |
| R0.8 | 0.02 | 0.21 |
| R1.2 | 0.02 | 0.15 |